The QSPI controller needs three clock items to work properly on StarFive JH7110 SoC, so there is need to change the maxItems's value to 3. Other platforms do not have this constraint. Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx> --- .../devicetree/bindings/spi/cdns,qspi-nor.yaml | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index b310069762dd..737f1c162e01 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -26,6 +26,15 @@ allOf: const: starfive,jh7110-qspi then: properties: + clocks: + maxItems: 3 + + clock-names: + items: + - const: qspi-ref + - const: qspi-ahb + - const: qspi-apb + resets: minItems: 2 maxItems: 3 @@ -38,6 +47,9 @@ allOf: else: properties: + clocks: + maxItems: 1 + resets: maxItems: 2 @@ -69,9 +81,6 @@ properties: interrupts: maxItems: 1 - clocks: - maxItems: 1 - cdns,fifo-depth: description: Size of the data FIFO in words. -- 2.34.1