Re: [PATCH v2 1/6] arm64: dts: qcom: sm8150: Use 2 interconnect cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.06.2023 08:20, Abel Vesa wrote:
> Use two interconnect cells in order to optionally support a path tag.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> 
> Changes since v1:
>  * This patch was not part of v1
> 
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 60 ++++++++++++++--------------
>  1 file changed, 30 insertions(+), 30 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 197c016aaeba..50a21062ea24 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -55,8 +55,8 @@ CPU0: cpu@0 {
>  			next-level-cache = <&L2_0>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			operating-points-v2 = <&cpu0_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD0>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -84,8 +84,8 @@ CPU1: cpu@100 {
>  			next-level-cache = <&L2_100>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			operating-points-v2 = <&cpu0_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD1>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -108,8 +108,8 @@ CPU2: cpu@200 {
>  			next-level-cache = <&L2_200>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			operating-points-v2 = <&cpu0_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD2>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -132,8 +132,8 @@ CPU3: cpu@300 {
>  			next-level-cache = <&L2_300>;
>  			qcom,freq-domain = <&cpufreq_hw 0>;
>  			operating-points-v2 = <&cpu0_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD3>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -156,8 +156,8 @@ CPU4: cpu@400 {
>  			next-level-cache = <&L2_400>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
>  			operating-points-v2 = <&cpu4_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD4>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -180,8 +180,8 @@ CPU5: cpu@500 {
>  			next-level-cache = <&L2_500>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
>  			operating-points-v2 = <&cpu4_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD5>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -204,8 +204,8 @@ CPU6: cpu@600 {
>  			next-level-cache = <&L2_600>;
>  			qcom,freq-domain = <&cpufreq_hw 1>;
>  			operating-points-v2 = <&cpu4_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD6>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -228,8 +228,8 @@ CPU7: cpu@700 {
>  			next-level-cache = <&L2_700>;
>  			qcom,freq-domain = <&cpufreq_hw 2>;
>  			operating-points-v2 = <&cpu7_opp_table>;
> -			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> -					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
> +			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&osm_l3 MASTER_OSM_L3_APPS 0 &osm_l3 SLAVE_OSM_L3 0>;
>  			power-domains = <&CPU_PD7>;
>  			power-domain-names = "psci";
>  			#cooling-cells = <2>;
> @@ -1760,49 +1760,49 @@ spi15: spi@c94000 {
>  		config_noc: interconnect@1500000 {
>  			compatible = "qcom,sm8150-config-noc";
>  			reg = <0 0x01500000 0 0x7400>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		system_noc: interconnect@1620000 {
>  			compatible = "qcom,sm8150-system-noc";
>  			reg = <0 0x01620000 0 0x19400>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		mc_virt: interconnect@163a000 {
>  			compatible = "qcom,sm8150-mc-virt";
>  			reg = <0 0x0163a000 0 0x1000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		aggre1_noc: interconnect@16e0000 {
>  			compatible = "qcom,sm8150-aggre1-noc";
>  			reg = <0 0x016e0000 0 0xd080>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		aggre2_noc: interconnect@1700000 {
>  			compatible = "qcom,sm8150-aggre2-noc";
>  			reg = <0 0x01700000 0 0x20000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		compute_noc: interconnect@1720000 {
>  			compatible = "qcom,sm8150-compute-noc";
>  			reg = <0 0x01720000 0 0x7000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		mmss_noc: interconnect@1740000 {
>  			compatible = "qcom,sm8150-mmss-noc";
>  			reg = <0 0x01740000 0 0x1c100>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> @@ -2120,7 +2120,7 @@ crypto: crypto@1dfa000 {
>  				 <&apps_smmu 0x506 0x0011>,
>  				 <&apps_smmu 0x508 0x0011>,
>  				 <&apps_smmu 0x512 0x0000>;
> -			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>;
> +			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
>  			interconnect-names = "memory";
>  		};
>  
> @@ -3547,14 +3547,14 @@ opp-202000000 {
>  		dc_noc: interconnect@9160000 {
>  			compatible = "qcom,sm8150-dc-noc";
>  			reg = <0 0x09160000 0 0x3200>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
>  		gem_noc: interconnect@9680000 {
>  			compatible = "qcom,sm8150-gem-noc";
>  			reg = <0 0x09680000 0 0x3e200>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> @@ -3659,7 +3659,7 @@ usb_2_dwc3: usb@a800000 {
>  		camnoc_virt: interconnect@ac00000 {
>  			compatible = "qcom,sm8150-camnoc-virt";
>  			reg = <0 0x0ac00000 0 0x1000>;
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  			qcom,bcm-voters = <&apps_bcm_voter>;
>  		};
>  
> @@ -3668,8 +3668,8 @@ mdss: display-subsystem@ae00000 {
>  			reg = <0 0x0ae00000 0 0x1000>;
>  			reg-names = "mdss";
>  
> -			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> -					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> +			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
> +					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
>  			interconnect-names = "mdp0-mem", "mdp1-mem";
>  
>  			power-domains = <&dispcc MDSS_GDSC>;
> @@ -4334,7 +4334,7 @@ osm_l3: interconnect@18321000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
>  			clock-names = "xo", "alternate";
>  
> -			#interconnect-cells = <1>;
> +			#interconnect-cells = <2>;
>  		};
>  
>  		cpufreq_hw: cpufreq@18323000 {



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux