Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 25 +++++++++----------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 2b35cb3f5292..2b65c608a57e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -726,9 +726,9 @@ gcc: clock-controller@300000 {
<&pciephy_1>,
<&pciephy_2>,
<&ssusb_phy_0>,
- <&ufsphy_lane 0>,
- <&ufsphy_lane 1>,
- <&ufsphy_lane 2>;
+ <&ufsphy 0>,
+ <&ufsphy 1>,
+ <&ufsphy 2>;
clock-names = "cxo",
"cxo2",
"sleep_clk",
@@ -1993,7 +1993,7 @@ ufshc: ufshc@624000 {
reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy_lane>;
+ phys = <&ufsphy>;
phy-names = "ufsphy";
power-domains = <&gcc UFS_GDSC>;
@@ -2046,25 +2046,18 @@ ufshc: ufshc@624000 {
ufsphy: phy@627000 {
compatible = "qcom,msm8996-qmp-ufs-phy";
- reg = <0x00627000 0x1c4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ reg = <0x00627000 0x1000>;
clocks = <&gcc GCC_UFS_CLKREF_CLK>;
clock-names = "ref";
resets = <&ufshc 0>;
reset-names = "ufsphy";
- status = "disabled";
- ufsphy_lane: phy@627400 {
- reg = <0x627400 0x12c>,
- <0x627600 0x200>,
- <0x627c00 0x1b4>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
};
camss: camss@a00000 {
--
2.39.2
