On 01.06.23 17:26, Nishanth Menon wrote:
> When referring to array of phandles, using <> to separate the array
> entries is better notation as it makes potential errors with phandle and
> cell arguments easier to catch. Fix the outliers to be consistent with
> the rest of the usage.
>
> Cc: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> ---
> .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 17 ++++++++---------
> .../dts/ti/k3-am6548-iot2050-advanced-m2.dts | 18 ++++++++----------
> 2 files changed, 16 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 6b052a0ecfa1..bbbb5c169ccc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -384,13 +384,12 @@ &main_gpio0 {
>
> &wkup_gpio0 {
> pinctrl-names = "default";
> - pinctrl-0 = <
> - &arduino_io_d2_to_d3_pins_default
> - &arduino_i2c_aio_switch_pins_default
> - &arduino_io_oe_pins_default
> - &push_button_pins_default
> - &db9_com_mode_pins_default
> - >;
> + pinctrl-0 =
> + <&arduino_io_d2_to_d3_pins_default>,
> + <&arduino_i2c_aio_switch_pins_default>,
> + <&arduino_io_oe_pins_default>,
> + <&push_button_pins_default>,
> + <&db9_com_mode_pins_default>;
> gpio-line-names =
> /* 0..9 */
> "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
> @@ -711,11 +710,11 @@ mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
> &mcu_r5fss0_core0 {
> memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> <&mcu_r5fss0_core0_memory_region>;
> - mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
> + mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
> };
>
> &mcu_r5fss0_core1 {
> memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
> <&mcu_r5fss0_core1_memory_region>;
> - mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
> + mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
> };
> diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> index d5e41bdc89c3..1fc93e0b3c9b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
> @@ -66,20 +66,18 @@ AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7) /* (C23) GPIO1_89 */
>
> &main_gpio0 {
> pinctrl-names = "default";
> - pinctrl-0 = <
> - &main_m2_pcie_mux_control
> - &arduino_io_d4_to_d9_pins_default
> - >;
> + pinctrl-0 =
> + <&main_m2_pcie_mux_control>,
> + <&arduino_io_d4_to_d9_pins_default>;
> };
>
> &main_gpio1 {
> pinctrl-names = "default";
> - pinctrl-0 = <
> - &main_m2_enable_pins_default
> - &main_pmx0_m2_config_pins_default
> - &main_pmx1_m2_config_pins_default
> - &cp2102n_reset_pin_default
> - >;
> + pinctrl-0 =
> + <&main_m2_enable_pins_default>,
> + <&main_pmx0_m2_config_pins_default>,
> + <&main_pmx1_m2_config_pins_default>,
> + <&cp2102n_reset_pin_default>;
> };
>
> /*
Reviewed-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Jan
--
Siemens AG, Technology
Competence Center Embedded Linux
