Hello, This series adds devicetree node for MAIN CPSW2G instance of CPSW Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI Expansion Board connected to the J7 Common-Processor-Board. NOTE: This series applies on top of the following series: https://lore.kernel.org/r/20230331090028.8373-1-r-gunasekaran@xxxxxx/ which in turn has been applied on linux-next tagged next-20230525. Regards, Siddharth. --- RFC series at: https://lore.kernel.org/r/20230426105718.118806-1-s-vadapalli@xxxxxx Changes since RFC series: - Add GESI board product link in the device-tree overlay file. Kishon Vijay Abraham I (2): arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI arch/arm64/boot/dts/ti/Makefile | 2 + .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso | 85 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 69 +++++++++++++++ 3 files changed, 156 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso -- 2.25.1
