Re: [PATCH] ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alain

On 6/1/23 08:52, Alain Volmat wrote:
Correct the following warnings by adding the required supplies (AVDD, DVDD)
for the ov5640 node.

arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'AVDD-supply' is a required property
 From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera@3c: 'DVDD-supply' is a required property
 From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml

Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
---
  arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++
  1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index ba8e9d9a42fa..f27d6dcb6651 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -185,7 +185,9 @@ ov5640: camera@3c {
  		reg = <0x3c>;
  		clocks = <&clk_ext_camera>;
  		clock-names = "xclk";
+		AVDD-supply = <&v2v8>;
  		DOVDD-supply = <&v2v8>;
+		DVDD-supply = <&v2v8>;
  		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
  		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
  		rotation = <180>;

Applied on stm32-next.

Thanks.
Alex



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux