On 6/2/2023 4:45 PM, Suzuki K Poulose wrote:
On 02/06/2023 09:21, Tao Zhang wrote:
On 6/1/2023 8:14 PM, Suzuki K Poulose wrote:
On 27/04/2023 10:00, Tao Zhang wrote:
Add the nodes to set value for DSB edge control and DSB edge
control mask. Each DSB subunit TPDM has maximum of n(n<16) EDCR
resgisters to configure edge control. DSB edge detection control
00: Rising edge detection
01: Falling edge detection
10: Rising and falling edge detection (toggle detection)
And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to
configure mask. Eight 32 bit registers providing DSB interface
edge detection mask control.
Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
---
.../ABI/testing/sysfs-bus-coresight-devices-tpdm | 32 +++++
drivers/hwtracing/coresight/coresight-tpdm.c | 135
++++++++++++++++++++-
drivers/hwtracing/coresight/coresight-tpdm.h | 21 ++++
3 files changed, 187 insertions(+), 1 deletion(-)
diff --git
a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
index 348e167..a57f000 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -60,3 +60,35 @@ Description:
Bit[3] : Set to 0 for low performance mode.
Set to 1 for high performance mode.
Bit[4:8] : Select byte lane for high performance mode.
+
+What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl
+Date: March 2023
+KernelVersion 6.3
+Contact: Jinlong Mao (QUIC) <quic_jinlmao@xxxxxxxxxxx>, Tao
Zhang (QUIC) <quic_taozha@xxxxxxxxxxx>
+Description:
+ Read/Write a set of the edge control registers of the DSB
+ in TPDM.
+
+ Expected format is the following:
+ <integer1> <integer2> <integer3>
+
+ Where:
+ <integer1> : Start EDCR register number
+ <integer2> : End EDCR register number
+ <integer3> : The value need to be written
+
+What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl_mask
+Date: March 2023
+KernelVersion 6.3
+Contact: Jinlong Mao (QUIC) <quic_jinlmao@xxxxxxxxxxx>, Tao
Zhang (QUIC) <quic_taozha@xxxxxxxxxxx>
+Description:
+ Read/Write a set of the edge control mask registers of the
+ DSB in TPDM.
+
+ Expected format is the following:
+ <integer1> <integer2> <integer3>
+
+ Where:
+ <integer1> : Start EDCMR register number
+ <integer2> : End EDCMR register number
+ <integer3> : The value need to be written
diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c
b/drivers/hwtracing/coresight/coresight-tpdm.c
index 1bacaa5..a40e458 100644
--- a/drivers/hwtracing/coresight/coresight-tpdm.c
+++ b/drivers/hwtracing/coresight/coresight-tpdm.c
@@ -80,7 +80,14 @@ static void set_trigger_type(struct tpdm_drvdata
*drvdata, u32 *val)
static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata)
{
- u32 val;
+ u32 val, i;
+
+ for (i = 0; i < TPDM_DSB_MAX_EDCR; i++)
+ writel_relaxed(drvdata->dsb->edge_ctrl[i],
+ drvdata->base + TPDM_DSB_EDCR(i));
+ for (i = 0; i < TPDM_DSB_MAX_EDCMR; i++)
+ writel_relaxed(drvdata->dsb->edge_ctrl_mask[i],
+ drvdata->base + TPDM_DSB_EDCMR(i));
Do all TPDM DSBs have MAX_EDCR registers ? Or some have less than
that ?
If it is latter, do we need special care to avoid writing to inexistent
registers ?
You are right, not all DSB TPDMs have MAX_EDCR registers. In our
design, the inexistent register addresses
are not occupied and safe for accessing.
Currently we don't have a good way to know the quantity of EDCR/EDCMR
registers for DSB TPDMs.
The only way we can think of is to set it in device tree manually.
Do you have other suggestion for this?
val = readl_relaxed(drvdata->base + TPDM_DSB_TIER);
/* Set trigger timestamp */
@@ -313,6 +320,130 @@ static ssize_t dsb_mode_store(struct device
*dev,
}
static DEVICE_ATTR_RW(dsb_mode);
+static ssize_t dsb_edge_ctrl_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ ssize_t size = 0;
+ int i;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = 0; i < TPDM_DSB_MAX_EDCR; i++) {
+ size += sysfs_emit_at(buf, size,
+ "Index:0x%x Val:0x%x\n", i,
+ drvdata->dsb->edge_ctrl[i]);
It may be safe, but please add a check to make sure that we don't
overflow. At least bail out when we hit a return of 0, indicating
reached the end of buffer.
Can I add the following check to replace the current code??
int ret = 0;
for (i = 0; i < TPDM_DSB_MAX_EDCR; i++) {
ret = sysfs_emit_at(buf, size, "Index:0x%x Val:0x%x\n", i,
drvdata->dsb->edge_ctrl[i]);
if (!ret) {
dev_warn(drvdata->dev, "The buffer has been overflowed\n");
You don't need this, it already triggers a WARN() in sysfs_emit_at().
So you could do:
for (....) {
unsigned long bytes = sysfs_emit_at(buf, size, ....);
if (bytes <= 0)
break;
size += bytes;
}
Sure, I will update in the next patch series.
spin_unlock(&drvdata->spinlock);
return size;
} else
size += ret;
}
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+
+/*
+ * value 1: Start EDCR register number
+ * value 2: End EDCR register number
+ * value 3: The value need to be written
+ * The EDCR registers can include up to 16 32-bit registers, and each
+ * one can be configured to control up to 16 edge detections(2 bits
+ * control one edge detection). So a total 256 edge detections can be
+ * configured. So the starting number(value 1) and ending
number(value 2)
+ * cannot be greater than 256, and value 1 should be less than
value 2.
+ * The following values are the rage of value 3.
+ * 0 - Rising edge detection
+ * 1 - Falling edge detection
+ * 2 - Rising and falling edge detection (toggle detection)
+ */
+static ssize_t dsb_edge_ctrl_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ unsigned long val, mask, start, end, edge_ctrl, edge_ctrl_shift;
+ int i, reg;
+
+ if (sscanf(buf, "%lx %lx %lx", &start, &end, &edge_ctrl) != 3)
+ return -EINVAL;
+ if ((start >= TPDM_DSB_MAX_LINES) || (end >=
TPDM_DSB_MAX_LINES) ||
+ (start > end) || (edge_ctrl > 0x2))
+ return -EPERM;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = start; i <= end; i++) {
+ /*
+ * There are 2 bit per DSB Edge Control line.
+ * Thus we have 16 lines in a 32bit word.
+ */
+ reg = EDCR_TO_WORD_IDX(i);
+ mask = EDCR_TO_WORD_MASK(i);
+ val = drvdata->dsb->edge_ctrl[reg];
+ edge_ctrl_shift = EDCR_TO_WORD_VAL(edge_ctrl, i);
+ bitmap_replace(&val, &val, &edge_ctrl_shift, &mask, 32);
Could we simply do :
reg &= ~mask;
reg |= FIELD_PREP(mask, edge_ctrl);
Perhaps "FIELD_PREP" cannot be used here since "mask" must be
constant in this macro.
Ah, you are right. Sorry about that.
But in our code, the variable "mask" is not constant.
Still I think using the bitmap_replace is an overkill. We could simply
do:
val &= ~mask;
val |= EDCR_TO_WORD_VAL(edge_ctrl, i);
Sure, I will update in the next patch series.
Best,
Tao
Suzuki
+ drvdata->dsb->edge_ctrl[reg] = val;
+ }
+ spin_unlock(&drvdata->spinlock);
+
+ return size;
+}
+static DEVICE_ATTR_RW(dsb_edge_ctrl);
+
+static ssize_t dsb_edge_ctrl_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ ssize_t size = 0;
+ int i;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = 0; i < TPDM_DSB_MAX_EDCMR; i++) {
+ size += sysfs_emit_at(buf, size,
+ "Index:0x%x Val:0x%x\n", i,
+ drvdata->dsb->edge_ctrl_mask[i]);
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+
+/*
+ * value 1: Start EDCMR register number
+ * value 2: End EDCMR register number
+ * value 3: The value need to be written
+ */
+static ssize_t dsb_edge_ctrl_mask_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ unsigned long start, end, val;
+ u32 set;
+ int i, reg;
+
+ if (sscanf(buf, "%lx %lx %lx", &start, &end, &val) != 3)
+ return -EINVAL;
+ if ((start >= TPDM_DSB_MAX_LINES) || (end >= TPDM_DSB_MAX_LINES)
+ || (start > end) || (val & ~1UL))
+ return -EPERM;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = start; i <= end; i++) {
+ /*
+ * There is 1 bit per DSB Edge Control Mark line.
+ * Thus we have 32 lines in a 32bit word.
+ */
+ reg = EDCMR_TO_WORD_IDX(i);
+ set = drvdata->dsb->edge_ctrl_mask[reg];
+ if (val)
+ set |= BIT(EDCR_TO_WORD_SHIFT(i));
+ else
+ set &= ~BIT(EDCR_TO_WORD_SHIFT(i));
+ drvdata->dsb->edge_ctrl_mask[reg] = set;
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+static DEVICE_ATTR_RW(dsb_edge_ctrl_mask);
+
static ssize_t dsb_trig_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -385,6 +516,8 @@ static DEVICE_ATTR_RW(dsb_trig_ts);
static struct attribute *tpdm_dsb_attrs[] = {
&dev_attr_dsb_mode.attr,
+ &dev_attr_dsb_edge_ctrl.attr,
+ &dev_attr_dsb_edge_ctrl_mask.attr,
&dev_attr_dsb_trig_ts.attr,
&dev_attr_dsb_trig_type.attr,
NULL,
diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h
b/drivers/hwtracing/coresight/coresight-tpdm.h
index 79df07e..f25dcdec 100644
--- a/drivers/hwtracing/coresight/coresight-tpdm.h
+++ b/drivers/hwtracing/coresight/coresight-tpdm.h
@@ -12,6 +12,8 @@
/* DSB Subunit Registers */
#define TPDM_DSB_CR (0x780)
#define TPDM_DSB_TIER (0x784)
+#define TPDM_DSB_EDCR(n) (0x808 + (n * 4))
+#define TPDM_DSB_EDCMR(n) (0x848 + (n * 4))
/* Enable bit for DSB subunit */
#define TPDM_DSB_CR_ENA BIT(0)
@@ -34,6 +36,15 @@
#define TPDM_DSB_TEST_MODE GENMASK(10, 9)
#define TPDM_DSB_HPSEL GENMASK(6, 2)
+#define EDCRS_PER_WORD 16
+#define EDCR_TO_WORD_IDX(r) ((r) / EDCRS_PER_WORD)
+#define EDCR_TO_WORD_SHIFT(r) ((r % EDCRS_PER_WORD) * 2)
+#define EDCR_TO_WORD_VAL(val, r) (val << EDCR_TO_WORD_SHIFT(r))
+#define EDCR_TO_WORD_MASK(r) EDCR_TO_WORD_VAL(0x3, r)
minor nit: add a new line here please
Sure, I will update this in the next patch series.
+#define EDCMRS_PER_WORD 32
+#define EDCMR_TO_WORD_IDX(r) ((r) / EDCMRS_PER_WORD)
+#define EDCMR_TO_WORD_SHIFT(r) ((r) % EDCMRS_PER_WORD)
+
/* TPDM integration test registers */
#define TPDM_ITATBCNTRL (0xEF0)
#define TPDM_ITCNTRL (0xF00)
@@ -60,14 +71,24 @@
#define TPDM_PIDR0_DS_IMPDEF BIT(0)
#define TPDM_PIDR0_DS_DSB BIT(1)
+#define TPDM_DSB_MAX_LINES 256
+/* MAX number of EDCR registers */
+#define TPDM_DSB_MAX_EDCR 16
+/* MAX number of EDCMR registers */
+#define TPDM_DSB_MAX_EDCMR 8
+
/**
* struct dsb_dataset - specifics associated to dsb dataset
* @mode: DSB programming mode
+ * @edge_ctrl: Save value for edge control
+ * @edge_ctrl_mask: Save value for edge control mask
* @trig_ts: Enable/Disable trigger timestamp.
* @trig_type: Enable/Disable trigger type.
*/
struct dsb_dataset {
u32 mode;
+ u32 edge_ctrl[TPDM_DSB_MAX_EDCR];
+ u32 edge_ctrl_mask[TPDM_DSB_MAX_EDCMR];
minor nit: Please align it with the fields below.
Sure, I will update this in the next patch series.
Best,
Tao
bool trig_ts;
bool trig_type;
};
Suzuki
