On 26/05/2023 19:07, Yassine Oudjana wrote:
From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
The CAMSS power domain was previously enabled implicitly when the VFE
power domains were enabled.
Commit 46cc03175498 ("media: camss: Split power domain management")
delayed enabling VFE power domains which in turn delayed enabling the
CAMSS power domain. This made CSIPHY fail to enable camss_top_ahb_clk
which requires the CAMSS power domain to be on:
[ 199.097810] ------------[ cut here ]------------
[ 199.097893] camss_top_ahb_clk status stuck at 'off'
[ 199.097913] WARNING: CPU: 3 PID: 728 at drivers/clk/qcom/clk-branch.c:91 clk_branch_wait+0x140/0x160
...
[ 199.100064] clk_branch_wait+0x140/0x160
[ 199.100112] clk_branch2_enable+0x30/0x40
[ 199.100159] clk_core_enable+0x6c/0xb0
[ 199.100211] clk_enable+0x2c/0x50
[ 199.100257] camss_enable_clocks+0x94/0xe0 [qcom_camss]
[ 199.100342] csiphy_set_power+0x154/0x2a0 [qcom_camss]
...
[ 199.101594] ---[ end trace 0000000000000000 ]---
Link the CAMSS power domain in camss_configure_pd to make sure it gets
enabled before CSIPHY tries to enable clocks.
Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
drivers/media/platform/qcom/camss/camss.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 1ef26aea3eae..9aea8220d923 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1453,6 +1453,7 @@ static const struct media_device_ops camss_media_ops = {
static int camss_configure_pd(struct camss *camss)
{
struct device *dev = camss->dev;
+ int camss_pd_index;
int i;
int ret;
@@ -1496,7 +1497,13 @@ static int camss_configure_pd(struct camss *camss)
}
}
- if (i > camss->vfe_num) {
+ /* Link CAMSS power domain if available */
+ camss_pd_index = device_property_match_string(camss->dev, "power-domain-names", "camss");
+ if (camss_pd_index >= 0)
Surely if you get this far you already know that
camss->genpd_num = of_count_phandle_with_args(dev->of_node,
"power-domains",
"#power-domain-cells");
if (camss->genpd_num < 0) {
dev_err(dev, "Power domains are not defined for camss\n");
return camss->genpd_num;
}
So you don't need to add this additional dependency ?
---
bod
