[PATCH 14/14] ARM: dts: qcom: msm8974: rename labels for DSI nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently in board files MDSS and HDMI nodes stay apart, because labels
for HDMI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node aliases from dsi_* to mdss_dsi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 24 ++++++-------
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 16 ++++-----
 arch/arm/boot/dts/qcom-msm8974.dtsi           | 36 +++++++++----------
 .../boot/dts/qcom-msm8974pro-samsung-klte.dts | 24 ++++++-------
 4 files changed, 50 insertions(+), 50 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 72f7e09a5bbf..72f6611bbe49 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -48,7 +48,15 @@ eeprom: eeprom@52 {
 	};
 };
 
-&dsi0 {
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	vdda-supply = <&pm8941_l2>;
 	vdd-supply = <&pm8941_l22>;
 	vddio-supply = <&pm8941_l12>;
@@ -65,31 +73,23 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pm8941_l12>;
 };
 
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
 &pm8941_wled {
 	qcom,cs-out;
 	qcom,switching-freq = <3200>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 205907c8670a..60bdfddeae69 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -230,7 +230,11 @@ bluetooth {
 	};
 };
 
-&dsi0 {
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&pm8941_l2>;
@@ -246,27 +250,23 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pm8941_l12>;
 };
 
-&mdss {
-	status = "okay";
-};
-
 &pm8941_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 58e144957c5d..aeca504918a0 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1837,10 +1837,10 @@ mmcc: clock-controller@fd8c0000 {
 				 <&gcc GPLL0_VOTE>,
 				 <&gcc GPLL1_VOTE>,
 				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&dsi0_phy 1>,
-				 <&dsi0_phy 0>,
-				 <&dsi1_phy 1>,
-				 <&dsi1_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1905,20 +1905,20 @@ ports {
 					port@0 {
 						reg = <0>;
 						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
 						mdp5_intf2_out: endpoint {
-							remote-endpoint = <&dsi1_in>;
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
 			};
 
-			dsi0: dsi@fd922800 {
+			mdss_dsi0: dsi@fd922800 {
 				compatible = "qcom,msm8974-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922800 0x1f8>;
@@ -1928,7 +1928,7 @@ dsi0: dsi@fd922800 {
 				interrupts = <4>;
 
 				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -1945,7 +1945,7 @@ dsi0: dsi@fd922800 {
 					      "core",
 					      "core_mmss";
 
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				status = "disabled";
 
@@ -1958,20 +1958,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&mdp5_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi0_phy: phy@fd922a00 {
+			mdss_dsi0_phy: phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
@@ -1989,7 +1989,7 @@ dsi0_phy: phy@fd922a00 {
 				status = "disabled";
 			};
 
-			dsi1: dsi@fd922e00 {
+			mdss_dsi1: dsi@fd922e00 {
 				compatible = "qcom,msm8974-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922e00 0x1f8>;
@@ -1999,7 +1999,7 @@ dsi1: dsi@fd922e00 {
 				interrupts = <4>;
 
 				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_AHB_CLK>,
@@ -2016,7 +2016,7 @@ dsi1: dsi@fd922e00 {
 					      "core",
 					      "core_mmss";
 
-				phys = <&dsi1_phy>;
+				phys = <&mdss_dsi1_phy>;
 
 				status = "disabled";
 
@@ -2029,20 +2029,20 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
 							remote-endpoint = <&mdp5_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
-			dsi1_phy: phy@fd923000 {
+			mdss_dsi1_phy: phy@fd923000 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd923000 0xd4>,
 				      <0xfd923100 0x280>,
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index eb505d6d7f31..3e2c86591ee2 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -329,7 +329,15 @@ bluetooth {
 	};
 };
 
-&dsi0 {
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
 	status = "okay";
 
 	vdda-supply = <&pma8084_l2>;
@@ -351,31 +359,23 @@ panel: panel@0 {
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
+				remote-endpoint = <&mdss_dsi0_out>;
 			};
 		};
 	};
 };
 
-&dsi0_out {
+&mdss_dsi0_out {
 	remote-endpoint = <&panel_in>;
 	data-lanes = <0 1 2 3>;
 };
 
-&dsi0_phy {
+&mdss_dsi0_phy {
 	status = "okay";
 
 	vddio-supply = <&pma8084_l12>;
 };
 
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
 &pma8084_gpios {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio5";
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux