These nodes are example nodes for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.
Examples should go in the bindings or other documentation.
Remove this node.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
.../boot/dts/ti/k3-j721e-beagleboneai64.dts | 24 ------
.../dts/ti/k3-j721e-common-proc-board.dts | 25 ------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 82 -------------------
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 24 ------
4 files changed, 155 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 8a62ac263b89..d77eeff0d81d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -892,35 +892,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
/* Unused */
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 7db0603125aa..87b7263f6547 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -840,35 +840,10 @@ &pcie2_rc {
num-lanes = <2>;
};
-&pcie0_ep {
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
- status = "disabled";
-};
-
-&pcie1_ep {
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
-&pcie2_ep {
- phys = <&serdes2_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
&pcie3_rc {
status = "disabled";
};
-&pcie3_ep {
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 10c8a5fb4ee2..e39f6d1e8d40 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -816,26 +816,6 @@ pcie0_rc: pcie@2900000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie0_ep: pcie-ep@2900000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02900000 0x00 0x1000>,
- <0x00 0x02907000 0x00 0x400>,
- <0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 239 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie1_rc: pcie@2910000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02910000 0x00 0x1000>,
@@ -864,26 +844,6 @@ pcie1_rc: pcie@2910000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie1_ep: pcie-ep@2910000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02910000 0x00 0x1000>,
- <0x00 0x02917000 0x00 0x400>,
- <0x00 0x0d800000 0x00 0x00800000>,
- <0x00 0x18000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 240 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie2_rc: pcie@2920000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02920000 0x00 0x1000>,
@@ -912,26 +872,6 @@ pcie2_rc: pcie@2920000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie2_ep: pcie-ep@2920000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02920000 0x00 0x1000>,
- <0x00 0x02927000 0x00 0x400>,
- <0x00 0x0e000000 0x00 0x00800000>,
- <0x44 0x00000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 241 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie3_rc: pcie@2930000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02930000 0x00 0x1000>,
@@ -960,28 +900,6 @@ pcie3_rc: pcie@2930000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie3_ep: pcie-ep@2930000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02930000 0x00 0x1000>,
- <0x00 0x02937000 0x00 0x400>,
- <0x00 0x0e800000 0x00 0x00800000>,
- <0x44 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 242 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- #address-cells = <2>;
- #size-cells = <2>;
- };
-
serdes_wiz4: wiz@5050000 {
compatible = "ti,am64-wiz-10g";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index f650a7fd66b4..07d3282a583b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -896,35 +896,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
--
2.39.2
