Andew, since we are touching this section, do you want to match with @Tony Lindgren rename changes here in omap... https://www.spinics.net/lists/linux-omap/msg166406.html Regards, On Thu, Jun 1, 2023 at 1:56 PM Andrew Davis <afd@xxxxxx> wrote: > > The main_uart0 may not always be the console, but it will always be > the UART0 in MAIN domain. Name the pinmux node to match. This makes > it consistent with all other TI SoC based boards. > > Signed-off-by: Andrew Davis <afd@xxxxxx> > --- > arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > index cb46c38ce2cc1..29c51705c2f17 100644 > --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > @@ -397,7 +397,7 @@ AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */ > >; > }; > > - console_pins_default: console-pins-default { > + main_uart0_pins_default: main-uart0-pins-default { > pinctrl-single,pins = < > AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ > AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ > @@ -736,7 +736,7 @@ wlcore: wlcore@2 { > > &main_uart0 { > pinctrl-names = "default"; > - pinctrl-0 = <&console_pins_default>; > + pinctrl-0 = <&main_uart0_pins_default>; > status = "okay"; > }; > > -- > 2.39.2 > -- Robert Nelson https://rcn-ee.com/
