[PATCH 2/2] arm64: dts: qcom: sm8550: add display port nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the Display Port controller subnode to the MDSS node.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 89 +++++++++++++++++++++++++++++++++++-
 1 file changed, 87 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 75cd374943eb..73524afc2e3a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2495,6 +2495,13 @@ dpu_intf2_out: endpoint {
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -2522,6 +2529,84 @@ opp-514000000 {
 				};
 			};
 
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8550_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -2705,8 +2790,8 @@ dispcc: clock-controller@af00000 {
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <0>, /* dp0 */
-				 <0>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
 				 <0>,
 				 <0>, /* dp2 */

-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux