Hi Thierry,
just a gentle ping for those 2 patches. It would be nice if you could
pick them up, so they can go into the next mergewindow.
Regards,
Lucas
Am Mittwoch, den 19.11.2014, 10:29 +0100 schrieb Lucas Stach:
> From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
>
> This patch adds support for the GiantPlus GPG48273QS5 4.3" WQVGA TFT LCD panel
> to the simple-panel driver.
>
> This panel is connected via a parallel bus and uses both HSYNC and VSYNC,
> whose lengths are unfortunately not clearly defined. The datasheet only
> specifies the front- and backporch length, but the timing diagram suggests
> that both sync signals should be asserted for exactly one clock cycle.
>
> Signed-off-by: Philipp Zabel <philipp.zabel@xxxxxxxxx>
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> [lst]: rebased on top of drm/panel/for-next + added commit message
> ---
> .../bindings/panel/giantplus,gpg482739qs5.txt | 7 ++++++
> drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++
> 2 files changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
>
> diff --git a/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
> new file mode 100644
> index 000000000000..24b0b624434b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt
> @@ -0,0 +1,7 @@
> +GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "giantplus,gpg48273qs5"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index c4b6167a8bf3..1d8ed2062841 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -560,6 +560,29 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = {
> },
> };
>
> +static const struct drm_display_mode giantplus_gpg482739qs5_mode = {
> + .clock = 9000,
> + .hdisplay = 480,
> + .hsync_start = 480 + 5,
> + .hsync_end = 480 + 5 + 1,
> + .htotal = 480 + 5 + 1 + 40,
> + .vdisplay = 272,
> + .vsync_start = 272 + 8,
> + .vsync_end = 272 + 8 + 1,
> + .vtotal = 272 + 8 + 1 + 8,
> + .vrefresh = 60,
> +};
> +
> +static const struct panel_desc giantplus_gpg482739qs5 = {
> + .modes = &giantplus_gpg482739qs5_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 95,
> + .height = 54,
> + },
> +};
> +
> static const struct drm_display_mode hannstar_hsd070pww1_mode = {
> .clock = 71100,
> .hdisplay = 1280,
> @@ -757,6 +780,9 @@ static const struct of_device_id platform_of_match[] = {
> .compatible = "foxlink,fl500wvr00-a0t",
> .data = &foxlink_fl500wvr00_a0t,
> }, {
> + .compatible = "giantplus,gpg482739qs5",
> + .data = &giantplus_gpg482739qs5
> + }, {
> .compatible = "hannstar,hsd070pww1",
> .data = &hannstar_hsd070pww1,
> }, {
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
