Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.
To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 40 ++++----
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 98 +++++++++----------
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 86 ++++++++--------
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 76 +++++++-------
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 76 +++++++-------
.../dts/qcom/sdm845-sony-xperia-tama.dtsi | 74 +++++++-------
.../qcom/sdm845-xiaomi-beryllium-common.dtsi | 66 ++++++-------
.../boot/dts/qcom/sdm845-xiaomi-polaris.dts | 76 +++++++-------
arch/arm64/boot/dts/qcom/sdm845.dtsi | 36 +++----
9 files changed, 314 insertions(+), 314 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index d05c511718df..1ce413263b7f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -636,25 +636,6 @@ src_pp600_s3c: smps3 {
};
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
edp_brij_i2c: &i2c3 {
status = "okay";
clock-frequency = <400000>;
@@ -687,7 +668,7 @@ ports {
port@0 {
reg = <0>;
sn65dsi86_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
@@ -767,6 +748,25 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
/*
* Cheza fw does not properly program the GPU aperture to allow the
* GPU to update the SMMU pagetables for context switches. Work
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 4dea2c04b22f..fd183f74c216 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -415,53 +415,6 @@ &cdsp_pas {
firmware-name = "qcom/sdm845/cdsp.mbn";
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vreg_l26a_1p2>;
-
- qcom,dual-dsi-mode;
- qcom,master-dsi;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_a>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vreg_l1a_0p875>;
-};
-
-&dsi1 {
- vdda-supply = <&vreg_l26a_1p2>;
-
- qcom,dual-dsi-mode;
-
- /* DSI1 is slave, so use DSI0 clocks */
- assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
-
- status = "okay";
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <<9611_b>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-};
-
-&dsi1_phy {
- vdds-supply = <&vreg_l1a_0p875>;
- status = "okay";
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -517,7 +470,7 @@ port@0 {
reg = <0>;
lt9611_a: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
@@ -525,7 +478,7 @@ port@1 {
reg = <1>;
lt9611_b: endpoint {
- remote-endpoint = <&dsi1_out>;
+ remote-endpoint = <&mdss_dsi1_out>;
};
};
@@ -556,6 +509,53 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l26a_1p2>;
+
+ qcom,dual-dsi-mode;
+ qcom,master-dsi;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_a>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mdss_dsi1 {
+ vdda-supply = <&vreg_l26a_1p2>;
+
+ qcom,dual-dsi-mode;
+
+ /* DSI1 is slave, so use DSI0 clocks */
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ status = "okay";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <<9611_b>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&mdss_dsi1_phy {
+ vdds-supply = <&vreg_l1a_0p875>;
+ status = "okay";
+};
+
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index d1440b790fa6..b2d4336e764b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -417,7 +417,43 @@ &cdsp_pas {
firmware-name = "qcom/sdm845/cdsp.mdt";
};
-&dsi0 {
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/a630_zap.mbn";
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
status = "okay";
vdda-supply = <&vdda_mipi_dsi0_1p2>;
@@ -448,33 +484,33 @@ ports {
port@0 {
reg = <0>;
truly_in_0: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
port@1 {
reg = <1>;
truly_in_1: endpoint {
- remote-endpoint = <&dsi1_out>;
+ remote-endpoint = <&mdss_dsi1_out>;
};
};
};
};
};
-&dsi0_phy {
+&mdss_dsi0_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi0_pll>;
};
-&dsi1 {
+&mdss_dsi1 {
status = "okay";
vdda-supply = <&vdda_mipi_dsi1_1p2>;
qcom,dual-dsi-mode;
/* DSI1 is slave, so use DSI0 clocks */
- assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
ports {
port@1 {
@@ -486,47 +522,11 @@ endpoint {
};
};
-&dsi1_phy {
+&mdss_dsi1_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi1_pll>;
};
-&gcc {
- protected-clocks = <GCC_QSPI_CORE_CLK>,
- <GCC_QSPI_CORE_CLK_SRC>,
- <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
- <GCC_LPASS_Q6_AXI_CLK>,
- <GCC_LPASS_SWAY_CLK>;
-};
-
-&gmu {
- status = "okay";
-};
-
-&gpu {
- status = "okay";
-
- zap-shader {
- memory-region = <&gpu_mem>;
- firmware-name = "qcom/sdm845/a630_zap.mbn";
- };
-};
-
-&i2c10 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-&ipa {
- qcom,gsi-loader = "self";
- memory-region = <&ipa_fw_mem>;
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 5c384345c05d..7b1555af97b8 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -336,44 +336,6 @@ &cdsp_pas {
firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- /*
- * Both devices use different panels but all other properties
- * are common. Compatible line is declared in device dts.
- */
- display_panel: panel@0 {
- status = "disabled";
-
- reg = <0>;
-
- vddio-supply = <&vreg_l14a_1p88>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -452,6 +414,44 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ /*
+ * Both devices use different panels but all other properties
+ * are common. Compatible line is declared in device dts.
+ */
+ display_panel: panel@0 {
+ status = "disabled";
+
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
/* Modem/wifi */
&mss_pil {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 1eaff964b202..91ae5e875d6d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -411,44 +411,6 @@ &cdsp_pas {
firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- panel@0 {
- compatible = "visionox,rm69299-shift";
- status = "okay";
- reg = <0>;
- vdda-supply = <&vreg_l14a_1p88>;
- vdd3p3-supply = <&vreg_l28a_3p0>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sde_dsi_active &sde_te_active>;
- pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
-
- port {
- panel_in_0: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in_0>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -505,6 +467,44 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ panel@0 {
+ compatible = "visionox,rm69299-shift";
+ status = "okay";
+ reg = <0>;
+ vdda-supply = <&vreg_l14a_1p88>;
+ vdd3p3-supply = <&vreg_l28a_3p0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+ pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+
+ port {
+ panel_in_0: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in_0>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 420ffede3e80..3bc187a066ae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -368,43 +368,6 @@ &cdsp_pas {
status = "okay";
};
-&dsi0 {
- vdda-supply = <&vreg_l26a_1p2>;
- status = "okay";
-
- panel: panel@0 {
- /* The compatible is assigned in device DTs. */
- reg = <0>;
-
- backlight = <&pmi8998_wled>;
- vddio-supply = <&vreg_l14a_1p8>;
- vsp-supply = <&lab>;
- vsn-supply = <&ibb>;
- panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-
- pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
- pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
- pinctrl-names = "default", "sleep";
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- vdds-supply = <&vreg_l1a_0p9>;
- status = "okay";
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -515,6 +478,43 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l26a_1p2>;
+ status = "okay";
+
+ panel: panel@0 {
+ /* The compatible is assigned in device DTs. */
+ reg = <0>;
+
+ backlight = <&pmi8998_wled>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ vsp-supply = <&lab>;
+ vsn-supply = <&ibb>;
+ panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+ pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1a_0p9>;
+ status = "okay";
+};
+
&pm8998_gpios {
focus_n: focus-n-state {
pins = "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 5ed975cc6ecb..8bac4b153cc9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -223,39 +223,6 @@ &cdsp_pas {
firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vreg_l26a_1p2>;
-
- display_panel: panel@0 {
- reg = <0>;
- vddio-supply = <&vreg_l14a_1p8>;
- vddpos-supply = <&lab>;
- vddneg-supply = <&ibb>;
-
- backlight = <&pmi8998_wled>;
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- status = "disabled";
-
- port {
- panel_in_0: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in_0>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vreg_l1a_0p875>;
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -298,6 +265,39 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vreg_l26a_1p2>;
+
+ display_panel: panel@0 {
+ reg = <0>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+
+ port {
+ panel_in_0: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in_0>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vreg_l1a_0p875>;
+};
+
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 576f0421824f..6db12abaa88d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -373,44 +373,6 @@ &cdsp_pas {
status = "okay";
};
-&dsi0 {
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
- status = "okay";
-
- display_panel: panel@0 {
- compatible = "jdi,fhd-nt35596s";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
- vddio-supply = <&vreg_l14a_1p8>;
- backlight = <&pmi8998_wled>;
- vddpos-supply = <&lab>;
- vddneg-supply = <&ibb>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sde_dsi_active>;
- pinctrl-1 = <&sde_dsi_suspend>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- vdds-supply = <&vdda_mipi_dsi0_pll>;
- status = "okay";
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -505,6 +467,44 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+ status = "okay";
+
+ display_panel: panel@0 {
+ compatible = "jdi,fhd-nt35596s";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ backlight = <&pmi8998_wled>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sde_dsi_active>;
+ pinctrl-1 = <&sde_dsi_suspend>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ status = "okay";
+};
+
&mss_pil {
firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 950305aad44d..29524c25b63d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4510,14 +4510,14 @@ dpu_intf0_out: endpoint {
port@1 {
reg = <1>;
dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
port@2 {
reg = <2>;
dpu_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
+ remote-endpoint = <&mdss_dsi1_in>;
};
};
};
@@ -4617,7 +4617,7 @@ opp-810000000 {
};
};
- dsi0: dsi@ae94000 {
+ mdss_dsi0: dsi@ae94000 {
compatible = "qcom,sdm845-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
@@ -4639,12 +4639,12 @@ dsi0: dsi@ae94000 {
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
- phys = <&dsi0_phy>;
+ phys = <&mdss_dsi0_phy>;
status = "disabled";
@@ -4657,20 +4657,20 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
+ mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi0_phy: phy@ae94400 {
+ mdss_dsi0_phy: phy@ae94400 {
compatible = "qcom,dsi-phy-10nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
@@ -4689,7 +4689,7 @@ dsi0_phy: phy@ae94400 {
status = "disabled";
};
- dsi1: dsi@ae96000 {
+ mdss_dsi1: dsi@ae96000 {
compatible = "qcom,sdm845-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0 0x0ae96000 0 0x400>;
@@ -4711,12 +4711,12 @@ dsi1: dsi@ae96000 {
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SDM845_CX>;
- phys = <&dsi1_phy>;
+ phys = <&mdss_dsi1_phy>;
status = "disabled";
@@ -4729,20 +4729,20 @@ ports {
port@0 {
reg = <0>;
- dsi1_in: endpoint {
+ mdss_dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
- dsi1_out: endpoint {
+ mdss_dsi1_out: endpoint {
};
};
};
};
- dsi1_phy: phy@ae96400 {
+ mdss_dsi1_phy: phy@ae96400 {
compatible = "qcom,dsi-phy-10nm";
reg = <0 0x0ae96400 0 0x200>,
<0 0x0ae96600 0 0x280>,
@@ -4904,10 +4904,10 @@ dispcc: clock-controller@af00000 {
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
- <&dsi0_phy 0>,
- <&dsi0_phy 1>,
- <&dsi1_phy 0>,
- <&dsi1_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
<&dp_phy 0>,
<&dp_phy 1>;
clock-names = "bi_tcxo",
--
2.39.2
