Some boards use SJA1105 Ethernet Switch with SPI CPHA, while ones with
SJA1110 use SPI CPOL, so document this to fix dtbs_check warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Resend with proper net-next and Vladimir's tag.
Changes since v4:
1. Order compatibles.
2. Add tag.
Changes since v3:
1. Rebase.
2. Require cpha/cpol properties on respective variants (thus update
example).
Changes since v2:
1. Add allOf:if:then, based on feedback from Vladimir.
Changes since v1:
1. Add also cpha.
---
.../bindings/net/dsa/nxp,sja1105.yaml | 32 ++++++++++++++++---
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 9a64ed658745..4d5f5cc6d031 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -12,10 +12,6 @@ description:
cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
depends on the SPI bus master driver.
-allOf:
- - $ref: dsa.yaml#/$defs/ethernet-ports
- - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
maintainers:
- Vladimir Oltean <vladimir.oltean@xxxxxxx>
@@ -36,6 +32,9 @@ properties:
reg:
maxItems: 1
+ spi-cpha: true
+ spi-cpol: true
+
# Optional container node for the 2 internal MDIO buses of the SJA1110
# (one for the internal 100base-T1 PHYs and the other for the single
# 100base-TX PHY). The "reg" property does not have physical significance.
@@ -109,6 +108,30 @@ $defs:
1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+allOf:
+ - $ref: dsa.yaml#/$defs/ethernet-ports
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - nxp,sja1105e
+ - nxp,sja1105p
+ - nxp,sja1105q
+ - nxp,sja1105r
+ - nxp,sja1105s
+ - nxp,sja1105t
+ then:
+ properties:
+ spi-cpol: false
+ required:
+ - spi-cpha
+ else:
+ properties:
+ spi-cpha: false
+ required:
+ - spi-cpol
+
unevaluatedProperties: false
examples:
@@ -120,6 +143,7 @@ examples:
ethernet-switch@1 {
reg = <0x1>;
compatible = "nxp,sja1105t";
+ spi-cpha;
ethernet-ports {
#address-cells = <1>;
--
2.34.1
