On 21.05.2023 22:38, Dmitry Baryshkov wrote: > Change the UFS QMP PHY to use newer style of QMP PHY bindings (single > resource region, no per-PHY subnodes). > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad > arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++------------------ > 1 file changed, 10 insertions(+), 18 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 595533aeafc4..44a67c9274bd 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -741,9 +741,9 @@ gcc: clock-controller@100000 { > <&pcie0_lane>, > <&pcie1_lane>, > <0>, > - <&ufs_mem_phy_lanes 0>, > - <&ufs_mem_phy_lanes 1>, > - <&ufs_mem_phy_lanes 2>, > + <&ufs_mem_phy 0>, > + <&ufs_mem_phy 1>, > + <&ufs_mem_phy 2>, > <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; > clock-names = "bi_tcxo", > "sleep_clk", > @@ -4064,7 +4064,7 @@ ufs_mem_hc: ufshc@1d84000 { > <0 0x01d88000 0 0x8000>; > reg-names = "std", "ice"; > interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; > - phys = <&ufs_mem_phy_lanes>; > + phys = <&ufs_mem_phy>; > phy-names = "ufsphy"; > lanes-per-direction = <2>; > #reset-cells = <1>; > @@ -4114,10 +4114,8 @@ ufs_mem_hc: ufshc@1d84000 { > > ufs_mem_phy: phy@1d87000 { > compatible = "qcom,sm8450-qmp-ufs-phy"; > - reg = <0 0x01d87000 0 0x1c4>; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > + reg = <0 0x01d87000 0 0x1000>; > + > clock-names = "ref", "ref_aux", "qref"; > clocks = <&rpmhcc RPMH_CXO_CLK>, > <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, > @@ -4125,17 +4123,11 @@ ufs_mem_phy: phy@1d87000 { > > resets = <&ufs_mem_hc 0>; > reset-names = "ufsphy"; > - status = "disabled"; > > - ufs_mem_phy_lanes: phy@1d87400 { > - reg = <0 0x01d87400 0 0x188>, > - <0 0x01d87600 0 0x200>, > - <0 0x01d87c00 0 0x200>, > - <0 0x01d87800 0 0x188>, > - <0 0x01d87a00 0 0x200>; > - #clock-cells = <1>; > - #phy-cells = <0>; > - }; > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + status = "disabled"; > }; > > sdhc_2: mmc@8804000 {