On Tue, 06 Jun 2023 17:45:33 +0800, Billy Tsai wrote: > Add device binding for aspeed pwm-tach device which is a multi-function > device include pwm and tach function. > > Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> > > --- > .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 76 +++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dts:37.15-28: Warning (reg_format): /example-0/pwm-tach@1e610000/tach/fan@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dts:36.19-38.15: Warning (avoid_default_addr_size): /example-0/pwm-tach@1e610000/tach/fan@0: Relying on default #address-cells value Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dts:36.19-38.15: Warning (avoid_default_addr_size): /example-0/pwm-tach@1e610000/tach/fan@0: Relying on default #size-cells value Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230606094535.5388-4-billy_tsai@xxxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
