The audio clocks should be intitialized to the correct rate by the subsystem
using them. There is no need to always initialize them from the CCM node
assigned-clocks property. This way boards using the audio clocks in a non-
standard way can change them without first duplicating the CCM clock
setup.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 428c60462e3d..995445ad54cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -534,26 +534,16 @@ clk: clock-controller@30380000 {
<&clk IMX8MP_CLK_A53_CORE>,
<&clk IMX8MP_CLK_NOC>,
<&clk IMX8MP_CLK_NOC_IO>,
- <&clk IMX8MP_CLK_GIC>,
- <&clk IMX8MP_CLK_AUDIO_AHB>,
- <&clk IMX8MP_CLK_AUDIO_AXI_SRC>,
- <&clk IMX8MP_AUDIO_PLL1>,
- <&clk IMX8MP_AUDIO_PLL2>;
+ <&clk IMX8MP_CLK_GIC>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
<&clk IMX8MP_ARM_PLL_OUT>,
<&clk IMX8MP_SYS_PLL2_1000M>,
<&clk IMX8MP_SYS_PLL1_800M>,
- <&clk IMX8MP_SYS_PLL2_500M>,
- <&clk IMX8MP_SYS_PLL1_800M>,
- <&clk IMX8MP_SYS_PLL1_800M>;
+ <&clk IMX8MP_SYS_PLL2_500M>;
assigned-clock-rates = <0>, <0>,
<1000000000>,
<800000000>,
- <500000000>,
- <400000000>,
- <800000000>,
- <393216000>,
- <361267200>;
+ <500000000>;
};
src: reset-controller@30390000 {
--
2.39.2
