On 24.05.2023 19:38, Caleb Connolly wrote:
> Add a node for the smb2 charger hardware found on the pmi8998 pmic
> following the DT bindings.
>
> Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index be6f60bfc26c..73f51451d21d 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -9,6 +9,26 @@ pmi8998_lsid0: pmic@2 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> + pmi8998_charger: charger@1000 {
> + compatible = "qcom,pmi8998-charger";
> + reg = <0x1000>;
> +
> + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
> + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "usb-plugin",
> + "bat-ov",
> + "wdog-bark",
> + "usbin-icl-change";
> +
> + io-channels = <&pmi8998_rradc 3>,
> + <&pmi8998_rradc 4>;
> + io-channel-names = "usbin_i", "usbin_v";
Are these hard-wired internally?
Konrad
> +
> + status = "disabled";
> + };
> +
> pmi8998_gpios: gpio@c000 {
> compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
> reg = <0xc000>;
>
