For PHYs that call rtl821x_probe() where an external clock can be
configured, make sure that the clock is disabled
when ->suspend() is called and enabled on resume.
The PHY_ALWAYS_CALL_SUSPEND is added to ensure that the suspend function
is actually always called.
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
---
drivers/net/phy/realtek.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index b13dd0b3c99e..894172a3e15f 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -426,10 +426,31 @@ static int rtl8211f_config_init(struct phy_device *phydev)
return genphy_soft_reset(phydev);
}
+static int rtl821x_suspend(struct phy_device *phydev)
+{
+ struct rtl821x_priv *priv = phydev->priv;
+ int ret = 0;
+
+ if (!phydev->wol_enabled) {
+ ret = genphy_suspend(phydev);
+
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(priv->clk);
+ }
+
+ return ret;
+}
+
static int rtl821x_resume(struct phy_device *phydev)
{
+ struct rtl821x_priv *priv = phydev->priv;
int ret;
+ if (!phydev->wol_enabled)
+ clk_prepare_enable(priv->clk);
+
ret = genphy_resume(phydev);
if (ret < 0)
return ret;
@@ -934,10 +955,11 @@ static struct phy_driver realtek_drvs[] = {
.read_status = rtlgen_read_status,
.config_intr = &rtl8211f_config_intr,
.handle_interrupt = rtl8211f_handle_interrupt,
- .suspend = genphy_suspend,
+ .suspend = rtl821x_suspend,
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
}, {
PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID),
.name = "RTL8211F-VD Gigabit Ethernet",
@@ -946,10 +968,11 @@ static struct phy_driver realtek_drvs[] = {
.read_status = rtlgen_read_status,
.config_intr = &rtl8211f_config_intr,
.handle_interrupt = rtl8211f_handle_interrupt,
- .suspend = genphy_suspend,
+ .suspend = rtl821x_suspend,
.resume = rtl821x_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .flags = PHY_ALWAYS_CALL_SUSPEND,
}, {
.name = "Generic FE-GE Realtek PHY",
.match_phy_device = rtlgen_match_phy_device,
--
2.39.3
