Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++++-----
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 28 ++++---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 113 ++++++++++++-------------
arch/arm64/boot/dts/qcom/msm8998.dtsi | 98 +++++++++++-----------
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 126 ++++++++++++++--------------
arch/arm64/boot/dts/qcom/qcs404.dtsi | 152 +++++++++++++++++-----------------
arch/arm64/boot/dts/qcom/sdm630.dtsi | 132 +++++++++++++++--------------
arch/arm64/boot/dts/qcom/sm6115.dtsi | 128 ++++++++++++++--------------
arch/arm64/boot/dts/qcom/sm6125.dtsi | 140 ++++++++++++++++---------------
arch/arm64/boot/dts/qcom/sm6375.dtsi | 126 ++++++++++++++--------------
10 files changed, 564 insertions(+), 527 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 7355f266742a..fff4a4014bd8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -146,6 +146,32 @@ psci: psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq6018";
+ qcom,glink-channels = "rpm_requests";
+
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq6018_s2: s2 {
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1062500>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -182,28 +208,6 @@ q6_region: memory@4ab00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq6018";
- qcom,glink-channels = "rpm_requests";
-
- regulators {
- compatible = "qcom,rpm-mp5496-regulators";
-
- ipq6018_s2: s2 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <1062500>;
- regulator-always-on;
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10bbdae..3222568ac4cf 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -151,6 +151,22 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-ipq9574";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -169,18 +185,6 @@ smem@4aa00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-ipq9574";
- qcom,glink-channels = "rpm_requests";
- };
- };
-
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f75932cc2a30..50ede09d6368 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -398,6 +398,63 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8996";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp1: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp2: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp3: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp4: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp5: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp6: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -472,62 +529,6 @@ mdata_mem: mpss-metadata {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8996-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp1: opp1 {
- opp-level = <1>;
- };
-
- rpmpd_opp2: opp2 {
- opp-level = <2>;
- };
-
- rpmpd_opp3: opp3 {
- opp-level = <3>;
- };
-
- rpmpd_opp4: opp4 {
- opp-level = <4>;
- };
-
- rpmpd_opp5: opp5 {
- opp-level = <5>;
- };
-
- rpmpd_opp6: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f0e943ff0046..bc51fa6a18aa 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -321,68 +321,72 @@ psci {
method = "smc";
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
+ rpm: remoteproc-rpm {
+ compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8998";
- qcom,glink-channels = "rpm_requests";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
- #clock-cells = <1>;
- };
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
- rpmpd: power-controller {
- compatible = "qcom,msm8998-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
+ rpmpd: power-controller {
+ compatible = "qcom,msm8998-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
- rpmpd_opp_turbo_plus: opp10 {
- opp-level = <RPM_SMD_LEVEL_BINNING>;
+ rpmpd_opp_turbo_plus: opp10 {
+ opp-level = <RPM_SMD_LEVEL_BINNING>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index b29bc4e4b837..ad1b721d1e1e 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -137,6 +137,71 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-qcm2290";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,qcm2290-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_min_svs: opp1 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp5 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp7 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -227,67 +292,6 @@ rmtfs_mem: memory@89b01000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcm2290";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,qcm2290-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_min_svs: opp1 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp5 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp7 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 972f753847e1..329363cace5a 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -166,6 +166,84 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-qcs404";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,qcs404-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <16>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <32>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <48>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <64>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <128>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <192>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <256>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <320>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <384>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <416>;
+ };
+
+ rpmpd_opp_turbo_plus: opp11 {
+ opp-level = <512>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -217,80 +295,6 @@ uefi_mem: memory@9f800000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-qcs404";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
- #clock-cells = <1>;
- clocks = <&xo_board>;
- clock-names = "xo";
- };
-
- rpmpd: power-controller {
- compatible = "qcom,qcs404-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <16>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <32>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <48>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <64>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <128>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <192>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <256>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <320>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <384>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <416>;
- };
-
- rpmpd_opp_turbo_plus: opp11 {
- opp-level = <512>;
- };
- };
- };
- };
- };
-
smem {
compatible = "qcom,smem";
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 897f2440c9c8..2dfaec074c24 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -359,6 +359,74 @@ psci {
method = "smc";
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sdm660";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sdm660-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -440,70 +508,6 @@ zap_shader_region: gpu@fed00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sdm660";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sdm660-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
- };
- };
- };
- };
-
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 55118577bf92..d3ea67f7563d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -341,6 +341,72 @@ CLUSTER_1_PD: power-domain-cpu-cluster1 {
};
};
+ rpm: remoteproc-rpm {
+ compatible = "qcom,sm6115-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6115";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6115-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_min_svs: opp1 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp5 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp7 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -440,68 +506,6 @@ rmtfs_mem: memory@89b01000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6115";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
- clocks = <&xo_board>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6115-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_min_svs: opp1 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp5 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp7 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index a596baa6ce3e..1d05ddf35e35 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -181,6 +181,78 @@ psci {
method = "smc";
};
+ remoteproc-rpm {
+ compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6125";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6125-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -292,74 +364,6 @@ qseecom_ta_mem: memory@13fc00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6125";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6125-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp10 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
- };
- };
- };
- };
- };
-
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index f8d9c34d3b2f..9834c5089fe8 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -493,67 +493,71 @@ cmdline_region: cmdline@ffd00000 {
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP
- IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sm6375";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
- clocks = <&xo_board_clk>;
- clock-names = "xo";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sm6375-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_min_svs: opp2 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp6 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp8 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
-
- rpmpd_opp_turbo_no_cpr: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ remoteproc-rpm {
+ compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sm6375";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+ clocks = <&xo_board_clk>;
+ clock-names = "xo";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sm6375-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_min_svs: opp2 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp6 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp8 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+ };
};
};
};
--
2.40.1
