Fixup main control register and bits naming so the match the naming from the datasheet. https://www.st.com/resource/en/datasheet/stpmic1.pdf Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx> --- Changes since v1: - None drivers/mfd/stpmic1.c | 4 ++-- include/linux/mfd/stpmic1.h | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c index 8db1530d9bac..4c9b18d9dec8 100644 --- a/drivers/mfd/stpmic1.c +++ b/drivers/mfd/stpmic1.c @@ -19,7 +19,7 @@ static const struct regmap_range stpmic1_readable_ranges[] = { regmap_reg_range(TURN_ON_SR, VERSION_SR), - regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(MAIN_CR, LDO6_STDBY_CR), regmap_reg_range(BST_SW_CR, BST_SW_CR), regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4), regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), @@ -30,7 +30,7 @@ static const struct regmap_range stpmic1_readable_ranges[] = { }; static const struct regmap_range stpmic1_writeable_ranges[] = { - regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR), + regmap_reg_range(MAIN_CR, LDO6_STDBY_CR), regmap_reg_range(BST_SW_CR, BST_SW_CR), regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4), regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4), diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h index fa3f99f7e9a1..dc00bac24f5a 100644 --- a/include/linux/mfd/stpmic1.h +++ b/include/linux/mfd/stpmic1.h @@ -15,7 +15,7 @@ #define RREQ_STATE_SR 0x5 #define VERSION_SR 0x6 -#define SWOFF_PWRCTRL_CR 0x10 +#define MAIN_CR 0x10 #define PADS_PULL_CR 0x11 #define BUCKS_PD_CR 0x12 #define LDO14_PD_CR 0x13 @@ -148,14 +148,14 @@ #define LDO_BYPASS_MASK BIT(7) /* Main PMIC Control Register - * SWOFF_PWRCTRL_CR + * MAIN_CR * Address : 0x10 */ -#define ICC_EVENT_ENABLED BIT(4) +#define OCP_OFF_DBG BIT(4) #define PWRCTRL_POLARITY_HIGH BIT(3) -#define PWRCTRL_PIN_VALID BIT(2) -#define RESTART_REQUEST_ENABLED BIT(1) -#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0) +#define PWRCTRL_ENABLE BIT(2) +#define RESTART_REQUEST_ENABLE BIT(1) +#define SOFTWARE_SWITCH_OFF BIT(0) /* Main PMIC PADS Control Register * PADS_PULL_CR -- 2.40.0
