Re: [PATCH v3 08/11] serial: sc16is7xx: fix regression with GPIO configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 25 May 2023 15:03:41 +0300 (EEST)
Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:

> On Thu, 25 May 2023, Hugo Villeneuve wrote:
> 
> > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > 
> > Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
> > and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines")
> > changed the function of the GPIOs pins to act as modem control
> > lines without any possibility of selecting GPIO function.
> > 
> > As a consequence, applications that depends on GPIO lines configured
> > by default as GPIO pins no longer work as expected.
> > 
> > Also, the change to select modem control lines function was done only
> > for channel A of dual UART variants (752/762). This was not documented
> > in the log message.
> > 
> > This new patch allows to specify GPIO or modem control line function
> > in the device tree, and for each of the ports (A or B).
> > 
> > This is done by using the new device-tree property named
> > "modem-control-line-ports" (property added in separate patch).
> > 
> > We also now reduce the number of exported GPIOs according to the
> > modem-status-line-port DT property.
> > 
> > Boards that need to have GPIOS configured as modem control lines
> > should add that property to their device tree. Here is a list of
> > boards using the sc16is7xx driver in their device tree and that may
> > need to be modified:
> >     arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
> >     mips/boot/dts/ingenic/cu1830-neo.dts
> >     mips/boot/dts/ingenic/cu1000-neo.dts
> > 
> > Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines")
> > Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines")
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > ---
> >  drivers/tty/serial/sc16is7xx.c | 65 +++++++++++++++++++++++-----------
> >  1 file changed, 44 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> > index a5d8af0f6da0..97ec532a0a19 100644
> > --- a/drivers/tty/serial/sc16is7xx.c
> > +++ b/drivers/tty/serial/sc16is7xx.c
> > @@ -236,7 +236,8 @@
> >  
> >  /* IOControl register bits (Only 75x/76x) */
> >  #define SC16IS7XX_IOCONTROL_LATCH_BIT	(1 << 0) /* Enable input latching */
> > -#define SC16IS7XX_IOCONTROL_MODEM_BIT	(1 << 1) /* Enable GPIO[7:4] as modem pins */
> > +#define SC16IS7XX_IOCONTROL_MODEM_A_BIT	(1 << 1) /* Enable GPIO[7:4] as modem A pins */
> > +#define SC16IS7XX_IOCONTROL_MODEM_B_BIT	(1 << 2) /* Enable GPIO[3:0] as modem B pins */
> >  #define SC16IS7XX_IOCONTROL_SRESET_BIT	(1 << 3) /* Software Reset */
> >  
> >  /* EFCR register bits */
> > @@ -301,12 +302,12 @@
> >  /* Misc definitions */
> >  #define SC16IS7XX_FIFO_SIZE		(64)
> >  #define SC16IS7XX_REG_SHIFT		2
> > +#define SC16IS7XX_GPIOS_PER_BANK	4
> >  
> >  struct sc16is7xx_devtype {
> >  	char	name[10];
> >  	int	nr_gpio;
> >  	int	nr_uart;
> > -	int	has_mctrl;
> >  };
> >  
> >  #define SC16IS7XX_RECONF_MD		(1 << 0)
> > @@ -336,6 +337,7 @@ struct sc16is7xx_port {
> >  	struct clk			*clk;
> >  #ifdef CONFIG_GPIOLIB
> >  	struct gpio_chip		gpio;
> > +	int				gpio_configured;
> >  #endif
> >  	unsigned char			buf[SC16IS7XX_FIFO_SIZE];
> >  	struct kthread_worker		kworker;
> > @@ -447,35 +449,30 @@ static const struct sc16is7xx_devtype sc16is74x_devtype = {
> >  	.name		= "SC16IS74X",
> >  	.nr_gpio	= 0,
> >  	.nr_uart	= 1,
> > -	.has_mctrl	= 0,
> >  };
> >  
> >  static const struct sc16is7xx_devtype sc16is750_devtype = {
> >  	.name		= "SC16IS750",
> > -	.nr_gpio	= 4,
> > +	.nr_gpio	= 8,
> >  	.nr_uart	= 1,
> > -	.has_mctrl	= 1,
> >  };
> >  
> >  static const struct sc16is7xx_devtype sc16is752_devtype = {
> >  	.name		= "SC16IS752",
> > -	.nr_gpio	= 0,
> > +	.nr_gpio	= 8,
> >  	.nr_uart	= 2,
> > -	.has_mctrl	= 1,
> >  };
> >  
> >  static const struct sc16is7xx_devtype sc16is760_devtype = {
> >  	.name		= "SC16IS760",
> > -	.nr_gpio	= 4,
> > +	.nr_gpio	= 8,
> >  	.nr_uart	= 1,
> > -	.has_mctrl	= 1,
> >  };
> >  
> >  static const struct sc16is7xx_devtype sc16is762_devtype = {
> >  	.name		= "SC16IS762",
> > -	.nr_gpio	= 0,
> > +	.nr_gpio	= 8,
> >  	.nr_uart	= 2,
> > -	.has_mctrl	= 1,
> >  };
> >  
> >  static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
> > @@ -1396,6 +1393,10 @@ static int sc16is7xx_probe(struct device *dev,
> >  		return -ENOMEM;
> >  	}
> >  
> > +#ifdef CONFIG_GPIOLIB
> > +	s->gpio_configured = devtype->nr_gpio;
> > +#endif /* CONFIG_GPIOLIB */
> > +
> >  	/* Always ask for fixed clock rate from a property. */
> >  	device_property_read_u32(dev, "clock-frequency", &uartclk);
> >  
> > @@ -1473,12 +1474,6 @@ static int sc16is7xx_probe(struct device *dev,
> >  				     SC16IS7XX_EFCR_RXDISABLE_BIT |
> >  				     SC16IS7XX_EFCR_TXDISABLE_BIT);
> >  
> > -		/* Use GPIO lines as modem status registers */
> > -		if (devtype->has_mctrl)
> > -			sc16is7xx_port_write(&s->p[i].port,
> > -					     SC16IS7XX_IOCONTROL_REG,
> > -					     SC16IS7XX_IOCONTROL_MODEM_BIT);
> > -
> >  		/* Initialize kthread work structs */
> >  		kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc);
> >  		kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc);
> > @@ -1514,10 +1509,38 @@ static int sc16is7xx_probe(struct device *dev,
> >  					 prop, p, u)
> >  			if (u < devtype->nr_uart)
> >  				s->p[u].irda_mode = true;
> > +
> > +		val = 0;
> > +
> > +		of_property_for_each_u32(dev->of_node, "nxp,modem-control-line-ports",
> > +					 prop, p, u)
> > +			if (u < devtype->nr_uart) {
> 
> Reverse logic + use continue. It will help with the indentation levels.

Good suggestion, done.

 
> > +				/* Use GPIO lines as modem control lines */
> > +				if (u == 0)
> > +					val |= SC16IS7XX_IOCONTROL_MODEM_A_BIT;
> > +				else if (u == 1)
> > +					val |= SC16IS7XX_IOCONTROL_MODEM_B_BIT;
> > +
> > +#ifdef CONFIG_GPIOLIB
> > +				if (s->gpio_configured >=
> > +				    SC16IS7XX_GPIOS_PER_BANK)
> > +					s->gpio_configured -=
> > +						SC16IS7XX_GPIOS_PER_BANK;
> > +#endif /* CONFIG_GPIOLIB */
> > +			}
> 
> Please use braces for of_property_for_each_u32 block.

Done

 
> > +
> > +		if (val)
> > +			regmap_update_bits(
> > +				s->regmap,
> > +				SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT,
> > +				SC16IS7XX_IOCONTROL_MODEM_A_BIT |
> > +				SC16IS7XX_IOCONTROL_MODEM_B_BIT, val);
> >  	}
> >  
> >  #ifdef CONFIG_GPIOLIB
> > -	if (devtype->nr_gpio) {
> > +	dev_dbg(dev, "GPIOs to configure: %d\n", s->gpio_configured);
> > +
> > +	if (s->gpio_configured) {
> >  		/* Setup GPIO controller */
> >  		s->gpio.owner		 = THIS_MODULE;
> >  		s->gpio.parent		 = dev;
> > @@ -1527,7 +1550,7 @@ static int sc16is7xx_probe(struct device *dev,
> >  		s->gpio.direction_output = sc16is7xx_gpio_direction_output;
> >  		s->gpio.set		 = sc16is7xx_gpio_set;
> >  		s->gpio.base		 = -1;
> > -		s->gpio.ngpio		 = devtype->nr_gpio;
> > +		s->gpio.ngpio		 = s->gpio_configured;
> >  		s->gpio.can_sleep	 = 1;
> >  		ret = gpiochip_add_data(&s->gpio, s);
> >  		if (ret)
> > @@ -1555,7 +1578,7 @@ static int sc16is7xx_probe(struct device *dev,
> >  		return 0;
> >  
> >  #ifdef CONFIG_GPIOLIB
> > -	if (devtype->nr_gpio)
> > +	if (s->gpio_configured)
> >  		gpiochip_remove(&s->gpio);
> >  
> >  out_thread:
> > @@ -1581,7 +1604,7 @@ static void sc16is7xx_remove(struct device *dev)
> >  	int i;
> >  
> >  #ifdef CONFIG_GPIOLIB
> > -	if (s->devtype->nr_gpio)
> > +	if (s->gpio_configured)
> >  		gpiochip_remove(&s->gpio);
> >  #endif
> >  
> > 
> 
> -- 
>  i.
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux