Re: [PATCH v2 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 22 May 2023 at 15:06, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote:
>
> Add required pins for SDHCI1, so that the interface can work reliably.
>
> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>wq

Err.. an extra wq .. I think this can be fixed while applying, so
should not require a new version.

Thanks,
Bhupesh

> Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 38ee7115a35f..6f23cbfc024c 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1151,6 +1151,56 @@
>                                 pins = "gpio31";
>                                 function = "gpio";
>                         };
> +
> +                       sdc1_on_state: sdc1-on-state {
> +                               clk-pins {
> +                                       pins = "sdc1_clk";
> +                                       drive-strength = <16>;
> +                                       bias-disable;
> +                               };
> +
> +                               cmd-pins {
> +                                       pins = "sdc1_cmd";
> +                                       drive-strength = <10>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               data-pins {
> +                                       pins = "sdc1_data";
> +                                       drive-strength = <10>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               rclk-pins {
> +                                       pins = "sdc1_rclk";
> +                                       bias-pull-down;
> +                               };
> +                       };
> +
> +                       sdc1_off_state: sdc1-off-state {
> +                               clk-pins {
> +                                       pins = "sdc1_clk";
> +                                       drive-strength = <2>;
> +                                       bias-disable;
> +                               };
> +
> +                               cmd-pins {
> +                                       pins = "sdc1_cmd";
> +                                       drive-strength = <2>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               data-pins {
> +                                       pins = "sdc1_data";
> +                                       drive-strength = <2>;
> +                                       bias-pull-up;
> +                               };
> +
> +                               rclk-pins {
> +                                       pins = "sdc1_rclk";
> +                                       bias-pull-down;
> +                               };
> +                       };
>                 };
>
>                 apps_smmu: iommu@15000000 {
> --
> 2.17.1
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux