Awesome !!! Thank you Matthias Regards, Alexandre Le lun. 29 mai 2023 à 15:22, Matthias Brugger <matthias.bgg@xxxxxxxxx> a écrit : > > > > On 25/05/2023 10:33, Alexandre Mergnat wrote: > > This commits are based on the Fabien Parent <fparent@xxxxxxxxxxxx> work. > > > > The purpose of this series is to add the following HWs / IPs support for > > the mt8365-evk board: > > - Watchdog > > - Power Management Integrated Circuit "PMIC" wrapper > > - MT6357 PMIC > > - MultiMediaCard "MMC" & Secure Digital "SD" controller > > - USB controller > > - Ethernet MAC controller > > > > Add CPU Freq & IDLE support for this board. > > > > All previous dependancies are merged and released into the v6.4-rc1. > > > > === Build: > > > > To test this serie, cherry-pick this serie, and build it using the arm64 > > defconfig. > > > > Regards, > > Alex > > > > Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> > > --- > > Changes in v8: > > - Change vqmmc-supply of mmc1 node. > > - Remove all always-on regulators from the board devicetree. > > - Link to v7: https://lore.kernel.org/r/20230203-evk-board-support-v7-0-98cbdfac656e@xxxxxxxxxxxx > > > > Changes in v7: > > - Rebase to the kernel v6.4-rc1. > > - Remove "dt-bindings: watchdog: mediatek,mtk-wdt: add mt8365" because > > it was applied. > > - Link to v6: https://lore.kernel.org/r/20230203-evk-board-support-v6-0-8d6b1cfe7f29@xxxxxxxxxxxx > > > > Changes in v6: > > - Add commit message for the arm64 defconfig changes > > - Fix the mail list > > - Link to v5: https://lore.kernel.org/r/20230203-evk-board-support-v5-0-1883c1b405ad@xxxxxxxxxxxx > > > > Changes in v5: > > - Add patches to build the MT6357 regulator driver and MTK PMIC keys by default > > - Remove "dt-bindings: pinctrl: mediatek,mt8365-pinctrl: add drive strength property" > > patch from this serie and add it to the pinctrl serie [3] > > - Link to v4: https://lore.kernel.org/r/20230203-evk-board-support-v4-0-5cffe66a38c0@xxxxxxxxxxxx > > > > Changes in v4: > > - Remove v3 applied patch from the serie: > > - arm64: dts: mediatek: add ethernet support for mt8365 SoC > > - arm64: dts: mediatek: add mmc support for mt8365 SoC > > - arm64: dts: mediatek: add mt6357 device-tree > > - arm64: dts: mediatek: add pwrap support to mt8365 SoC > > - arm64: dts: mediatek: Increase the size BL31 reserved memory > > - Drop "arm64: dts: mediatek: fix systimer properties" which is done [1] > > - Fix style, typo and re-order properties. > > - Use interrupts-extended for the PMIC node. > > - Link to v3: https://lore.kernel.org/r/20230203-evk-board-support-v3-0-0003e80e0095@xxxxxxxxxxxx > > > > Changes in v3: > > - Remove v2 applied patch from the serie: > > - dt-bindings: mmc: mediatek,mtk-sd: add mt8365 > > - Add trailers and simply resend. > > - Link to v2: https://lore.kernel.org/r/20230203-evk-board-support-v2-0-6ec7cdb10ccf@xxxxxxxxxxxx > > > > --- > > Alexandre Mergnat (9): > > arm64: defconfig: enable MT6357 regulator > > arm64: defconfig: enable Mediatek PMIC key > > arm64: dts: mediatek: add watchdog support for mt8365 SoC > > arm64: dts: mediatek: add mt6357 PMIC support for mt8365-evk > > arm64: dts: mediatek: add mmc support for mt8365-evk > > arm64: dts: mediatek: add usb controller support for mt8365-evk > > arm64: dts: mediatek: add ethernet support for mt8365-evk > > arm64: dts: mediatek: add OPP support for mt8365 SoC > > arm64: dts: mediatek: add cpufreq support for mt8365-evk > > > > Amjad Ouled-Ameur (1): > > arm64: dts: mediatek: Add CPU Idle support > > > > arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 235 ++++++++++++++++++++++++++++ > > arch/arm64/boot/dts/mediatek/mt8365.dtsi | 142 +++++++++++++++++ > > arch/arm64/configs/defconfig | 2 + > > 3 files changed, 379 insertions(+) > > --- > > base-commit: d2b7e0f7ff8e0b21e4c8d0ae6dfa38786fe44b35 > > change-id: 20230203-evk-board-support-d5b7a839ed7b > > > > Best regards, > > Whole series applied, thanks!
