Re: [PATCH 1/2] dt-bindings: thermal: mediatek: Move auxdac binding to yaml

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 30/05/2023 17:04, matthias.bgg@xxxxxxxxxx wrote:
> From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> 
> Convert the older binding to yaml syntax.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> ---
> 
>  .../bindings/thermal/mediatek,thermal.yaml    | 168 ++++++++++++++++++
>  .../bindings/thermal/mediatek-thermal.txt     |  52 ------
>  2 files changed, 168 insertions(+), 52 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
>  delete mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
> 
> diff --git a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
> new file mode 100644
> index 000000000000..7aa2bdc43567
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
> @@ -0,0 +1,168 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Thermal Sensor
> +
> +maintainers:
> +  - Matthias Brugger <matthias.bgg@xxxxxxxxx>
> +
> +description: |
> +  The MediaTek thermal controller measures the on-SoC temperatures.
> +  This device does not have its own ADC, instead it directly controls
> +  the AUXADC via AHB bus accesses. For this reason this device needs
> +  phandles to the AUXADC. Also it controls a mux in the apmixedsys
> +  register space via AHB bus accesses, so a phandle to the APMIXEDSYS
> +  is also needed.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - mediatek,mt2701-thermal
> +          - mediatek,mt2712-thermal
> +          - mediatek,mt7622-thermal
> +          - mediatek,mt7986-thermal
> +          - mediatek,mt8173-thermal
> +          - mediatek,mt8183-thermal
> +          - mediatek,mt8365-thermal
> +      - items:
> +          - const: mediatek,mt7981-thermal
> +          - const: mediatek,mt7986-thermal
> +      - items:
> +          - const: mediatek,mt8516-thermal
> +          - const: mediatek,mt2701-thermal
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2

maxItems instead

> +
> +  clock-names:
> +    items:
> +      - const: therm
> +      - const: auxadc
> +
> +  resets:
> +    maxItems: 1
> +    description: Reference to the reset controller controlling the thermal controller.

You can drop description, it's obvious.

> +
> +  reset-names:
> +    items:
> +      - const: therm
> +
> +  nvmem-cells:
> +    items:
> +      - description: Calibration eFuse data. If unspecified default values are used.
> +
> +  nvmem-cell-names:
> +    items:
> +      - const: calibration-data
> +
> +  mediatek,auxadc:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      A phandle to the AUXADC which the thermal controller uses.
> +
> +  mediatek,apmixedsys:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      A phandle to the APMIXEDSYS controller.
> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +
> +  bank0-supply:
> +    description: Regulator node supplying voltage to the first bank
> +
> +  bank1-supply:
> +    description: Regulator node supplying voltage to the second bank

These were not present before. Mention this in commit msg. Also drop "node".

> +
> +

Just one blank line.

> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - mediatek,auxadc
> +  - mediatek,apmixedsys
> +  - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    #include <dt-bindings/reset/mt8173-resets.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      auxadc: auxadc@11001000 {
> +        compatible = "mediatek,mt8173-auxadc";
> +        reg = <0 0x11001000 0 0x1000>;
> +        clocks = <&pericfg CLK_PERI_AUXADC>;
> +        clock-names = "main";
> +        #io-channel-cells = <1>;
> +      };
> +
> +      apmixedsys: clock-controller@10209000 {
> +        compatible = "mediatek,mt8173-apmixedsys";
> +        reg = <0 0x10209000 0 0x1000>;
> +        #clock-cells = <1>;
> +      };

Drop both examples, not really relevant to thermal. It grows the example
with code already documented somewhere else.

> +
> +      thermal: thermal@1100b000 {
> +        #thermal-sensor-cells = <1>;
> +        compatible = "mediatek,mt8173-thermal";
> +        reg = <0 0x1100b000 0 0x1000>;
> +        interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
> +        clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
> +        clock-names = "therm", "auxadc";
> +        resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> +        reset-names = "therm";
> +        mediatek,auxadc = <&auxadc>;
> +        mediatek,apmixedsys = <&apmixedsys>;
> +        nvmem-cells = <&thermal_calibration_data>;
> +        nvmem-cell-names = "calibration-data";
> +      };
> +
> +      thermal-zones {
> +        cpu_thermal: cpu-thermal {
> +          polling-delay-passive = <1000>;
> +          polling-delay = <1000>;
> +
> +          thermal-sensors = <&thermal 0>;
> +          sustainable-power = <1500>;
> +
> +          trips {
> +            threshold: trip-point0 {
> +              temperature = <68000>;
> +              hysteresis = <2000>;
> +              type = "passive";
> +            };
> +
> +            target: trip-point1 {
> +              temperature = <85000>;
> +              hysteresis = <2000>;
> +              type = "passive";
> +            };
> +
> +            cpu_crit: cpu_crit0 {

No underscores in node names.


Best regards,
Krzysztof