Hi Vadym,
On 19/10/22 21:20, Vadym Kochan wrote:
> This series adds support for AC5 SoC.
>
> The following changes were made to add AC5 support:
>
> 1) Modify Marvell nand NFC timing set for mode 0
>
> 2) fix validation in AC5 Nand driver for ONFI timings values modes 1 and 3
>
> 3) remove unnecessary nand timing-mode in device tree of ac5.dtsi
>
> 4) add nand missing AC5X layouts , add option to use ndtr predefined values
>
> 5) Zero steps and total fields of ecc in ecc controller initialization so
> nand_scan_tail() will calculate these two fields, otherwise
> NAND initialization will fail with kernel 5.15 and above.
>
> Aviram Dali (2):
> dt-bindings: mtd: Add AC5 specific binding
> mtd: rawnand: marvell: add support for AC5 SoC
Are you still looking into this series? I see one part made it upstream
as commit 68c18dae6888 ("mtd: rawnand: marvell: add missing layouts")
and there was an off-shoot series around converting the DT binding.
> Vadym Kochan (1):
> mtd: rawnand: Partially revert 4114f97c41cd ("mtd: rawnand: Get rid of
> a few unused definitions")
>
> .../devicetree/bindings/mtd/marvell-nand.txt | 1 +
> drivers/mtd/nand/raw/Kconfig | 2 +-
> drivers/mtd/nand/raw/marvell_nand.c | 277 ++++++++++++++++--
> drivers/mtd/nand/raw/nand_timings.c | 14 +
> include/linux/mtd/rawnand.h | 3 +
> 5 files changed, 264 insertions(+), 33 deletions(-)
>
