Move some DT "status" properties so that they're the last specified
property (before sub-nodes).
Signed-off-by: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
---
arch/arm/boot/dts/bcm11351.dtsi | 8 ++++----
arch/arm/boot/dts/bcm21664.dtsi | 6 +++---
arch/arm/boot/dts/bcm23550.dtsi | 6 +++---
arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++----
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index f395e95e0177..773d717de7f0 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -51,42 +51,42 @@ smc@3404c000 {
serial@3e000000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e000000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
serial@3e001000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e001000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
serial@3e002000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e002000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
serial@3e003000 {
compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e003000 0x1000>;
clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
L2: l2-cache@3ff20000 {
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 19ade84e42c1..9e3835a0a7ef 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -51,32 +51,32 @@ smc@3404e000 {
serial@3e000000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e000000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
serial@3e001000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e001000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
serial@3e002000 {
compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
- status = "disabled";
reg = <0x3e002000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
L2: cache-controller@3ff20000 {
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index ed3ce2fabca6..445eadb8d871 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -129,32 +129,32 @@ slaves@3e000000 {
uartb: serial@0 {
compatible = "snps,dw-apb-uart";
- status = "disabled";
reg = <0x00000000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
uartb2: serial@1000 {
compatible = "snps,dw-apb-uart";
- status = "disabled";
reg = <0x00001000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
uartb3: serial@2000 {
compatible = "snps,dw-apb-uart";
- status = "disabled";
reg = <0x00002000 0x118>;
clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ status = "disabled";
};
bsc1: i2c@16000 {
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index c496e33a71a6..0a8ad1d673d8 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -21,23 +21,23 @@ serial@3e000000 {
};
i2c@3e016000 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
};
i2c@3e017000 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
};
i2c@3e018000 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
};
i2c@3500d000 {
- status = "okay";
clock-frequency = <100000>;
+ status = "okay";
pmu: pmu@8 {
reg = <0x08>;
--
2.25.1
