Kionix KX132-1211 is a tri-axis 16-bit accelerometer that can support ranges from ±2G to ±16G, digital output through I²C/SPI. Add support for basic accelerometer features such as reading acceleration via IIO using raw reads, triggered buffer (data-ready), or the WMI IRQ. Datasheet: https://kionixfs.azureedge.net/en/document/KX132-1211-Technical-Reference-Manual-Rev-5.0.pdf Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx> --- v4: - added KX132_REG_CNTL5 to the volatile ranges - added the kionix reserved regs to the read_only ranges - removed KX132_REG_MAN_WAKEUP from the write_only ranges v3: - fixed the warning of the kernel test robot in kx132_get_fifo_bytes (invalid assignment: &=, left side has type restricted __le16 right side has type unsigned short) v2: - mentioned the kx132-1211 in the Kconfig - added a kx132-specific get_fifo_bytes function - changed the device name from "kx132" to "kx132-1211 drivers/iio/accel/Kconfig | 8 +- drivers/iio/accel/kionix-kx022a-i2c.c | 2 + drivers/iio/accel/kionix-kx022a-spi.c | 2 + drivers/iio/accel/kionix-kx022a.c | 162 ++++++++++++++++++++++++++ drivers/iio/accel/kionix-kx022a.h | 52 +++++++++ 5 files changed, 222 insertions(+), 4 deletions(-) diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index b6b45d359f28..d8cc6e6f2bb9 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -418,8 +418,8 @@ config IIO_KX022A_SPI select IIO_KX022A select REGMAP_SPI help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix KX022A, KX132-1211 digital tri-axis + accelerometers connected to SPI interface. config IIO_KX022A_I2C tristate "Kionix KX022A tri-axis digital accelerometer I2C interface" @@ -427,8 +427,8 @@ config IIO_KX022A_I2C select IIO_KX022A select REGMAP_I2C help - Enable support for the Kionix KX022A digital tri-axis - accelerometer connected to I2C interface. + Enable support for the Kionix KX022A, KX132-1211 digital tri-axis + accelerometers connected to I2C interface. config KXSD9 tristate "Kionix KXSD9 Accelerometer Driver" diff --git a/drivers/iio/accel/kionix-kx022a-i2c.c b/drivers/iio/accel/kionix-kx022a-i2c.c index ce299d0446f7..4ea28d2482ec 100644 --- a/drivers/iio/accel/kionix-kx022a-i2c.c +++ b/drivers/iio/accel/kionix-kx022a-i2c.c @@ -39,12 +39,14 @@ static int kx022a_i2c_probe(struct i2c_client *i2c) static const struct i2c_device_id kx022a_i2c_id[] = { { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, { } }; MODULE_DEVICE_TABLE(i2c, kx022a_i2c_id); static const struct of_device_id kx022a_of_match[] = { { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a-spi.c b/drivers/iio/accel/kionix-kx022a-spi.c index 1e4b9d4b4b8d..3fb673ffcdeb 100644 --- a/drivers/iio/accel/kionix-kx022a-spi.c +++ b/drivers/iio/accel/kionix-kx022a-spi.c @@ -35,12 +35,14 @@ static int kx022a_spi_probe(struct spi_device *spi) static const struct spi_device_id kx022a_id[] = { { .name = "kx022a", .driver_data = (kernel_ulong_t)&kx022a_chip_info }, + { .name = "kx132-1211", .driver_data = (kernel_ulong_t)&kx132_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, kx022a_id); static const struct of_device_id kx022a_of_match[] = { { .compatible = "kionix,kx022a", .data = &kx022a_chip_info }, + { .compatible = "kionix,kx132-1211", .data = &kx132_chip_info }, { } }; MODULE_DEVICE_TABLE(of, kx022a_of_match); diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c index 20f5965e878c..327412a8a395 100644 --- a/drivers/iio/accel/kionix-kx022a.c +++ b/drivers/iio/accel/kionix-kx022a.c @@ -150,6 +150,117 @@ static const struct regmap_config kx022a_regmap_config = { .cache_type = REGCACHE_RBTREE, }; +/* Regmap configs kx132 */ +static const struct regmap_range kx132_volatile_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_COTR, + }, { + .range_min = KX132_REG_TSCP, + .range_max = KX132_REG_INT_REL, + }, { + /* The reset bit will be cleared by sensor */ + .range_min = KX132_REG_CNTL2, + .range_max = KX132_REG_CNTL2, + }, { + .range_min = KX132_REG_CNTL5, + .range_max = KX132_REG_CNTL5, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_volatile_regs = { + .yes_ranges = &kx132_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_volatile_ranges), +}; + +static const struct regmap_range kx132_precious_ranges[] = { + { + .range_min = KX132_REG_INT_REL, + .range_max = KX132_REG_INT_REL, + }, +}; + +static const struct regmap_access_table kx132_precious_regs = { + .yes_ranges = &kx132_precious_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_precious_ranges), +}; + +static const struct regmap_range kx132_read_only_ranges[] = { + { + .range_min = KX132_REG_XADP_L, + .range_max = KX132_REG_INT_REL, + }, { + .range_min = KX132_REG_BUF_STATUS_1, + .range_max = KX132_REG_BUF_STATUS_2, + }, { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, { + /* Kionix reserved registers: should not be written */ + .range_min = 0x28, + .range_max = 0x28, + }, { + .range_min = 0x35, + .range_max = 0x36, + }, { + .range_min = 0x3c, + .range_max = 0x48, + }, { + .range_min = 0x4e, + .range_max = 0x5c, + }, { + .range_min = 0x77, + .range_max = 0x7f, + }, +}; + +static const struct regmap_access_table kx132_ro_regs = { + .no_ranges = &kx132_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_read_only_ranges), +}; + +static const struct regmap_range kx132_write_only_ranges[] = { + { + .range_min = KX132_REG_SELF_TEST, + .range_max = KX132_REG_SELF_TEST, + }, { + .range_min = KX132_REG_BUF_CLEAR, + .range_max = KX132_REG_BUF_CLEAR, + }, +}; + +static const struct regmap_access_table kx132_wo_regs = { + .no_ranges = &kx132_write_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(kx132_write_only_ranges), +}; + +static const struct regmap_range kx132_noinc_read_ranges[] = { + { + .range_min = KX132_REG_BUF_READ, + .range_max = KX132_REG_BUF_READ, + }, +}; + +static const struct regmap_access_table kx132_nir_regs = { + .yes_ranges = &kx132_noinc_read_ranges[0], + .n_yes_ranges = ARRAY_SIZE(kx132_noinc_read_ranges), +}; + +static const struct regmap_config kx132_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &kx132_volatile_regs, + .rd_table = &kx132_wo_regs, + .wr_table = &kx132_ro_regs, + .rd_noinc_table = &kx132_nir_regs, + .precious_table = &kx132_precious_regs, + .max_register = KX132_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + struct kx022a_data { const struct kx022a_chip_info *chip_info; struct regmap *regmap; @@ -239,6 +350,13 @@ static const struct iio_chan_spec kx022a_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(3), }; +static const struct iio_chan_spec kx132_channels[] = { + KX022A_ACCEL_CHAN(X, KX132_REG_XOUT_L, 0), + KX022A_ACCEL_CHAN(Y, KX132_REG_YOUT_L, 1), + KX022A_ACCEL_CHAN(Z, KX132_REG_ZOUT_L, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + /* * The sensor HW can support ODR up to 1600 Hz, which is beyond what most of the * Linux CPUs can handle without dropping samples. Also, the low power mode is @@ -613,6 +731,24 @@ static int kx022a_get_fifo_bytes(struct kx022a_data *data) return fifo_bytes; } +static int kx132_get_fifo_bytes(struct kx022a_data *data) +{ + __le16 buf_status; + int ret, fifo_bytes; + + ret = regmap_bulk_read(data->regmap, data->chip_info->buf_status1, + &buf_status, sizeof(buf_status)); + if (ret) { + dev_err(data->dev, "Error reading buffer status\n"); + return ret; + } + + fifo_bytes = le16_to_cpu(buf_status); + fifo_bytes &= data->chip_info->buf_smp_lvl_mask; + + return fifo_bytes; +} + static int __kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples, bool irq) { @@ -1036,6 +1172,32 @@ const struct kx022a_chip_info kx022a_chip_info = { }; EXPORT_SYMBOL_NS_GPL(kx022a_chip_info, IIO_KX022A); +const struct kx022a_chip_info kx132_chip_info = { + .name = "kx132-1211", + .regmap_config = &kx132_regmap_config, + .channels = kx132_channels, + .num_channels = ARRAY_SIZE(kx132_channels), + .fifo_length = KX132_FIFO_LENGTH, + .who = KX132_REG_WHO, + .id = KX132_ID, + .cntl = KX132_REG_CNTL, + .cntl2 = KX132_REG_CNTL2, + .odcntl = KX132_REG_ODCNTL, + .buf_cntl1 = KX132_REG_BUF_CNTL1, + .buf_cntl2 = KX132_REG_BUF_CNTL2, + .buf_clear = KX132_REG_BUF_CLEAR, + .buf_status1 = KX132_REG_BUF_STATUS_1, + .buf_smp_lvl_mask = KX132_MASK_BUF_SMP_LVL, + .buf_read = KX132_REG_BUF_READ, + .inc1 = KX132_REG_INC1, + .inc4 = KX132_REG_INC4, + .inc5 = KX132_REG_INC5, + .inc6 = KX132_REG_INC6, + .xout_l = KX132_REG_XOUT_L, + .get_fifo_bytes = kx132_get_fifo_bytes, +}; +EXPORT_SYMBOL_NS_GPL(kx132_chip_info, IIO_KX022A); + int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info) { static const char * const regulator_names[] = {"io-vdd", "vdd"}; diff --git a/drivers/iio/accel/kionix-kx022a.h b/drivers/iio/accel/kionix-kx022a.h index 7792907534b5..351867a95f8c 100644 --- a/drivers/iio/accel/kionix-kx022a.h +++ b/drivers/iio/accel/kionix-kx022a.h @@ -74,6 +74,57 @@ #define KX022A_REG_SELF_TEST 0x60 #define KX022A_MAX_REGISTER 0x60 +#define KX132_REG_WHO 0x13 +#define KX132_ID 0x3d + +#define KX132_FIFO_LENGTH 86 + +#define KX132_REG_CNTL 0x1b +#define KX132_REG_CNTL2 0x1c +#define KX132_REG_CNTL5 0x1f +#define KX132_MASK_RES BIT(6) +#define KX132_GSEL_2 0x0 +#define KX132_GSEL_4 BIT(3) +#define KX132_GSEL_8 BIT(4) +#define KX132_GSEL_16 GENMASK(4, 3) + +#define KX132_REG_INS2 0x17 +#define KX132_MASK_INS2_WMI BIT(5) + +#define KX132_REG_XADP_L 0x02 +#define KX132_REG_XOUT_L 0x08 +#define KX132_REG_YOUT_L 0x0a +#define KX132_REG_ZOUT_L 0x0c +#define KX132_REG_COTR 0x12 +#define KX132_REG_TSCP 0x14 +#define KX132_REG_INT_REL 0x1a + +#define KX132_REG_ODCNTL 0x21 + +#define KX132_REG_BTS_WUF_TH 0x4a + +#define KX132_REG_BUF_CNTL1 0x5e +#define KX132_REG_BUF_CNTL2 0x5f +#define KX132_REG_BUF_STATUS_1 0x60 +#define KX132_REG_BUF_STATUS_2 0x61 +#define KX132_MASK_BUF_SMP_LVL GENMASK(9, 0) +#define KX132_REG_BUF_CLEAR 0x62 +#define KX132_REG_BUF_READ 0x63 +#define KX132_ODR_SHIFT 3 +#define KX132_FIFO_MAX_WMI_TH 86 + +#define KX132_REG_INC1 0x22 +#define KX132_REG_INC5 0x26 +#define KX132_REG_INC6 0x27 +#define KX132_IPOL_LOW 0 +#define KX132_IPOL_HIGH KX022A_MASK_IPOL +#define KX132_ITYP_PULSE KX022A_MASK_ITYP + +#define KX132_REG_INC4 0x25 + +#define KX132_REG_SELF_TEST 0x5d +#define KX132_MAX_REGISTER 0x76 + struct device; struct kx022a_data; @@ -131,5 +182,6 @@ struct kx022a_chip_info { int kx022a_probe_internal(struct device *dev, const struct kx022a_chip_info *chip_info); extern const struct kx022a_chip_info kx022a_chip_info; +extern const struct kx022a_chip_info kx132_chip_info; #endif -- 2.30.2
