From: Balsam CHIHI <bchihi@xxxxxxxxxxxx> Update LVTS calibration data documentation for mt8192 and mt8195. Signed-off-by: Balsam CHIHI <bchihi@xxxxxxxxxxxx> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx> [bero@xxxxxxxxxxxx: Fix issues pointed out by Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>] Signed-off-by: Bernhard Rosenkränzer <bero@xxxxxxxxxxxx> --- drivers/thermal/mediatek/lvts_thermal.c | 31 +++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index d5e5214784ece..9185d02003633 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -531,7 +531,8 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, * The efuse blob values follows the sensor enumeration per thermal * controller. The decoding of the stream is as follow: * - * stream index map for MCU Domain : + * MT8195 : + * Stream index map for MCU Domain mt8195 : * * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 @@ -542,7 +543,7 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 * - * stream index map for AP Domain : + * Stream index map for AP Domain mt8195 : * * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1-----> * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A @@ -556,6 +557,32 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8-----> * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48 * + * MT8192 : + * Stream index map for MCU Domain mt8192 : + * + * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> + * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B + * + * <-----sensor#2-----> <-----sensor#3-----> + * 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13 + * + * <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> + * 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23 + * + * Stream index map for AP Domain mt8192 : + * + * <-----sensor#0-----> <-----sensor#1-----> + * 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B + * + * <-----sensor#2-----> <-----sensor#3-----> + * 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33 + * + * <-----sensor#4-----> <-----sensor#5-----> + * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B + * + * <-----sensor#6-----> <-----sensor#7-----> <-----sensor#8-----> + * 0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 + * * The data description gives the offset of the calibration data in * this bytes stream for each sensor. */ -- 2.41.0.rc2
