Hi, the series is syncing the latest dt changes based on board status and the latest DT schema. The patches are based on https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@xxxxxxx/ I have applied patches which were reviewed already to have smaller series. Patches can be found https://github.com/Xilinx/linux-xlnx/tree/zynqmp/dt Or they are in Linux-next already. v1 is at https://lore.kernel.org/r/7d034b9e-e4e6-5d72-8b37-78e25918aa59@xxxxxxx. Thanks, Michal Changes in v2: - fix typo in commit message - Update commit message to skip spi-nor part - reported by Laurent - Update commit message to remove Linux part - reported by Laurent - Update commit message to remove OS content - reported by Laurent Amit Kumar Mahapatra (1): arm64: zynqmp: Set qspi tx-buswidth to 4 Ashok Reddy Soma (1): arm64: zynqmp: Fix usb node drive strength and slew rate Michal Simek (2): arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Used fixed-partitions for QSPI in k26 Radhey Shyam Pandey (2): arm64: zynqmp: Add L2 cache nodes arm64: zynqmp: Add pmu interrupt-affinity .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 8 +- .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 8 +- .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 171 +++++++++--------- .../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +- .../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +- .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 10 +- .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 8 +- .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +- .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 13 +- .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 30 ++- .../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 25 ++- .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 30 ++- .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 30 ++- .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 29 ++- .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 29 ++- .../boot/dts/xilinx/zynqmp-zcu1275-revA.dts | 2 +- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 13 ++ 17 files changed, 256 insertions(+), 156 deletions(-) -- 2.36.1
