Re: [PATCH v8 00/18] GMU-less A6xx support (A610, A619_holi)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 29.05.2023 15:52, Konrad Dybcio wrote:
> v7 -> v8:
> - Fix up resume/suspend (icc now correctly parks to 0, don't abuse
>   OPP & genpd throughout system-wide suspend)
> - Don't handle ebi1_clk separately, the bulk ops handle it just fine
> - Rebase on next-20230525 (no meaningful changes)
Krzysztof pointed out to me in private that he has previously
reviewed the dt-bindings patches, but I managed to drop them by
accident.. I'll fix that in the next revision. I'll wait for more
comments before resending though.

Konrad

> 
> v7: https://lore.kernel.org/linux-arm-msm/20230223-topic-gmuwrapper-v7-0-ecc7aab83556@xxxxxxxxxx/
> 
> v6 -> v7:
> - Rebase on next-20230519 (A640/650 speedbin merged already)
> 
> - separate out the .get_timestamp cb for gmu wrapper
> 
> - check for gmu presence inside a6xx_llc_slices_(init|destroy) instead
>   of before calling them
> 
> - use REG_A6XX_RBBM_GPR0_CNTL instead of literal 0x18
> 
> - move a6xx_bus_clear_pending_transactions to a6xx_gpu, clean it up
>   and reuse it for gmu wrapper gpus
> 
> - drop clearing RBBM_GBIF (GBIF from GX's POV) as part of draining the
>   buses, it's not necessary
> 
> - introduce a helper for gpu softreset
> 
> - sw-reset the gmu wrapper GPUS *after* draining GBIF and only reset
>   it if it's hung
> 
> - reword the commit message in "Remove both GBIF and RBBM GBIF halt
>   on hw init" and move it before gmu wrapper-specific changes
> 
> - drop set_rate logic from a6xx_pm_suspend as the clock simply gets
>   disabled and we don't have to worry about scaling problems as OPP
>   and devfreq take care of that, validated with debugcc
> 
> - drop a level of indentation in _a6xx_check_idle() to hopefully
>   improve readability
> 
> - check for !a610 instead of gmu_wrapper||a619_holi in sptprac cc
>   toggling in a6xx_set_hwcg()
> 
> - pick up krzk's rb on bindings
> 
> All external dependencies have been merged since the last revision.
> 
> v6: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v6-0-2034115bb60c@xxxxxxxxxx
> 
> v5 -> v6:
> - Rebase on 8ead96783163 ("drm/msm/gpu: Move BO allocation out of hw_init")
>   (Add .ucode_load to funcs_gmuwrapper)
> - Drop A6[45]0 speedbin deps, merged into msm-next
> 
> Dependencies:
> - https://lore.kernel.org/linux-arm-msm/20230330231517.2747024-1-konrad.dybcio@xxxxxxxxxx/ (to work properly)
> 
> v5: https://lore.kernel.org/linux-arm-msm/20230223-topic-gmuwrapper-v5-0-bf774b9a902a@xxxxxxxxxx/
> 
> v4 -> v5:
> - Add a newline before the new allOf:if: [3/15]
> - Enforce 6 clocks on A619_holi/A610 [2/15]
> - Pick up tags
> - Improve error handling in a6xx_pm_resume [6/15]
> - Add patch [1/15] (fix an existing issue) which can be picked
>   separately and account for it in [6/15]
> - Rebase atop Akhil's CX shutdown patches and incorporate analogous logic
> - Fix a regression introduced in v3 that made the fw loader expect
>   GMU fw on GMU wrapper GPUs
> 
> Dependencies:
> - https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@xxxxxxxxxx/ (to apply)
> - https://lore.kernel.org/linux-arm-msm/20230330231517.2747024-1-konrad.dybcio@xxxxxxxxxx/ (to work properly)
> 
> v4: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v4-0-e987eb79d03f@xxxxxxxxxx
> 
> v3 -> v4:
> - Drop the mistakengly-included and wrong A3xx-A5xx bindings changes
> - Improve bindings commit messages to better explain what GMU Wrapper is
> - Drop the A680 highest bank bit value adjustment patch
> - Sort UBWC config variables in a reverse-Christmass-tree fashion [4/14]
> - Don't alter any UBWC config values in [4/14]
>   - Do so for a619_holi in [8/14]
> - Rebase on next-20230314 (shouldn't matter at all)
> 
> v3: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v3-0-5be55a336819@xxxxxxxxxx
> 
> v2 -> v3:
> New dependencies:
> - https://lore.kernel.org/linux-arm-msm/20230223-topic-opp-v3-0-5f22163cd1df@xxxxxxxxxx/T/#t
> - https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@xxxxxxxxxx/
> 
> Sidenote: A speedbin rework is in progress, the of_machine_is_compatible
> calls in A619_holi are ugly (but well, necessary..) but they'll be
> replaced with socid matching in this or the next kernel cycle.
> 
> Due to the new way of identifying GMU wrapper GPUs, configuring 6350
> to use wrapper would cause the wrong fuse values to be checked, but that
> will be solved by the conversion + the ultimate goal is to use the GMU
> whenever possible with the wrapper left for GMU-less Adrenos and early
> bringup debugging of GMU-equipped ones.
> 
> - Ship dt-bindings in this series as we're referencing the compatible now
> 
> - "De-staticize" -> "remove static keyword" [3/15]
> 
> - Track down all the values in [4/15]
> 
> - Add many comments and explanations in [4/15]
> 
> - Fix possible return-before-mutex-unlock [5/15]
> 
> - Explain the GMU wrapper a bit more in the commit msg [5/15]
> 
> - Separate out pm_resume/suspend for GMU-wrapper GPUs to make things
>   cleaner [5/15]
> 
> - Don't check if `info` exists, it has to at this point [5/15]
> 
> - Assign gpu->info early and clean up following if statements in
>   a6xx_gpu_init [5/15]
> 
> - Determine whether we use GMU wrapper based on the GMU compatible
>   instead of a quirk [5/15]
> 
> - Use a struct field to annotate whether we're using gmu wrapper so
>   that it can be assigned at runtime (turns out a619 holi-ness cannot
>   be determined by patchid + that will make it easier to test out GMU
>   GPUs without actually turning on the GMU if anybody wants to do so)
>   [5/15]
> 
> - Unconditionally hook up gx to the gmu wrapper (otherwise our gpu
>   will not get power) [5/15]
> 
> - Don't check for gx domain presence in gmu_wrapper paths, it's
>   guaranteed [5/15]
> 
> - Use opp set rate in the gmuwrapper suspend path [5/15]
> 
> - Call opp functions on the GPU device and not on the DRM device of
>   mdp4/5/DPU1 half the time (WHOOOOPS!) [5/15]
> 
> - Disable the memory clock in a6xx_pm_suspend instead of enabling it
>   (moderate oops) [5/15]
> 
> - Call the forgotten clk_bulk_disable_unprepare in a6xx_pm_suspend [5/15]
> 
> - Set rate to FMIN (a6xx really doesn't like rate=0 + that's what
>   msm-5.x does anyway) before disabling core clock [5/15]
> 
> - pm_runtime_get_sync -> pm_runtime_resume_and_get [5/15]
> 
> - Don't annotate no cached BO support with a quirk, as A619_holi is
>   merged into the A619 entry in the big const struct - this means
>   that all GPUs operating in gmu wrapper configuration will be
>   implicitly treated as if they didn't have this feature [7/15]
> 
> - Drop OPP rate & icc related patches, they're a part of a separate
>   series now; rebase on it
> 
> - Clean up extra parentheses [8/15]
> 
> - Identify A619_holi by checking the compatible of its GMU instead
>   of patchlevel [8/15]
> 
> - Drop "Fix up A6XX protected registers" - unnecessary, Rob will add
>   a comment explaining why
> 
> - Fix existing UBWC values for A680, new patch [10/15]
> 
> - Use adreno_is_aXYZ macros in speedbin matching [13/15] - new patch
> 
> v2: https://lore.kernel.org/linux-arm-msm/20230214173145.2482651-1-konrad.dybcio@xxxxxxxxxx/
> 
> v1 -> v2:
> - Fix A630 values in [2/14]
> - Fix [6/14] for GMU-equipped GPUs
> 
> Link to v1: https://lore.kernel.org/linux-arm-msm/20230126151618.225127-1-konrad.dybcio@xxxxxxxxxx/
> 
> This series concludes my couple-weeks-long suffering of figuring out
> the ins and outs of the "non-standard" A6xx GPUs which feature no GMU.
> 
> The GMU functionality is essentially emulated by parting out a
> "GMU wrapper" region, which is essentially just a register space
> within the GPU. It's modeled to be as similar to the actual GMU
> as possible while staying as unnecessary as we can make it - there's
> no IRQs, communicating with a microcontroller, no RPMh communication
> etc. etc. I tried to reuse as much code as possible without making
> a mess where every even line is used for GMU and every odd line is
> used for GMU wrapper..
> 
> This series contains:
> - plumbing for non-GMU operation, if-ing out GMU calls based on
>   GMU presence
> - GMU wrapper support
> - A610 support (w/ speedbin)
> - A619 support (w/ speedbin)
> - couple of minor fixes and improvements
> - VDDCX/VDDGX scaling fix for non-GMU GPUs (concerns more than just
>   A6xx)
> - Enablement of opp interconnect properties
> 
> A619_holi works perfectly fine using the already-present A619 support
> in mesa. A610 needs more work on that front, but can already replay
> command traces captures on downstream.
> 
> NOTE: the "drm/msm/a6xx: Add support for A619_holi" patch contains
> two occurences of 0x18 used in place of a register #define, as it's
> supposed to be RBBM_GPR0_CNTL, but that will only be present after
> mesa-side changes are merged and headers are synced from there.
> 
> Speedbin patches depend on:
> https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@xxxxxxxxxx/
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> Konrad Dybcio (18):
>       dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx
>       dt-bindings: display/msm/gmu: Add GMU wrapper
>       drm/msm/a6xx: Remove static keyword from sptprac en/disable functions
>       drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
>       drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
>       drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
>       drm/msm/a6xx: Add a helper for software-resetting the GPU
>       drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
>       drm/msm/a6xx: Extend and explain UBWC config
>       drm/msm/a6xx: Introduce GMU wrapper support
>       drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
>       drm/msm/a6xx: Add support for A619_holi
>       drm/msm/a6xx: Add A610 support
>       drm/msm/a6xx: Fix some A619 tunables
>       drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
>       drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
>       drm/msm/a6xx: Add A619_holi speedbin support
>       drm/msm/a6xx: Add A610 speedbin support
> 
>  .../devicetree/bindings/display/msm/gmu.yaml       |  50 +-
>  .../devicetree/bindings/display/msm/gpu.yaml       |  61 ++-
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c              | 122 +++--
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.h              |   2 +
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c              | 512 ++++++++++++++++++---
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.h              |   4 +
>  drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c        |  14 +-
>  drivers/gpu/drm/msm/adreno/adreno_device.c         |  17 +-
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c            |   8 +-
>  drivers/gpu/drm/msm/adreno/adreno_gpu.h            |  33 +-
>  10 files changed, 686 insertions(+), 137 deletions(-)
> ---
> base-commit: 6a3d37b4d885129561e1cef361216f00472f7d2e
> change-id: 20230223-topic-gmuwrapper-b4fff5fd7789
> 
> Best regards,



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux