Add the PWM function to the pm8550 dtsi, this is usually used
to drive RGB leds on platforms using this PMIC.
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8550.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 33f357a80636..db3d5c17a77d 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -61,5 +61,15 @@ pm8550_flash: led-controller@ee00 {
reg = <0xee00>;
status = "disabled";
};
+
+ pm8550_pwm: pwm {
+ compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
};
};
--
2.34.1
