From: Imran Shaik <quic_imrashai@xxxxxxxxxxx> Add support for GCC and RPMHCC clock nodes for SDX75 platform. Signed-off-by: Imran Shaik <quic_imrashai@xxxxxxxxxxx> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdx75.dtsi | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index c2b8810..dbbd2f4 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sdx75-gcc.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -23,7 +24,21 @@ reg = <0 0 0 0>; }; - clocks { }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + clock-output-names = "sleep_clk"; + #clock-cells = <0>; + }; + }; cpus { #address-cells = <2>; @@ -358,6 +373,18 @@ ranges; compatible = "simple-bus"; + gcc: clock-controller@80000 { + compatible = "qcom,sdx75-gcc"; + reg = <0x0 0x0080000 0x0 0x1f7400>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -520,6 +547,14 @@ apps_bcm_voter: bcm_voter { compatible = "qcom,bcm-voter"; }; + + rpmhcc: clock-controller { + compatible = "qcom,sdx75-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; }; -- 2.7.4