Re: [PATCH v8 3/3] dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/06/2023 01:49, Chris Packham wrote:
> From: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
> 
> Switch the DT binding to a YAML schema to enable the DT validation.
> 
> The text binding didn't mention it as a requirement but existing usage
> has
> 
>    compatible = "marvell,armada-8k-nand-controller",
>                 "marvell,armada370-nand-controller";
> 
> so the YAML allows this in addition to the individual compatible values.
> 
> There was also an incorrect reference to dma-names being "rxtx" where
> the driver and existing device trees actually use dma-names = "data" so
> this is corrected in the conversion.
> 
> Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v8:
>     - Mark deprecated compatible values as such
>     - Allow "marvell,armada-8k-nand-controller" without
>       "marvell,armada370-nand-controller"
>     - Make dma-names usage reflect reality
>     - Update commit message
>     
>     Changes in v7:
>     - Restore "label" and "partitions" properties (should be picked up via
>       nand-controller.yaml but aren't)

What do you mean by "aren't"? They are not needed.

>     - Add/restore nand-on-flash-bbt and nand-ecc-mode which aren't covered
>       by nand-controller.yaml.
>     - Use "unevalautedProperties: false"
>     - Corrections for clock-names, dma-names, nand-rb and nand-ecc-strength
>     - Add pxa3xx-nand-controller example
>     
>     Changes in v6:
>     - remove properties covered by nand-controller.yaml
>     - add example using armada-8k compatible
>     
>     earlier changes:
>     
>     v5:
>        1) Get back "label" and "partitions" properties but without
>           ref to the "partition.yaml" which was wrongly used.
>     
>        2) Add "additionalProperties: false" for nand@ because all possible
>           properties are described.
>     
>     v4:
>        1) Remove "label" and "partitions" properties
>     
>        2) Use 2 clocks for A7K/8K platform which is a requirement
>     
>     v3:
>       1) Remove txt version from the MAINTAINERS list
>     
>       2) Use enum for some of compatible strings
>     
>       3) Drop:
>             #address-cells
>             #size-cells:
>     
>          as they are inherited from the nand-controller.yaml
>     
>       4) Add restriction to use 2 clocks for A8K SoC
>     
>       5) Dropped description for clock-names and extend it with
>          minItems: 1
>     
>       6) Drop description for "dmas"
>     
>       7) Use "unevalautedProperties: false"
>     
>       8) Drop quites from yaml refs.
>     
>       9) Use 4-space indentation for the example section
>     
>     v2:
>       1) Fixed warning by yamllint with incorrect indentation for compatible list
> 
>  .../bindings/mtd/marvell,nand-controller.yaml | 223 ++++++++++++++++++
>  .../devicetree/bindings/mtd/marvell-nand.txt  | 126 ----------
>  MAINTAINERS                                   |   1 -
>  3 files changed, 223 insertions(+), 127 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mtd/marvell-nand.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> new file mode 100644
> index 000000000000..433feb430555
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
> @@ -0,0 +1,223 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/marvell,nand-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell NAND Flash Controller (NFC)
> +
> +maintainers:
> +  - Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: marvell,armada-8k-nand-controller
> +          - const: marvell,armada370-nand-controller
> +      - enum:
> +          - marvell,armada-8k-nand-controller
> +          - marvell,armada370-nand-controller
> +          - marvell,pxa3xx-nand-controller
> +      - description: legacy bindings
> +        deprecated: true
> +        enum:
> +          - marvell,armada-8k-nand
> +          - marvell,armada370-nand
> +          - marvell,pxa3xx-nand
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    description:
> +      Shall reference the NAND controller clocks, the second one is
> +      is only needed for the Armada 7K/8K SoCs
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: core
> +      - const: reg
> +
> +  dmas:
> +    maxItems: 1
> +
> +  dma-names:
> +    items:
> +      - const: data
> +
> +  marvell,system-controller:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Syscon node that handles NAND controller related registers
> +
> +patternProperties:
> +  "^nand@[0-3]$":
> +    type: object
> +    unevaluatedProperties: false
> +    properties:
> +      reg:
> +        minimum: 0
> +        maximum: 3
> +
> +      nand-rb:
> +        minItems: 1

Drop minItems.

> +        maxItems: 1

Didn't you have here minimum and maximum? I think I did not ask to
remove them.

> +
> +      nand-ecc-step-size:
> +        const: 512
> +
> +      nand-ecc-strength:
> +        enum: [1, 4, 8, 12, 16]
> +
> +      nand-on-flash-bbt:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +
> +      nand-ecc-mode:
> +        const: hw
> +
> +      label:
> +        $ref: /schemas/types.yaml#/definitions/string

Drop label

> +
> +      partitions:
> +        type: object

Drop partitions.

> +
> +      marvell,nand-keep-config:
> +        description: |
> +          Orders the driver not to take the timings from the core and
> +          leaving them completely untouched. Bootloader timings will then
> +          be used.
> +        $ref: /schemas/types.yaml#/definitions/flag
> +
> +      marvell,nand-enable-arbiter:
> +        description: |
> +          To enable the arbiter, all boards blindly used it,
> +          this bit was set by the bootloader for many boards and even if
> +          it is marked reserved in several datasheets, it might be needed to set
> +          it (otherwise it is harmless).
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        deprecated: true
> +
> +    additionalProperties: false

unevaluatedProperties: false

> +
> +    required:
> +      - reg
> +      - nand-rb
> +

required: block goes here

> +allOf:
> +  - $ref: nand-controller.yaml
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: marvell,pxa3xx-nand-controller
> +    then:
> +      required:
> +        - dmas
> +        - dma-names
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: marvell,armada-8k-nand-controller
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +
> +        clock-names:
> +          minItems: 2
> +
> +      required:
> +        - marvell,system-controller
> +


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux