[PATCH 12/21] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



-Support SoCs with different core frequency outputs for different PLL IDs
by adding a separate parameter for handling the same in the PLL driver
-Align sam9x60 and sama7g5 Soc PMC driver to PLL driver by adding core
output freq range in the PLL characteristics configurations

Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
---
 drivers/clk/at91/clk-sam9x60-pll.c | 12 ++++++------
 drivers/clk/at91/pmc.h             |  1 +
 drivers/clk/at91/sam9x60.c         |  7 +++++++
 drivers/clk/at91/sama7g5.c         |  7 +++++++
 4 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 0882ed01d5c2..b3012641214c 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -23,9 +23,6 @@
 #define UPLL_DIV		2
 #define PLL_MUL_MAX		(FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
 
-#define FCORE_MIN		(600000000)
-#define FCORE_MAX		(1200000000)
-
 #define PLL_MAX_ID		7
 
 struct sam9x60_pll_core {
@@ -194,7 +191,8 @@ static long sam9x60_frac_pll_compute_mul_frac(struct sam9x60_pll_core *core,
 	unsigned long nmul = 0;
 	unsigned long nfrac = 0;
 
-	if (rate < FCORE_MIN || rate > FCORE_MAX)
+	if (rate < core->characteristics->core_output[0].min ||
+	    rate > core->characteristics->core_output[0].max)
 		return -ERANGE;
 
 	/*
@@ -214,7 +212,8 @@ static long sam9x60_frac_pll_compute_mul_frac(struct sam9x60_pll_core *core,
 	}
 
 	/* Check if resulted rate is a valid.  */
-	if (tmprate < FCORE_MIN || tmprate > FCORE_MAX)
+	if (tmprate < core->characteristics->core_output[0].min ||
+	    tmprate > core->characteristics->core_output[0].max)
 		return -ERANGE;
 
 	if (update) {
@@ -666,7 +665,8 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
 			goto free;
 		}
 
-		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core, FCORE_MIN,
+		ret = sam9x60_frac_pll_compute_mul_frac(&frac->core,
+							characteristics->core_output[0].min,
 							parent_rate, true);
 		if (ret < 0) {
 			hw = ERR_PTR(ret);
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 1b3ca7dd9b57..3e36dcc464c1 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -75,6 +75,7 @@ struct clk_pll_characteristics {
 	struct clk_range input;
 	int num_output;
 	const struct clk_range *output;
+	const struct clk_range *core_output;
 	u16 *icpll;
 	u8 *out;
 	u8 upll : 1;
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index ac070db58195..452ad45cf251 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -26,10 +26,16 @@ static const struct clk_range plla_outputs[] = {
 	{ .min = 2343750, .max = 1200000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 static const struct clk_pll_characteristics plla_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(plla_outputs),
 	.output = plla_outputs,
+	.core_output = core_outputs,
 };
 
 static const struct clk_range upll_outputs[] = {
@@ -40,6 +46,7 @@ static const struct clk_pll_characteristics upll_characteristics = {
 	.input = { .min = 12000000, .max = 48000000 },
 	.num_output = ARRAY_SIZE(upll_outputs),
 	.output = upll_outputs,
+	.core_output = core_outputs,
 	.upll = true,
 };
 
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index f135b662f1ff..468a3c5449b5 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -104,11 +104,17 @@ static const struct clk_range pll_outputs[] = {
 	{ .min = 2343750, .max = 1200000000 },
 };
 
+/* Fractional PLL core output range. */
+static const struct clk_range core_outputs[] = {
+	{ .min = 600000000, .max = 1200000000 },
+};
+
 /* CPU PLL characteristics. */
 static const struct clk_pll_characteristics cpu_pll_characteristics = {
 	.input = { .min = 12000000, .max = 50000000 },
 	.num_output = ARRAY_SIZE(cpu_pll_outputs),
 	.output = cpu_pll_outputs,
+	.core_output = core_outputs,
 };
 
 /* PLL characteristics. */
@@ -116,6 +122,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
 	.input = { .min = 12000000, .max = 50000000 },
 	.num_output = ARRAY_SIZE(pll_outputs),
 	.output = pll_outputs,
+	.core_output = core_outputs,
 };
 
 /*
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux