Hi Tommaso, On Mon, May 29, 2023 at 09:41:23AM +0200, Tommaso Merciai wrote: > On Sun, May 28, 2023 at 09:16:05PM +0000, Sakari Ailus wrote: > > On Fri, May 26, 2023 at 07:39:43PM +0200, Tommaso Merciai wrote: > > > Add documentation of device tree in YAML schema for the ALVIUM > > > Camera from Allied Vision Inc. > > > > > > References: > > > - https://www.alliedvision.com/en/products/embedded-vision-solutions > > > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx> > > > --- > > > Changes since v1: > > > - Fixed build error as suggested by RHerring bot > > > > > > .../media/i2c/alliedvision,alvium.yaml | 115 ++++++++++++++++++ > > > 1 file changed, 115 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > > > new file mode 100644 > > > index 000000000000..81e9e560c99d > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml > > > @@ -0,0 +1,115 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Alliedvision Alvium Camera > > > + > > > +maintainers: > > > + - Tommaso Merciai <tomm.merciai@xxxxxxxxx> > > > + - Martin Hecht <martin.hecht@xxxxxxxx> > > > + > > > +allOf: > > > + - $ref: /schemas/media/video-interface-devices.yaml# > > > + > > > +properties: > > > + compatible: > > > + const: alliedvision,alvium > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + description: XCLK Input Clock > > > + > > > + clock-names: > > > + const: xclk > > > > I'd also drop this as you have a single clock only: it's redundant. > > Then you suggest also to drop devm_clk_get(dev, "xclk"); > into the driver code and use devm_clk_get(&pdev->dev, NULL); > right? Actually, I don't see any clock input pin in the 22-pins FPC connector. Are you sure the camera module needs an external clock ? > > > + > > > + powerdown-gpios: > > > + maxItems: 1 > > > + description: > > > > + Reference to the GPIO connected to the powerdown pin, if any. > > > + > > > + reset-gpios: > > > + maxItems: 1 > > > + description: > > > > + Reference to the GPIO connected to the reset pin, if any. > > > + > > > + streamon-delay: > > > + maxItems: 1 > > > + description: > > > > + Delay before camera start capturing frames in us. > > > + > > > + rotation: > > > + enum: > > > + - 0 > > > + - 180 > > > + > > > + port: > > > + description: Digital Output Port > > > + $ref: /schemas/graph.yaml#/$defs/port-base > > > + additionalProperties: false > > > + > > > + properties: > > > + endpoint: > > > + $ref: /schemas/media/video-interfaces.yaml# > > > + unevaluatedProperties: false > > > + > > > + properties: > > > + clock-lanes: > > > + const: 0 > > > > The driver can know this, no need to have it in DT, i.e. please drop it. > > Oks. > > > > > > + data-lanes: > > > + minItems: 1 > > > + maxItems: 4 > > > + link-frequencies: true > > > + > > > + required: > > > + - data-lanes > > > + - link-frequencies > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - clocks > > > + - clock-names > > > + - port > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + #include <dt-bindings/clock/imx8mp-clock.h> > > > + > > > + i2c { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + camera: alvium@3c { > > > + compatible = "alliedvision,alvium"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pinctrl_csi0_pwn>, <&pinctrl_csi0_rst>, <&pinctrl_csi_mclk>; > > > + reg = <0x3c>; > > > + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; > > > + clock-names = "xclk"; > > > + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; > > > + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; > > > + assigned-clock-rates = <24000000>; > > > + streamon-delay = <20>; > > > + powerdown-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; > > > + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > > > + status = "okay"; > > > + > > > + port { > > > + alvium_out: endpoint { > > > + remote-endpoint = <&mipi_csi_0_in>; > > > + data-lanes = <1 2 3 4>; > > > + link-frequencies = /bits/ 64 <681250000>; > > > + clock-lanes = <0>; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > +... -- Regards, Laurent Pinchart
