On Tue, 30 May 2023 01:31:28 +0300 andy.shevchenko@xxxxxxxxx wrote: > Mon, May 29, 2023 at 10:07:02AM -0400, Hugo Villeneuve kirjoitti: > > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> > > > > Hello, > > this patch series mainly fixes a GPIO regression and improve RS485 flags and > > properties detection from DT. > > > > It now also includes various small fixes and improvements that were previously > > sent as separate patches, but that made testing everything difficult. > > > > Patch 1 fixes an issue when debugging IOcontrol register. After testing the GPIO > > regression patches (patches 6 and 7, tests done by Lech Perczak), it appers that > > this patch is also necessary for having the correct IOcontrol register values. > > > > Patch 2 introduces a delay after a reset operation to respect datasheet > > timing recommandations. > > These two patches are w/o Fixes tag, they should be moved in the series further > as I explained before. Your explanation was not clear. Anyway, I moved them in position 7 and 8. > > Patch 3 fixes an issue with init of first port during probing. > > > > Patch 4 fixes a bug with the output value when first setting the GPIO direction. > > > > Patch 5 is a refactor of GPIO registration code. > > > > Patches 6 and 7 fix a GPIO regression by (re)allowing to choose GPIO function > > for GPIO pins shared with modem status lines. > > > > Patch 8 allows to read common rs485 device-tree flags and properties. > > > > Patch 9 improves comments about chip variants. > > > > I have tested the changes on a custom board with two SC16IS752 DUART using a > > Variscite IMX8MN NANO SOM. > > -- > With Best Regards, > Andy Shevchenko
