On Mon, 15 May 2023, Jakob Hauser wrote: > Order the register blocks to have the masks in descending manner. > > Add new defines for constant voltage shift (RT5033_CHGCTRL2_CV_SHIFT), > MIVR mask (RT5033_CHGCTRL4_MIVR_MASK), pre-charge current shift > (RT5033_CHGCTRL4_IPREC_SHIFT), internal timer disable > (RT5033_INT_TIMER_DISABLE), termination disable (RT5033_TE_DISABLE), > CFO disable (RT5033_CFO_DISABLE), UUG disable (RT5033_CHARGER_UUG_DISABLE). > > The fast charge timer type needs to be written on mask 0x38 > (RT5033_CHGCTRL3_TIMER_MASK). To avoid a bit shift on application, change the > values of the timer types to fit the mask. Added the timout duration as a > comment. And the timer between TIMER8 and TIMER12 is most likely TIMER10, see > e.g. RT5036 [1] page 28 bottom. > > Add value options for MIVR (Minimum Input Voltage Regulation). > > Move RT5033_TE_ENABLE_MASK to the block "RT5033 CHGCTRL1 register", in order > to have the masks of the register collected there. To fit the naming scheme, > rename it to RT5033_CHGCTRL1_TE_EN_MASK. > > Move RT5033_CHG_MAX_CURRENT to the block "RT5033 charger fast-charge current". > > Add new defines RT5033_CV_MAX_VOLTAGE and RT5033_CHG_MAX_PRE_CURRENT to the > blocks "RT5033 charger constant charge voltage" and "RT5033 charger pre-charge > current limits". > > In include/linux/mfd/rt5033.h, turn power_supply "psy" into a pointer in order > to use it in devm_power_supply_register(). > > [1] https://media.digikey.com/pdf/Data%20Sheets/Richtek%20PDF/RT5036%20%20Preliminary.pdf > > Signed-off-by: Jakob Hauser <jahau@xxxxxxxxxxxxxx> > --- > include/linux/mfd/rt5033-private.h | 53 ++++++++++++++++++++---------- > include/linux/mfd/rt5033.h | 2 +- > 2 files changed, 36 insertions(+), 19 deletions(-) > > diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h > index b6773ebf4e6b..0221f806d139 100644 > --- a/include/linux/mfd/rt5033-private.h > +++ b/include/linux/mfd/rt5033-private.h > @@ -55,22 +55,24 @@ enum rt5033_reg { > }; > > /* RT5033 Charger state register */ > +#define RT5033_CHG_STAT_TYPE_MASK 0x60 > +#define RT5033_CHG_STAT_TYPE_PRE 0x20 > +#define RT5033_CHG_STAT_TYPE_FAST 0x60 > #define RT5033_CHG_STAT_MASK 0x30 > #define RT5033_CHG_STAT_DISCHARGING 0x00 > #define RT5033_CHG_STAT_FULL 0x10 > #define RT5033_CHG_STAT_CHARGING 0x20 > #define RT5033_CHG_STAT_NOT_CHARGING 0x30 > -#define RT5033_CHG_STAT_TYPE_MASK 0x60 > -#define RT5033_CHG_STAT_TYPE_PRE 0x20 > -#define RT5033_CHG_STAT_TYPE_FAST 0x60 > > /* RT5033 CHGCTRL1 register */ > #define RT5033_CHGCTRL1_IAICR_MASK 0xe0 > -#define RT5033_CHGCTRL1_MODE_MASK 0x01 > +#define RT5033_CHGCTRL1_TE_EN_MASK 0x08 > #define RT5033_CHGCTRL1_HZ_MASK 0x02 > +#define RT5033_CHGCTRL1_MODE_MASK 0x01 > > /* RT5033 CHGCTRL2 register */ > #define RT5033_CHGCTRL2_CV_MASK 0xfc > +#define RT5033_CHGCTRL2_CV_SHIFT 0x02 > > /* RT5033 DEVICE_ID register */ > #define RT5033_VENDOR_ID_MASK 0xf0 > @@ -82,14 +84,15 @@ enum rt5033_reg { > #define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01 > > /* RT5033 CHGCTRL4 register */ > -#define RT5033_CHGCTRL4_EOC_MASK 0x07 > +#define RT5033_CHGCTRL4_MIVR_MASK 0xe0 > #define RT5033_CHGCTRL4_IPREC_MASK 0x18 > +#define RT5033_CHGCTRL4_IPREC_SHIFT 0x03 > +#define RT5033_CHGCTRL4_EOC_MASK 0x07 > > /* RT5033 CHGCTRL5 register */ > -#define RT5033_CHGCTRL5_VPREC_MASK 0x0f > #define RT5033_CHGCTRL5_ICHG_MASK 0xf0 > #define RT5033_CHGCTRL5_ICHG_SHIFT 0x04 > -#define RT5033_CHG_MAX_CURRENT 0x0d > +#define RT5033_CHGCTRL5_VPREC_MASK 0x0f > > /* RT5033 RT CTRL1 register */ > #define RT5033_RT_CTRL1_UUG_MASK 0x02 > @@ -128,20 +131,28 @@ enum rt5033_reg { > #define RT5033_AICR_1500_MODE 0xc0 > #define RT5033_AICR_2000_MODE 0xe0 > > -/* RT5033 use internal timer need to set time */ > -#define RT5033_FAST_CHARGE_TIMER4 0x00 > -#define RT5033_FAST_CHARGE_TIMER6 0x01 > -#define RT5033_FAST_CHARGE_TIMER8 0x02 > -#define RT5033_FAST_CHARGE_TIMER9 0x03 > -#define RT5033_FAST_CHARGE_TIMER12 0x04 > -#define RT5033_FAST_CHARGE_TIMER14 0x05 > -#define RT5033_FAST_CHARGE_TIMER16 0x06 > +/* RT5033 charger minimum input voltage regulation */ > +#define RT5033_CHARGER_MIVR_DISABLE 0x00 > +#define RT5033_CHARGER_MIVR_4200MV 0x20 > +#define RT5033_CHARGER_MIVR_4300MV 0x40 > +#define RT5033_CHARGER_MIVR_4400MV 0x60 > +#define RT5033_CHARGER_MIVR_4500MV 0x80 > +#define RT5033_CHARGER_MIVR_4600MV 0xa0 > +#define RT5033_CHARGER_MIVR_4700MV 0xc0 > +#define RT5033_CHARGER_MIVR_4800MV 0xe0 > > +/* RT5033 use internal timer need to set time */ > +#define RT5033_FAST_CHARGE_TIMER4 0x00 /* 4 hrs */ > +#define RT5033_FAST_CHARGE_TIMER6 0x08 /* 6 hrs */ > +#define RT5033_FAST_CHARGE_TIMER8 0x10 /* 8 hrs */ > +#define RT5033_FAST_CHARGE_TIMER10 0x18 /* 10 hrs */ > +#define RT5033_FAST_CHARGE_TIMER12 0x20 /* 12 hrs */ > +#define RT5033_FAST_CHARGE_TIMER14 0x28 /* 14 hrs */ > +#define RT5033_FAST_CHARGE_TIMER16 0x30 /* 16 hrs */ > + > +#define RT5033_INT_TIMER_DISABLE 0x00 > #define RT5033_INT_TIMER_ENABLE 0x01 > > -/* RT5033 charger termination enable mask */ > -#define RT5033_TE_ENABLE_MASK 0x08 > - > /* > * RT5033 charger opa mode. RT5033 has two opa modes for OTG: charger mode > * and boost mode. > @@ -150,25 +161,30 @@ enum rt5033_reg { > #define RT5033_BOOST_MODE 0x01 > > /* RT5033 charger termination enable */ > +#define RT5033_TE_DISABLE 0x00 > #define RT5033_TE_ENABLE 0x08 > > /* RT5033 charger CFO enable */ > +#define RT5033_CFO_DISABLE 0x00 > #define RT5033_CFO_ENABLE 0x40 > > /* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */ > #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U > #define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U > #define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U > +#define RT5033_CV_MAX_VOLTAGE 0x1e > > /* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */ > #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U > #define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U > #define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U > +#define RT5033_CHG_MAX_PRE_CURRENT 0x03 > > /* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */ > #define RT5033_CHARGER_FAST_CURRENT_MIN 700000U > #define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U > #define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U > +#define RT5033_CHG_MAX_CURRENT 0x0d > > /* > * RT5033 charger const-charge end of charger current ( > @@ -192,6 +208,7 @@ enum rt5033_reg { > * RT5033 charger UUG. It enables MOS auto control by H/W charger > * circuit. > */ > +#define RT5033_CHARGER_UUG_DISABLE 0x00 > #define RT5033_CHARGER_UUG_ENABLE 0x02 > > /* RT5033 charger high impedance mode */ > diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h > index 8f306ac15a27..e99e2ab0c1c1 100644 > --- a/include/linux/mfd/rt5033.h > +++ b/include/linux/mfd/rt5033.h > @@ -51,7 +51,7 @@ struct rt5033_charger_data { > struct rt5033_charger { > struct device *dev; > struct rt5033_dev *rt5033; > - struct power_supply psy; > + struct power_supply *psy; Is this current unused? > struct rt5033_charger_data *chg; > }; > > -- > 2.39.2 > -- Lee Jones [李琼斯]
