Re: [PATCH v2 2/3] dt-bindings: display: simple: support non-default data-mapping

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Johannes,

Thank you for the patch.

On Tue, May 23, 2023 at 10:19:42AM +0200, Johannes Zink wrote:
> Some Displays support more than just a single default lvds data mapping,

s/lvds/LVDS/

> which can be used to run displays on only 3 LVDS lanes in the jeida-18
> data-mapping mode.
> 
> Add an optional data-mapping property to allow overriding the default
> data mapping. As it does not generally apply to any display and bus: use

s/bus:/bus,/

> it selectively on the innolux,g101ice-l01, which supports changing the
> data mapping via a strapping pin.
> 
> Signed-off-by: Johannes Zink <j.zink@xxxxxxxxxxxxxx>
> ---
> 
> Changes:
> 
> v1 -> v2: - worked in Rob's review findings (thanks for reviewing my
>             work): use extracted common property instead of duplicating
> 	    the property
> 	  - refined commit message
> 	  - add an example dts for automated checking
> ---
>  .../bindings/display/panel/panel-simple.yaml       | 26 +++++++++++++++++++++-
>  1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index ec50dd268314..698301c8c920 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -21,9 +21,9 @@ description: |
>  
>  allOf:
>    - $ref: panel-common.yaml#
> +  - $ref: ../lvds-data-mapping.yaml#
>  
>  properties:
> -
>    compatible:
>      enum:
>      # compatible must be listed in alphabetical order, ordered by compatible.
> @@ -353,6 +353,17 @@ properties:
>    power-supply: true
>    no-hpd: true
>    hpd-gpios: true
> +  data-mapping: true

As the property is optional, don't you need a default value ?

> +
> +if:
> +  not:
> +    properties:
> +      compatible:
> +        contains:
> +          const: innolux,g101ice-l01
> +then:
> +  properties:
> +    data-mapping: false
>  
>  additionalProperties: false
>  
> @@ -372,3 +383,16 @@ examples:
>          };
>        };
>      };
> +  - |
> +    panel_lvds: panel-lvds {
> +      compatible = "innolux,g101ice-l01";
> +      power-supply = <&vcc_lcd_reg>;
> +
> +      data-mapping = "jeida-24";
> +
> +      port {
> +        panel_in_lvds: endpoint {
> +          remote-endpoint = <&ltdc_out_lvds>;
> +        };
> +      };
> +    };
> 

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux