Re: [PATCH 2/2] drm/panel: Add driver for Visionox r66451 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/17/2023 5:19 PM, Dmitry Baryshkov wrote:
On 16/05/2023 23:20, Jessica Zhang wrote:
Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that
comes with the Qualcomm HDK8350 display expansion pack.

The panel enables display compression (DSC v1.2) by default.

Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
  drivers/gpu/drm/panel/Kconfig                 |   8 +
  drivers/gpu/drm/panel/Makefile                |   1 +
  drivers/gpu/drm/panel/panel-visionox-r66451.c | 395 ++++++++++++++++++++++++++
  3 files changed, 404 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 29cf5fa39ff2..9c2c36dbddf3 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -766,6 +766,14 @@ config DRM_PANEL_VISIONOX_VTDR6130
        Say Y here if you want to enable support for Visionox
        VTDR6130 1080x2400 AMOLED DSI panel.
+config DRM_PANEL_VISIONOX_R66451
+    tristate "Visionox R66451"
+    depends on OF
+    depends on DRM_MIPI_DSI
+    help
+      Say Y here if you want to enable support for Visionox
+      R66451 1080x2340 AMOLED DSI panel.
+
  config DRM_PANEL_WIDECHIPS_WS2401
      tristate "Widechips WS2401 DPI panel driver"
      depends on SPI && GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index b3e8ba29edd3..e043a92ee676 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -78,5 +78,6 @@ obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
  obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
  obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
  obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_R66451) += panel-visionox-r66451.o
  obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o
  obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o diff --git a/drivers/gpu/drm/panel/panel-visionox-r66451.c b/drivers/gpu/drm/panel/panel-visionox-r66451.c
new file mode 100644
index 000000000000..e3648ead3e84
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-visionox-r66451.c
@@ -0,0 +1,395 @@
+//SPDX-License-Identifier: GPL-2.0-only
+//Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#include <video/mipi_display.h>
+
+struct visionox_r66451 {
+    struct drm_panel panel;
+    struct mipi_dsi_device *dsi;
+    struct gpio_desc *reset_gpio;
+    struct regulator_bulk_data supplies[2];
+    bool prepared, enabled;
+};
+
+static inline struct visionox_r66451 *to_visionox_r66451(struct drm_panel *panel)
+{
+    return container_of(panel, struct visionox_r66451, panel);
+}
+
+static void visionox_r66451_reset(struct visionox_r66451 *ctx)
+{
+    gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+    usleep_range(10000, 10100);
+    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+    usleep_range(10000, 10100);
+    gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+    usleep_range(10000, 10100);
+}
+
+static int visionox_r66451_on(struct visionox_r66451 *ctx)
+{
+    struct mipi_dsi_device *dsi = ctx->dsi;
+    struct device *dev = &dsi->dev;
+    int ret;
+
+    dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xc2,
+                   0x09, 0x24, 0x0c, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
+                   0x09, 0x3c);
+    mipi_dsi_dcs_write_seq(dsi, 0xd7,
+                   0x00, 0xb9, 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
+                   0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
+                   0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
+    mipi_dsi_dcs_write_seq(dsi, 0xde,
+                   0x40, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18,
+                   0x10, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x02, 0x00, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
+    mipi_dsi_dcs_write_seq(dsi, 0xe8, 0x00, 0x02);
+    mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x00, 0x08);
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xc4,
+                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                   0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x32);
+    mipi_dsi_dcs_write_seq(dsi, 0xcf,
+                   0x64, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
+                   0x00, 0x0b, 0x77, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+                   0x02, 0x02, 0x02, 0x02, 0x02, 0x03);
+    mipi_dsi_dcs_write_seq(dsi, 0xd3,
+                   0x45, 0x00, 0x00, 0x01, 0x13, 0x15, 0x00, 0x15, 0x07,
+                   0x0f, 0x77, 0x77, 0x77, 0x37, 0xb2, 0x11, 0x00, 0xa0,
+                   0x3c, 0x9c);
+    mipi_dsi_dcs_write_seq(dsi, 0xd7,
+                   0x00, 0xb9, 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
+                   0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
+                   0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
+    mipi_dsi_dcs_write_seq(dsi, 0xd8,
+                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                   0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a,
+                   0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                   0x00, 0x0a, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,
+                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a,
+                   0x00, 0x32, 0x00, 0x0a, 0x00, 0x22);
+    mipi_dsi_dcs_write_seq(dsi, 0xdf,
+                   0x50, 0x42, 0x58, 0x81, 0x2d, 0x00, 0x00, 0x00, 0x00,
+                   0x00, 0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                   0x00, 0x00, 0x01, 0x0f, 0xff, 0xd4, 0x0e, 0x00, 0x00,
+                   0x00, 0x00, 0x00, 0x00, 0x0f, 0x53, 0xf1, 0x00, 0x00,
+                   0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x01);
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
+    mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x34, 0xb4, 0x00, 0x00, 0x00, 0x39, 0x04, 0x09, 0x34);
+    mipi_dsi_dcs_write_seq(dsi, 0xe6, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
+    mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x40);
+    mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x50, 0x00, 0x00, 0x00, 0x00);
+    mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x11);
+    mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x01, 0x00, 0x00, 0x00, 0x01);
+    mipi_dsi_dcs_write_seq(dsi, 0xf4, 0x00, 0x02);
+    mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x19);
+    mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x42);
+    mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+    mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x04, 0x37);

Please use mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);

Hi Dmitry,

Acked.


+    mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, 0x00, 0x09, 0x23);

mipi_dsi_dcs_set_page_address(dsi, 0, 2340 - 1);

Acked.


+
+    ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+    if (ret < 0) {
+        dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+        return ret;
+    }
+    msleep(120);
+
+    ret = mipi_dsi_dcs_set_display_on(dsi);

Should the mipi_dsi_dcs_set_display_on() (and maybe exit sleep mode) be a a part of _enable()? Correspondingly _off should IMO be a part of _disable callback().

Acked. Looking at the downstream code, it seems that all the dcs on commands can be sent within _enable() (and similarly for the off commands with _disable()).


+    if (ret < 0) {
+        dev_err(dev, "Failed on set display on: %d\n", ret);
+        return ret;
+    }
+    msleep(20);


Do we need to add here the following line?

dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;

Do you mean within the return on error block?

From my understanding, we should be setting the MIPI_DSI_MODE_LPM for panel_on() then unsetting MODE_LPM in panel_off().



+
+    return 0;
+}
+
+static int visionox_r66451_off(struct visionox_r66451 *ctx)
+{
+    struct mipi_dsi_device *dsi = ctx->dsi;
+    struct device *dev = &dsi->dev;
+    int ret;
+
+    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+    ret = mipi_dsi_dcs_set_display_off(dsi);
+    if (ret < 0) {
+        dev_err(dev, "Failed to set display off: %d\n", ret);
+        return ret;
+    }
+    msleep(20);
+
+    ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+    if (ret < 0) {
+        dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+        return ret;
+    }
+    msleep(120);
+
+    return 0;
+}
+
+static int visionox_r66451_prepare(struct drm_panel *panel)
+{
+    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
+    struct device *dev = &ctx->dsi->dev;
+    int ret;
+
+    if (ctx->prepared)
+        return 0;
+
+    ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
+                    ctx->supplies);
+    if (ret < 0)
+        return ret;
+
+    visionox_r66451_reset(ctx);
+
+    ret = visionox_r66451_on(ctx);
+    if (ret < 0) {
+        dev_err(dev, "Failed to initialize panel: %d\n", ret);
+        gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+        regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+        return ret;
+    }
+
+    ctx->prepared = true;
+    return 0;
+}
+
+static int visionox_r66451_unprepare(struct drm_panel *panel)
+{
+    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
+    struct device *dev = &ctx->dsi->dev;
+    int ret;
+
+    if (!ctx->prepared)
+        return 0;
+
+    ret = visionox_r66451_off(ctx);
+    if (ret < 0)
+        dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+    regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+    ctx->prepared = false;
+    return 0;
+}
+
+static const struct drm_display_mode visionox_r66451_mode = {
+    .clock = (1080 + 95 + 1 + 40) * (2340 + 25 + 1 + 4) * 120 / 1000,
+    .hdisplay = 1080,
+    .hsync_start = 1080 + 95,
+    .hsync_end = 1080 + 95 + 1,
+    .htotal = 1080 + 95 + 1 + 40,
+    .vdisplay = 2340,
+    .vsync_start = 2340 + 25,
+    .vsync_end = 2340 + 25 + 1,
+    .vtotal = 2340 + 25 + 1 + 4,
+    .width_mm = 0,
+    .height_mm = 0,

Please provide real values here.

Acked.


+};
+
+static int visionox_r66451_enable(struct drm_panel *panel)
+{
+    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
+    struct mipi_dsi_device *dsi = ctx->dsi;
+    struct drm_dsc_picture_parameter_set pps;
+    int ret;
+
+    if (ctx->enabled)
+        return 0;
+
+    if (!dsi->dsc) {
+        dev_err(&dsi->dev, "DSC not attached to DSI\n");
+        return -ENODEV;
+    }
+
+    drm_dsc_pps_payload_pack(&pps, dsi->dsc);
+    ret = mipi_dsi_picture_parameter_set(dsi, &pps);
+
+    ctx->enabled = true;
+
+    return 0;
+}
+
+static int visionox_r66451_disable(struct drm_panel *panel)
+{
+    struct visionox_r66451 *ctx = to_visionox_r66451(panel);
+
+    ctx->enabled = false;
+
+    return 0;
+}
+
+static int visionox_r66451_get_modes(struct drm_panel *panel,
+                    struct drm_connector *connector)
+{
+    struct drm_display_mode *mode;
+
+    mode = drm_mode_duplicate(connector->dev, &visionox_r66451_mode);
+    if (!mode)
+        return -ENOMEM;
+
+    drm_mode_set_name(mode);
+
+    mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+    connector->display_info.width_mm = mode->width_mm;
+    connector->display_info.height_mm = mode->height_mm;
+    drm_mode_probed_add(connector, mode);

Can we use drm_connector_helper_get_modes_fixed() instead?

Acked.


+
+    return 1;
+}
+
+static const struct drm_panel_funcs visionox_r66451_funcs = {
+    .prepare = visionox_r66451_prepare,
+    .unprepare = visionox_r66451_unprepare,
+    .get_modes = visionox_r66451_get_modes,
+    .enable = visionox_r66451_enable,
+    .disable = visionox_r66451_disable,
+};
+
+static int visionox_r66451_bl_update_status(struct backlight_device *bl)
+{
+    struct mipi_dsi_device *dsi = bl_get_data(bl);
+    u16 brightness = backlight_get_brightness(bl);
+
+    return mipi_dsi_dcs_set_display_brightness(dsi, cpu_to_le16(brightness));

mipi_dsi_dcs_set_display_brightness() already converts the brightness, so you don't need cpu_to_le16 here.

Acked.

Thanks,

Jessica Zhang


+}
+
+static const struct backlight_ops visionox_r66451_bl_ops = {
+    .update_status = visionox_r66451_bl_update_status,
+};
+
+static struct backlight_device *
+visionox_r66451_create_backlight(struct mipi_dsi_device *dsi)
+{
+    struct device *dev = &dsi->dev;
+    const struct backlight_properties props = {
+        .type = BACKLIGHT_RAW,
+        .brightness = 255,
+        .max_brightness = 4095,
+    };
+
+    return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+                          &visionox_r66451_bl_ops, &props);
+}
+
+static int visionox_r66451_probe(struct mipi_dsi_device *dsi)
+{
+    struct device *dev = &dsi->dev;
+    struct visionox_r66451 *ctx;
+    struct drm_dsc_config *dsc;
+    int ret = 0;
+
+    ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+    if (!ctx)
+        return -ENOMEM;
+
+    dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
+    if (!dsc)
+        return -ENOMEM;
+
+    /* Set DSC params */
+    dsc->dsc_version_major = 0x1;
+    dsc->dsc_version_minor = 0x2;
+
+    dsc->slice_height = 20;
+    dsc->slice_width = 540;
+    dsc->slice_count = 2;
+    dsc->bits_per_component = 8;
+    dsc->bits_per_pixel = 0x8 << 4;
+    dsc->block_pred_enable = true;
+
+    dsi->dsc = dsc;
+
+    ctx->supplies[0].supply = "vddio";
+    ctx->supplies[1].supply = "vdd";
+
+    ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
+            ctx->supplies);
+
+    if (ret < 0)
+        return ret;
+
+    ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+    if (IS_ERR(ctx->reset_gpio))
+        return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed to get reset-gpios\n");
+
+    ctx->dsi = dsi;
+    mipi_dsi_set_drvdata(dsi, ctx);
+
+    dsi->lanes = 4;
+    dsi->format = MIPI_DSI_FMT_RGB888;
+    dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+    drm_panel_init(&ctx->panel, dev, &visionox_r66451_funcs, DRM_MODE_CONNECTOR_DSI);
+    ctx->panel.backlight = visionox_r66451_create_backlight(dsi);
+    if (IS_ERR(ctx->panel.backlight))
+        return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+                "Failed to create backlight\n");
+
+    drm_panel_add(&ctx->panel);
+
+    ret = mipi_dsi_attach(dsi);
+    if (ret < 0) {
+        dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+        drm_panel_remove(&ctx->panel);
+    }
+
+    return ret;
+}
+
+static void visionox_r66451_remove(struct mipi_dsi_device *dsi)
+{
+    struct visionox_r66451 *ctx = mipi_dsi_get_drvdata(dsi);
+    int ret;
+
+    ret = mipi_dsi_detach(dsi);
+    if (ret < 0)
+        dev_err(&dsi->dev, "Failed to detach DSI host: %d\n", ret);
+
+    drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id visionox_r66451_of_match[] = {
+    {.compatible = "visionox,r66451"},
+    { /*sentinel*/ }
+};
+MODULE_DEVICE_TABLE(of, visionox_r66451_of_match);
+
+static struct mipi_dsi_driver visionox_r66451_driver = {
+    .probe = visionox_r66451_probe,
+    .remove = visionox_r66451_remove,
+    .driver = {
+        .name = "panel-visionox-r66451",
+        .of_match_table = visionox_r66451_of_match,
+    },
+};
+
+module_mipi_dsi_driver(visionox_r66451_driver);
+
+MODULE_AUTHOR("Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Panel driver for the Visionox R66451 AMOLED DSI panel");
+MODULE_LICENSE("GPL");


--
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux