Add the initial device tree support for the Reference Design Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries the support for Console UART, eMMC, I2C and GPIO based buttons. Most of the features of RDP474 is similar to RDP441, except that the QDSP will not be used in RDP474, whereas it will be used in the RDP441. RDP474 comes with the SoC IPQ5300, so add the SoC info support for the same. Kathiravan T (4): dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom: document MI01.9 board based on IPQ5332 family arm64: dts: qcom: ipq5332: add support for the RDP474 variant .../devicetree/bindings/arm/qcom.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++ drivers/soc/qcom/socinfo.c | 1 + include/dt-bindings/arm/qcom,ids.h | 1 + 5 files changed, 117 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts -- 2.17.1
