Re: [PATCH v10 2/2] spi: loongson: add bus driver for the loongson spi controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 2023/5/17 下午12:55, Mahapatra, Amit Kumar 写道:
Hello,

-----Original Message-----
From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
Sent: Tuesday, May 16, 2023 6:42 PM
To: Mark Brown <broonie@xxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; linux-
spi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
kernel@xxxxxxxxxxxxxxx
Cc: Jianmin Lv <lvjianmin@xxxxxxxxxxx>; wanghongliang@xxxxxxxxxxx; Liu
Peibao <liupeibao@xxxxxxxxxxx>; loongson-kernel@xxxxxxxxxxxxxxxxx; Yinbo
Zhu <zhuyinbo@xxxxxxxxxxx>
Subject: [PATCH v10 2/2] spi: loongson: add bus driver for the loongson spi
controller

CAUTION: This message has originated from an External Source. Please use
proper judgment and caution when opening attachments, clicking links, or
responding to this email.


This bus driver supports the Loongson SPI hardware controller in the Loongson
platforms and supports to use DTS and PCI framework to register SPI device
resources.

Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
---
  MAINTAINERS                     |   4 +
  drivers/spi/Kconfig             |  26 +++
  drivers/spi/Makefile            |   3 +
  drivers/spi/spi-loongson-core.c | 279 ++++++++++++++++++++++++++++++++
drivers/spi/spi-loongson-pci.c  |  61 +++++++  drivers/spi/spi-loongson-plat.c |
46 ++++++
  drivers/spi/spi-loongson.h      |  47 ++++++
  7 files changed, 466 insertions(+)
  create mode 100644 drivers/spi/spi-loongson-core.c  create mode 100644
drivers/spi/spi-loongson-pci.c  create mode 100644 drivers/spi/spi-loongson-
plat.c  create mode 100644 drivers/spi/spi-loongson.h

diff --git a/MAINTAINERS b/MAINTAINERS
index dfcc5db4bbc0..ab08aba965f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12218,6 +12218,10 @@ M:     Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
  L:     linux-spi@xxxxxxxxxxxxxxx
  S:     Maintained
  F:     Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
+F:     drivers/spi/spi-loongson-core.c
+F:     drivers/spi/spi-loongson-pci.c
+F:     drivers/spi/spi-loongson-plat.c
+F:     drivers/spi/spi-loongson.h

  LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
  M:     Sathya Prakash <sathya.prakash@xxxxxxxxxxxx>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index
3de2ebe8294a..6b953904792e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -516,6 +516,32 @@ config SPI_LM70_LLP
           which interfaces to an LM70 temperature sensor using
           a parallel port.

+config SPI_LOONGSON_CORE
+       tristate
+       depends on LOONGARCH || COMPILE_TEST
+
+config SPI_LOONGSON_PCI
+       tristate "Loongson SPI Controller PCI Driver Support"
+       select SPI_LOONGSON_CORE
+       depends on PCI && (LOONGARCH || COMPILE_TEST)
+       help
+         This bus driver supports the Loongson SPI hardware controller in
+         the Loongson platforms and supports to use PCI framework to
+         register SPI device resources.
+         Say Y or M here if you want to use the SPI controller on
+         Loongson platform.
+
+config SPI_LOONGSON_PLATFORM
+       tristate "Loongson SPI Controller Platform Driver Support"
+       select SPI_LOONGSON_CORE
+       depends on OF && (LOONGARCH || COMPILE_TEST)
+       help
+         This bus driver supports the Loongson SPI hardware controller in
+         the Loongson platforms and supports to use DTS framework to
+         register SPI device resources.
+         Say Y or M here if you want to use the SPI controller on
+         Loongson platform.
+
  config SPI_LP8841_RTC
         tristate "ICP DAS LP-8841 SPI Controller for RTC"
         depends on MACH_PXA27X_DT || COMPILE_TEST diff --git
a/drivers/spi/Makefile b/drivers/spi/Makefile index
28c4817a8a74..3e933064d237 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -71,6 +71,9 @@ obj-$(CONFIG_SPI_INTEL_PLATFORM)      += spi-intel-
platform.o
  obj-$(CONFIG_SPI_LANTIQ_SSC)           += spi-lantiq-ssc.o
  obj-$(CONFIG_SPI_JCORE)                        += spi-jcore.o
  obj-$(CONFIG_SPI_LM70_LLP)             += spi-lm70llp.o
+obj-$(CONFIG_SPI_LOONGSON_CORE)                += spi-loongson-core.o
+obj-$(CONFIG_SPI_LOONGSON_PCI)         += spi-loongson-pci.o
+obj-$(CONFIG_SPI_LOONGSON_PLATFORM)    += spi-loongson-plat.o
  obj-$(CONFIG_SPI_LP8841_RTC)           += spi-lp8841-rtc.o
  obj-$(CONFIG_SPI_MESON_SPICC)          += spi-meson-spicc.o
  obj-$(CONFIG_SPI_MESON_SPIFC)          += spi-meson-spifc.o
diff --git a/drivers/spi/spi-loongson-core.c b/drivers/spi/spi-loongson-core.c
new file mode 100644 index 000000000000..435a58b0d9da
--- /dev/null
+++ b/drivers/spi/spi-loongson-core.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "spi-loongson.h"
+
+static inline void loongson_spi_write_reg(struct loongson_spi *spi, unsigned
char reg,
+                                         unsigned char data) {
+       writeb(data, spi->base + reg);
+}
+
+static inline char loongson_spi_read_reg(struct loongson_spi *spi,
+unsigned char reg) {
+       return readb(spi->base + reg);
+}
+
+static void loongson_spi_set_cs(struct spi_device *spi, bool val) {
+       int cs;
+       struct loongson_spi *loongson_spi =
+spi_master_get_devdata(spi->master);
+
+       cs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG)
+                                          & ~(0x11 << spi->chip_select);

New set/get APIs for accessing spi->chip_select were introduced by
https://github.com/torvalds/linux/commit/303feb3cc06ac0665d0ee9c1414941200e60e8a3
please use these APIs instead of accessing spi->chip_select directly.

okay, I got it. I will use spi_get_chipselect() to replace all spi->chip_select in spi driver.

Thanks.


+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG,
+                                      (val ? (0x11 << spi->chip_select) :

Same here
+                                      (0x1 << spi->chip_select)) | cs);

Same here
+}
+
+static void loongson_spi_set_clk(struct loongson_spi *loongson_spi,
+unsigned int hz) {
+       unsigned char val;
+       unsigned int div, div_tmp;
+       const char rdiv[12] = {0, 1, 4, 2, 3, 5, 6, 7, 8, 9, 10, 11};
+
+       div = clamp_val(DIV_ROUND_UP_ULL(loongson_spi->clk_rate, hz), 2,
4096);
+       div_tmp = rdiv[fls(div - 1)];
+       loongson_spi->spcr = (div_tmp & GENMASK(1, 0)) >> 0;
+       loongson_spi->sper = (div_tmp & GENMASK(3, 2)) >> 2;
+       val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, (val &
~3) |
+                              loongson_spi->spcr);
+       val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, (val &
~3) |
+                              loongson_spi->sper);
+       loongson_spi->hz = hz;
+}
+
+static void loongson_spi_set_mode(struct loongson_spi *loongson_spi,
+                                 struct spi_device *spi) {
+       unsigned char val;
+
+       val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+       val &= ~(LOONGSON_SPI_SPCR_CPOL | LOONGSON_SPI_SPCR_CPHA);
+       if (spi->mode & SPI_CPOL)
+               val |= LOONGSON_SPI_SPCR_CPOL;
+       if (spi->mode & SPI_CPHA)
+               val |= LOONGSON_SPI_SPCR_CPHA;
+
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, val);
+       loongson_spi->mode |= spi->mode; }
+
+static int loongson_spi_update_state(struct loongson_spi *loongson_spi,
+                               struct spi_device *spi, struct
+spi_transfer *t) {
+       unsigned int hz;
+
+       if (t)
+               hz = t->speed_hz;
+
+       if (hz && loongson_spi->hz != hz)
+               loongson_spi_set_clk(loongson_spi, hz);
+
+       if ((spi->mode ^ loongson_spi->mode) & SPI_MODE_X_MASK)
+               loongson_spi_set_mode(loongson_spi, spi);
+
+       return 0;
+}
+
+static int loongson_spi_setup(struct spi_device *spi) {
+       struct loongson_spi *loongson_spi;
+
+       loongson_spi = spi_master_get_devdata(spi->master);
+       if (spi->bits_per_word % 8)
+               return -EINVAL;
+
+       if (spi->chip_select >= spi->master->num_chipselect)

Same here

Regards,
Amit

+               return -EINVAL;
+
+       loongson_spi->hz = 0;
+       loongson_spi_set_cs(spi, 1);
+
+       return 0;
+}
+
+static int loongson_spi_write_read_8bit(struct spi_device *spi, const u8
**tx_buf,
+                                       u8 **rx_buf, unsigned int num) {
+       struct loongson_spi *loongson_spi =
+spi_master_get_devdata(spi->master);
+
+       if (tx_buf && *tx_buf)
+               loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG,
*((*tx_buf)++));
+       else
+               loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG,
0);
+       readb_poll_timeout(loongson_spi->base + LOONGSON_SPI_SPSR_REG,
loongson_spi->spsr,
+                          (loongson_spi->spsr & 0x1) != 1, 1,
+ MSEC_PER_SEC);
+
+       if (rx_buf && *rx_buf)
+               *(*rx_buf)++ = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_FIFO_REG);
+       else
+               loongson_spi_read_reg(loongson_spi,
+ LOONGSON_SPI_FIFO_REG);
+
+       return 0;
+}
+
+static unsigned int loongson_spi_write_read(struct spi_device *spi,
+struct spi_transfer *xfer) {
+       unsigned int count;
+       const u8 *tx = xfer->tx_buf;
+       u8 *rx = xfer->rx_buf;
+
+       count = xfer->len;
+
+       do {
+               if (loongson_spi_write_read_8bit(spi, &tx, &rx, count) < 0)
+                       goto out;
+               count--;
+       } while (count);
+
+out:
+       return xfer->len - count;
+}
+
+static int loongson_spi_prepare_message(struct spi_controller *ctlr,
+struct spi_message *m) {
+       struct loongson_spi *loongson_spi =
+spi_controller_get_devdata(ctlr);
+
+       loongson_spi->para = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_PARA_REG);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG,
+ loongson_spi->para & ~1);
+
+       return 0;
+}
+
+static int loongson_spi_transfer_one(struct spi_controller *ctrl, struct
spi_device *spi,
+                                    struct spi_transfer *xfer) {
+       struct loongson_spi *loongson_spi =
+spi_master_get_devdata(spi->master);
+
+       loongson_spi_update_state(loongson_spi, spi, xfer);
+       if (xfer->len)
+               xfer->len = loongson_spi_write_read(spi, xfer);
+
+       return 0;
+}
+
+static int loongson_spi_unprepare_message(struct spi_controller *ctrl,
+struct spi_message *m) {
+       struct loongson_spi *loongson_spi =
+spi_controller_get_devdata(ctrl);
+
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG,
+ loongson_spi->para);
+
+       return 0;
+}
+
+static void loongson_spi_reginit(struct loongson_spi *loongson_spi_dev)
+{
+       unsigned char val;
+
+       val = loongson_spi_read_reg(loongson_spi_dev,
LOONGSON_SPI_SPCR_REG);
+       val &= ~LOONGSON_SPI_SPCR_SPE;
+       loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG,
+ val);
+
+       loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPSR_REG,
+                              (LOONGSON_SPI_SPSR_SPIF |
+ LOONGSON_SPI_SPSR_WCOL));
+
+       val = loongson_spi_read_reg(loongson_spi_dev,
LOONGSON_SPI_SPCR_REG);
+       val |= LOONGSON_SPI_SPCR_SPE;
+       loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG,
+val); }
+
+int loongson_spi_init_master(struct device *dev, void __iomem *regs) {
+       struct spi_master *master;
+       struct loongson_spi *spi;
+       struct clk *clk;
+
+       master = devm_spi_alloc_master(dev, sizeof(struct loongson_spi));
+       if (master == NULL)
+               return -ENOMEM;
+
+       master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+       master->setup = loongson_spi_setup;
+       master->prepare_message = loongson_spi_prepare_message;
+       master->transfer_one = loongson_spi_transfer_one;
+       master->unprepare_message = loongson_spi_unprepare_message;
+       master->set_cs = loongson_spi_set_cs;
+       master->num_chipselect = 4;
+       device_set_node(&master->dev, dev_fwnode(dev));
+       dev_set_drvdata(dev, master);
+
+       spi = spi_master_get_devdata(master);
+       spi->base = regs;
+       spi->master = master;
+
+       clk = devm_clk_get_optional(dev, NULL);
+       if (!IS_ERR(clk))
+               spi->clk_rate = clk_get_rate(clk);
+       else
+               return dev_err_probe(dev, PTR_ERR(clk), "unable to get
+ clock\n");
+
+       loongson_spi_reginit(spi);
+
+       spi->mode = 0;
+
+       return devm_spi_register_master(dev, master); }
+EXPORT_SYMBOL_NS_GPL(loongson_spi_init_master,
SPI_LOONGSON_CORE);
+
+static int __maybe_unused loongson_spi_suspend(struct device *dev) {
+       struct loongson_spi *loongson_spi;
+       struct spi_master *master;
+
+       master = dev_get_drvdata(dev);
+       spi_master_suspend(master);
+
+       loongson_spi = spi_master_get_devdata(master);
+
+       loongson_spi->spcr = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_SPCR_REG);
+       loongson_spi->sper = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_SPER_REG);
+       loongson_spi->spsr = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_SPSR_REG);
+       loongson_spi->para = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_PARA_REG);
+       loongson_spi->sfcs = loongson_spi_read_reg(loongson_spi,
LOONGSON_SPI_SFCS_REG);
+       loongson_spi->timi = loongson_spi_read_reg(loongson_spi,
+ LOONGSON_SPI_TIMI_REG);
+
+       return 0;
+}
+
+static int __maybe_unused loongson_spi_resume(struct device *dev) {
+       struct loongson_spi *loongson_spi;
+       struct spi_master *master;
+
+       master = dev_get_drvdata(dev);
+       loongson_spi = spi_master_get_devdata(master);
+
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG,
loongson_spi->spcr);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG,
loongson_spi->sper);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPSR_REG,
loongson_spi->spsr);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG,
loongson_spi->para);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG,
loongson_spi->sfcs);
+       loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_TIMI_REG,
+ loongson_spi->timi);
+
+       spi_master_resume(master);
+
+       return 0;
+}
+
+const struct dev_pm_ops loongson_spi_dev_pm_ops = {
+       .suspend = loongson_spi_suspend,
+       .resume = loongson_spi_resume,
+};
+EXPORT_SYMBOL_NS_GPL(loongson_spi_dev_pm_ops,
SPI_LOONGSON_CORE);
+
+MODULE_DESCRIPTION("Loongson SPI core driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-loongson-pci.c b/drivers/spi/spi-loongson-pci.c new
file mode 100644 index 000000000000..c351a689150a
--- /dev/null
+++ b/drivers/spi/spi-loongson-pci.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+// PCI interface driver for Loongson SPI Support // Copyright (C) 2023
+Loongson Technology Corporation Limited
+
+#include <linux/pci.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_pci_register(struct pci_dev *pdev,
+                       const struct pci_device_id *ent) {
+       int ret;
+       void __iomem *reg_base;
+       struct device *dev = &pdev->dev;
+       int pci_bar = 0;
+
+       ret = pcim_enable_device(pdev);
+       if (ret < 0)
+               return dev_err_probe(dev, ret, "cannot enable pci
+ device\n");
+
+       ret = pcim_iomap_regions(pdev, BIT(pci_bar), pci_name(pdev));
+       if (ret)
+               return dev_err_probe(dev, ret, "failed to request and
+ remap memory\n");
+
+       reg_base = pcim_iomap_table(pdev)[pci_bar];
+
+       ret = loongson_spi_init_master(dev, reg_base);
+       if (ret)
+               return dev_err_probe(dev, ret, "failed to initialize
+ master\n");
+
+       return 0;
+}
+
+static void loongson_spi_pci_unregister(struct pci_dev *pdev) {
+       pcim_iounmap_regions(pdev, BIT(0));
+       pci_disable_device(pdev);
+}
+
+static struct pci_device_id loongson_spi_devices[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a0b) },
+       { PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a1b) },
+       { },
+};
+MODULE_DEVICE_TABLE(pci, loongson_spi_devices);
+
+static struct pci_driver loongson_spi_pci_driver = {
+       .name       = "loongson-spi-pci",
+       .id_table   = loongson_spi_devices,
+       .probe      = loongson_spi_pci_register,
+       .remove     = loongson_spi_pci_unregister,
+       .driver = {
+               .bus = &pci_bus_type,
+               .pm = &loongson_spi_dev_pm_ops,
+       },
+};
+module_pci_driver(loongson_spi_pci_driver);
+
+MODULE_DESCRIPTION("Loongson spi pci driver"); MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
diff --git a/drivers/spi/spi-loongson-plat.c b/drivers/spi/spi-loongson-plat.c
new file mode 100644 index 000000000000..2e0388d84044
--- /dev/null
+++ b/drivers/spi/spi-loongson-plat.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Platform driver for Loongson SPI Support // Copyright (C) 2023
+Loongson Technology Corporation Limited
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_platform_probe(struct platform_device *pdev) {
+       int ret;
+       void __iomem *reg_base;
+       struct device *dev = &pdev->dev;
+
+       reg_base = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(reg_base))
+               return PTR_ERR(reg_base);
+
+       ret = loongson_spi_init_master(dev, reg_base);
+       if (ret)
+               return dev_err_probe(dev, ret, "failed to initialize
+ master\n");
+
+       return ret;
+}
+
+static const struct of_device_id loongson_spi_id_table[] = {
+       { .compatible = "loongson,ls2k-spi" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, loongson_spi_id_table);
+
+static struct platform_driver loongson_spi_plat_driver = {
+       .probe = loongson_spi_platform_probe,
+       .driver = {
+               .name   = "loongson-spi",
+               .bus = &platform_bus_type,
+               .pm = &loongson_spi_dev_pm_ops,
+               .of_match_table = loongson_spi_id_table,
+       },
+};
+module_platform_driver(loongson_spi_plat_driver);
+
+MODULE_DESCRIPTION("Loongson spi platform driver");
+MODULE_LICENSE("GPL"); MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
diff --git a/drivers/spi/spi-loongson.h b/drivers/spi/spi-loongson.h new file
mode 100644 index 000000000000..5dca9750efa3
--- /dev/null
+++ b/drivers/spi/spi-loongson.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Header File for Loongson SPI Driver. */
+/* Copyright (C) 2023 Loongson Technology Corporation Limited */
+
+#ifndef __LINUX_SPI_LOONGSON_H
+#define __LINUX_SPI_LOONGSON_H
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+
+#define        LOONGSON_SPI_SPCR_REG   0x00
+#define        LOONGSON_SPI_SPSR_REG   0x01
+#define        LOONGSON_SPI_FIFO_REG   0x02
+#define        LOONGSON_SPI_SPER_REG   0x03
+#define        LOONGSON_SPI_PARA_REG   0x04
+#define        LOONGSON_SPI_SFCS_REG   0x05
+#define        LOONGSON_SPI_TIMI_REG   0x06
+
+/* Bits definition for Loongson SPI register */
+#define        LOONGSON_SPI_PARA_MEM_EN        BIT(0)
+#define        LOONGSON_SPI_SPCR_CPHA  BIT(2)
+#define        LOONGSON_SPI_SPCR_CPOL  BIT(3)
+#define        LOONGSON_SPI_SPCR_SPE   BIT(6)
+#define        LOONGSON_SPI_SPSR_WCOL  BIT(6)
+#define        LOONGSON_SPI_SPSR_SPIF  BIT(7)
+
+struct loongson_spi {
+       struct  spi_master      *master;
+       void __iomem            *base;
+       int                     cs_active;
+       unsigned int            hz;
+       unsigned char           spcr;
+       unsigned char           sper;
+       unsigned char           spsr;
+       unsigned char           para;
+       unsigned char           sfcs;
+       unsigned char           timi;
+       unsigned int            mode;
+       u64                     clk_rate;
+};
+
+int loongson_spi_init_master(struct device *dev, void __iomem *reg);
+extern const struct dev_pm_ops loongson_spi_dev_pm_ops; #endif /*
+__LINUX_SPI_LOONGSON_H */
--
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux