With the 3dge and ZG clocks now available, the generic GPU node can be added. Until proper firmware is made, it is not usable. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> --- This is based on the assumption that the Rogue 6250 could use generic driver [1] and firmware [2] being implemebted by the Mesa group and others. In practice, the firmware isn't really compatible since the 6250 in the RZ/G2M appears to be a different variant. [1] - https://gitlab.freedesktop.org/frankbinns/powervr/-/tree/powervr-next [2] - https://gitlab.freedesktop.org/frankbinns/linux-firmware/-/tree/powervr/powervr diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index c21b78685123..7e5816113a3c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -226,6 +226,27 @@ extalr_clk: extalr { clock-frequency = <0>; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <830000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <830000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <830000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <830000>; + }; + }; + /* External PCIe clock - can be overridden by the board */ pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; @@ -2347,6 +2368,18 @@ gic: interrupt-controller@f1010000 { resets = <&cpg 408>; }; + gpu@fd000000 { + compatible = "img,powervr-series6xt"; + reg = <0 0xfd000000 0 0x40000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 112>, <&cpg CPG_MOD 112>,<&cpg CPG_MOD 112>; + clock-names = "core", "mem", "sys"; + interrupt-names = "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&sysc R8A774A1_PD_3DG_B>; + resets = <&cpg 112>; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a774a1", "renesas,pcie-rcar-gen3"; -- 2.39.2
