MSM8939 has the SDC pinctrl consolidated in two &sdcN_default and
&sdcN_sleep states, while MSM8916 has all pins separated. Make this
consistent by consolidating them for MSM8916 well.
Use this as a chance to define default pinctrl in the SoC.dtsi and only
let boards that add additional definitions (such as cd-gpios) override it.
For MSM8939 just make the label consistent with the other pinctrl
definitions (they do not have a _state suffix).
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 8 +--
arch/arm64/boot/dts/qcom/apq8039-t2.dts | 3 -
arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts | 8 +--
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 8 +--
arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 8 +--
arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts | 8 +--
arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 8 +--
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 9 ---
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 8 +--
arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 74 ++++++++++------------
.../dts/qcom/msm8916-samsung-a2015-common.dtsi | 8 +--
.../boot/dts/qcom/msm8916-samsung-gt5-common.dtsi | 8 +--
.../boot/dts/qcom/msm8916-samsung-j5-common.dtsi | 8 +--
.../boot/dts/qcom/msm8916-samsung-serranove.dts | 9 ---
arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi | 4 --
.../boot/dts/qcom/msm8916-wingtech-wt88047.dts | 9 ---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 ++
.../dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts | 7 +-
arch/arm64/boot/dts/qcom/msm8939.dtsi | 14 ++--
19 files changed, 72 insertions(+), 143 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index b8537fe576a8..23e3b86186ac 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -370,18 +370,14 @@ pm8916_l17: l17 {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index e783b0af355e..107795bf7e5c 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -253,9 +253,6 @@ pm8916_l18: l18 {
};
&sdhc_1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_default_state>;
- pinctrl-1 = <&sdc1_sleep_state>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 9846584daf64..5ad49fe999db 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -133,17 +133,13 @@ &pm8916_vib {
};
&sdhc_1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
-
status = "okay";
};
&sdhc_2 {
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 4ad7d36cf350..1c43f3d6a0b4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -171,18 +171,14 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 33ca4e157cd5..92f695481769 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -139,10 +139,6 @@ pm8916_l17: l17 {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
@@ -150,8 +146,8 @@ &sdhc_2 {
vmmc-supply = <®_sd_vmmc>;
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index 0d387d9507c3..f4dbc515c47a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -128,16 +128,12 @@ &pm8916_vib {
};
&sdhc_1 {
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- pinctrl-names = "default", "sleep";
-
status = "okay";
};
&sdhc_2 {
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 39be7b6b1695..abd409f10cfe 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -260,18 +260,14 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
/*
* The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>.
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 9560ba632c6f..97262b8519b3 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -242,19 +242,10 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
non-removable;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index 04e598a436cb..9757182fba3e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -125,18 +125,14 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index c2149bcf53c4..cbf0f3d311af 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -290,44 +290,41 @@ blsp_i2c6_sleep: blsp-i2c6-sleep-state {
bias-disable;
};
- pmx-sdc1-clk-state {
- sdc1_clk_on: clk-on-pins {
+ sdc1_default: sdc1-default-state {
+ clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
- sdc1_clk_off: clk-off-pins {
- pins = "sdc1_clk";
-
- bias-disable;
- drive-strength = <2>;
- };
- };
-
- pmx-sdc1-cmd-state {
- sdc1_cmd_on: cmd-on-pins {
+ cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
- sdc1_cmd_off: cmd-off-pins {
- pins = "sdc1_cmd";
+ data-pins {
+ pins = "sdc1_data";
bias-pull-up;
- drive-strength = <2>;
+ drive-strength = <10>;
};
};
- pmx-sdc1-data-state {
- sdc1_data_on: data-on-pins {
- pins = "sdc1_data";
+ sdc1_sleep: sdc1-sleep-state {
+ clk-pins {
+ pins = "sdc1_clk";
+
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd-pins {
+ pins = "sdc1_cmd";
bias-pull-up;
- drive-strength = <10>;
+ drive-strength = <2>;
};
- sdc1_data_off: data-off-pins {
+ data-pins {
pins = "sdc1_data";
bias-pull-up;
@@ -335,44 +332,41 @@ sdc1_data_off: data-off-pins {
};
};
- pmx-sdc2-clk-state {
- sdc2_clk_on: clk-on-pins {
+ sdc2_default: sdc2-default-state {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
- sdc2_clk_off: clk-off-pins {
- pins = "sdc2_clk";
-
- bias-disable;
- drive-strength = <2>;
- };
- };
-
- pmx-sdc2-cmd-state {
- sdc2_cmd_on: cmd-on-pins {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- sdc2_cmd_off: cmd-off-pins {
- pins = "sdc2_cmd";
+ data-pins {
+ pins = "sdc2_data";
bias-pull-up;
- drive-strength = <2>;
+ drive-strength = <10>;
};
};
- pmx-sdc2-data-state {
- sdc2_data_on: data-on-pins {
- pins = "sdc2_data";
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+
+ bias-disable;
+ drive-strength = <2>;
+ };
+ cmd-pins {
+ pins = "sdc2_cmd";
bias-pull-up;
- drive-strength = <10>;
+ drive-strength = <2>;
};
- sdc2_data_off: data-off-pins {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 3c145a0aac99..019bf73178fa 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -263,18 +263,14 @@ pm8916_l17: l17 {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index 057ce62c0305..7943bb619116 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -135,16 +135,12 @@ &pm8916_usbin {
};
&sdhc_1 {
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- pinctrl-names = "default", "sleep";
-
status = "okay";
};
&sdhc_2 {
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index 36233a31b98b..f4fd5d72b28b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -97,18 +97,14 @@ &pm8916_resin {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 3637e7d80d0a..15dc246e84e2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -276,19 +276,10 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
non-removable;
/*
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index dafa5bd82328..004a129a2ee2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -101,10 +101,6 @@ &pm8916_usbin {
};
&sdhc_1 {
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
- pinctrl-names = "default", "sleep";
-
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 733917531218..c94d36b38651 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -173,19 +173,10 @@ &pm8916_vib {
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
non-removable;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 9494b6512d87..c0aa6a53fbca 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1562,6 +1562,9 @@ sdhc_1: mmc@7824900 {
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
+ pinctrl-0 = <&sdc1_default>;
+ pinctrl-1 = <&sdc1_sleep>;
+ pinctrl-names = "default", "sleep";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
@@ -1580,6 +1583,9 @@ sdhc_2: mmc@7864900 {
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
bus-width = <4>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
index 80e4f0a6eea1..a9df8dab5481 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
@@ -158,15 +158,12 @@ pm8916_l18: l18 {
};
&sdhc_1 {
- pinctrl-0 = <&sdc1_default_state>;
- pinctrl-1 = <&sdc1_sleep_state>;
- pinctrl-names = "default", "sleep";
status = "okay";
};
&sdhc_2 {
- pinctrl-0 = <&sdc2_default_state &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_sleep_state &sdc2_cd_default>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 2cbd4baa9b95..1f79444bc250 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1080,7 +1080,7 @@ ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
};
};
- sdc1_default_state: sdc1-default-state {
+ sdc1_default: sdc1-default-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
@@ -1100,7 +1100,7 @@ data-pins {
};
};
- sdc1_sleep_state: sdc1-sleep-state {
+ sdc1_sleep: sdc1-sleep-state {
clk-pins {
pins = "sdc1_clk";
bias-disable;
@@ -1120,7 +1120,7 @@ data-pins {
};
};
- sdc2_default_state: sdc2-default-state {
+ sdc2_default: sdc2-default-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
@@ -1140,7 +1140,7 @@ data-pins {
};
};
- sdc2_sleep_state: sdc2-sleep-state {
+ sdc2_sleep: sdc2-sleep-state {
clk-pins {
pins = "sdc2_clk";
bias-disable;
@@ -1632,6 +1632,9 @@ sdhc_1: mmc@7824900 {
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC1_BCR>;
+ pinctrl-0 = <&sdc1_default>;
+ pinctrl-1 = <&sdc1_sleep>;
+ pinctrl-names = "default", "sleep";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
@@ -1651,6 +1654,9 @@ sdhc_2: mmc@7864900 {
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC2_BCR>;
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
bus-width = <4>;
status = "disabled";
};
--
2.40.1
