On 5/2/23 15:35, Michal Simek wrote:
Hi, the series is syncing the latest dt changes based on board status and the latest DT schema. The patches are based on https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@xxxxxxx/ Thanks, Michal Amit Kumar Mahapatra (2): arm64: zynqmp: Set qspi tx-buswidth to 4 arm64: zynqmp: Add mtd partition for secure OS storage area Ashok Reddy Soma (1): arm64: zynqmp: Fix usb node drive strength and slew rate Michal Simek (15): arm64: zynqmp: Describe TI phy as ethernet-phy-id arm64: zynqmp: Fix usb reset over bootmode pins on zcu100 arm64: zynqmp: Sync node name address with reg (mailbox) arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOM arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOM arm64: zynqmp: Used fixed-partitions for QSPI in k26 arm64: zynqmp: Add gpio labels for modepin gpio arm64: zynqmp: Add pinctrl emmc description to SM-K26 arm64: zynqmp: Switch to ethernet-phy-id in kv260 arm64: zynqmp: Setup clock for DP and DPDMA arm64: zynqmp: Enable DP driver for SOMs arm64: zynqmp: Rename ams_ps/pl node names arm64: zynqmp: Enable AMS on SOM and other zcu10x boards arm64: zynqmp: Describe bus-width for SD card on KV260 arm64: zynqmp: Add phase tags marking Piyush Mehta (1): arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2 Radhey Shyam Pandey (2): arm64: zynqmp: Add L2 cache nodes arm64: zynqmp: Add pmu interrupt-affinity Sai Krishna Potthuri (1): arm64: zynqmp: Add resets property to sdhci nodes Srinivas Neeli (1): arm64: zynqmp: Add linux,code for gpio button .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 15 +- .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 20 +- .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 20 +- .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 321 +++++++++++++----- .../boot/dts/xilinx/zynqmp-zc1232-revA.dts | 2 +- .../boot/dts/xilinx/zynqmp-zc1254-revA.dts | 2 +- .../boot/dts/xilinx/zynqmp-zc1275-revA.dts | 2 +- .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 10 +- .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 10 +- .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +- .../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 32 +- .../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 42 ++- .../boot/dts/xilinx/zynqmp-zcu102-revB.dts | 25 +- .../boot/dts/xilinx/zynqmp-zcu104-revA.dts | 42 ++- .../boot/dts/xilinx/zynqmp-zcu104-revC.dts | 42 ++- .../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 29 +- .../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 29 +- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 33 +- 18 files changed, 513 insertions(+), 165 deletions(-)
I have applied the most of these patches. The rest will be update and sent as v2. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs
