Re: [PATCH v2 1/5] dt-bindings: input: cirrus,cs40l26: Support for CS40L26

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yo Fred,

Tooling does not like your series very much, prob the missing v2's on
some patches:
	Grabbing thread from lore.kernel.org/all/1685059471-9598-1-git-send-email-fred.treven%40cirrus.com/t.mbox.gz
	Checking for newer revisions
	Grabbing search results from lore.kernel.org
	Analyzing 6 messages in the thread
	Will use the latest revision: v2
	You can pick other revisions using the -vN flag
	Checking attestation on all messages, may take a moment...
	---
	  ✓ [PATCH v2 1/5] dt-bindings: input: cirrus,cs40l26: Support for CS40L26
	    ✓ Signed: DKIM/cirrus.com
	    + Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
	  ✓ [PATCH v2 2/5] Input: cs40l26 - Support for CS40L26 Haptic Device
	    ✓ Signed: DKIM/cirrus.com
	    + Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
	  ERROR: missing [3/5]!
	  ERROR: missing [4/5]!
	  ERROR: missing [5/5]!
	
On Thu, May 25, 2023 at 07:04:27PM -0500, Fred Treven wrote:
> Introduce required basic devicetree parameters for the
> initial commit of CS40L26.
> 
> Signed-off-by: Fred Treven <fred.treven@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/input/cirrus,cs40l26.yaml  | 102 +++++++++++++++++++++
>  MAINTAINERS                                        |  10 ++
>  2 files changed, 112 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
> new file mode 100644
> index 000000000000..9cbc964ebded
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/cirrus,cs40l26.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic CS40L26 Boosted Haptic Amplifier
> +
> +maintainers:
> +  - Fred Treven <fred.treven@xxxxxxxxxx>
> +
> +description:
> +  CS40L26 is a Boosted Haptic Driver with Integrated DSP and Waveform Memory
> +  with Advanced Closed Loop Algorithms and LRA protection
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cirrus,cs40l26a
> +      - cirrus,cs40l26b
> +      - cirrus,cs40l27a
> +      - cirrus,cs40l27b

I had a _brief_ look at the driver - you don't seem to have any match
data, so are all of these devices actually compatible with eachother?

IOW, should this be:
properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - cirrus,cs40l26b
              - cirrus,cs40l27a
              - cirrus,cs40l27b
          - const: cirrus,cs40l26a

      - const: cirrus,cs40l26a

And then drop all but the cs40l26a in the driver? Apologies if I missed
some difference in there.

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  VA-supply:
> +    description: Regulator for VA analog voltage
> +
> +  VP-supply:
> +    description: Regulator for VP peak voltage
> +
> +  cirrus,bst-ipk-microamp:

Are these namings ripped from a datasheet? "bst-ipk" doesn't immediately
mean anything to me, but I am not familiar with these devices.

> +    description:
> +      Maximum amount of current that can be drawn by the device's boost converter.
> +    multipleOf: 50000
> +    minimum: 1600000
> +    maximum: 4800000
> +    default: 4500000
> +
> +  cirrus,bst-ctl-microvolt:

Ditto here. If there aren't rips, then maybe it'd be a good idea to use
full words.

> +    description: Maximum target voltage to which DSP may increase the VBST supply.
> +    multipleOf: 50000
> +    minimum: 2550000
> +    maximum: 11000000
> +    default: 11000000
> +
> +  cirrus,bst-exploratory-mode-disable:

This one is a lot better ;)

> +    description:
> +      Disable boost exploratory mode.
> +
> +      In exploratory mode the analog maximum peak current limit of 4.5 A
> +      (tolerance of + 160 mA) will be applied. This is required for the
> +      device to successfully detect a boost inductor short.
> +
> +      Boost exploratory mode allows the device to overshoot the set boost peak
> +      current limit (i.e. if current peak limit is set to 2.5 A to protect the
> +      battery inductor, the current limit will be opened up to 4.5 A for
> +      several milliseconds at boost startup).
> +      This has potential to damage the boost inductor.
> +
> +      Disabling this mode will prevent this from happening; it will also
> +      prevent the device from detecting boost inductor short errors.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/input/input.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      cs40l26@58 {

Generally using generic node names what we want, so something matching
the class of device. Section 2.2.2 "Generic Names Recommendation" of the
dt spec contains a bunch of ones to pick from, but I don't really know
where "haptic amplifier" fits in!

Cheers,
Conor.

> +        compatible = "cirrus,cs40l26a";
> +        reg = <0x58>;
> +        interrupt-parent = <&gpio>;
> +        interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
> +        reset-gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
> +        VA-supply = <&dummy_vreg>;
> +        VP-supply = <&dummy_vreg>;
> +        cirrus,bst-ctl-microvolt = <2600000>;
> +        cirrus,bst-ipk-microamp = <1650000>;
> +        cirrus,bst-exploratory-mode-disable;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2b073facf399..d72ed4957b0b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4926,6 +4926,16 @@ L:	netdev@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	drivers/net/ethernet/cirrus/ep93xx_eth.c
>  
> +CIRRUS LOGIC HAPTICS DRIVER
> +M:	Fred Treven <fred.treven@xxxxxxxxxx>
> +M:	Ben Bright <ben.bright@xxxxxxxxxx>
> +M:	James Ogletree <james.ogletree@xxxxxxxxxx>
> +L:	patches@xxxxxxxxxxxxxxxxxxxxx
> +S:	Supported
> +W:	https://github.com/CirrusLogic/linux-drivers/wiki
> +T:	git https://github.com/CirrusLogic/linux-drivers.git
> +F:	Documentation/devicetree/bindings/input/cirrus,cs40l26.yaml
> +
>  CIRRUS LOGIC LOCHNAGAR DRIVER
>  M:	Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
>  M:	Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
> -- 
> 2.7.4
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux