On 2023/5/11 17:15, Walker Chen wrote:
> Add the tdm controller node and pins configuration of tdm for the
> StarFive JH7110 SoC.
>
> Signed-off-by: Walker Chen <walker.chen@xxxxxxxxxxxxxxxx>
> ---
> .../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++++++++++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++++++
> 2 files changed, 61 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 1155b97b593d..19b5954ee72d 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -214,6 +214,40 @@
> slew-rate = <0>;
> };
> };
> +
> + tdm0_pins: tdm0-pins {
> + tdm0-pins-tx {
> + pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
> + GPOEN_ENABLE,
> + GPI_NONE)>;
> + bias-pull-up;
> + drive-strength = <2>;
> + input-disable;
> + input-schmitt-disable;
> + slew-rate = <0>;
> + };
> +
> + tdm0-pins-rx {
> + pinmux = <GPIOMUX(61, GPOUT_HIGH,
> + GPOEN_DISABLE,
> + GPI_SYS_TDM_RXD)>;
> + input-enable;
> + };
> +
> + tdm0-pins-sync {
> + pinmux = <GPIOMUX(63, GPOUT_HIGH,
> + GPOEN_DISABLE,
> + GPI_SYS_TDM_SYNC)>;
> + input-enable;
> + };
> +
> + tdm0-pins-pcmclk {
> + pinmux = <GPIOMUX(38, GPOUT_HIGH,
> + GPOEN_DISABLE,
> + GPI_SYS_TDM_CLK)>;
> + input-enable;
> + };
> + };
> };
>
> &uart0 {
> @@ -221,3 +255,9 @@
> pinctrl-0 = <&uart0_pins>;
> status = "okay";
> };
> +
> +&tdm {
> + pinctrl-names = "default";
> + pinctrl-0 = <&tdm0_pins>;
> + status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 866313570a7e..cfda6fb0d91b 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -366,6 +366,27 @@
> status = "disabled";
> };
>
> + tdm: tdm@10090000 {
> + compatible = "starfive,jh7110-tdm";
> + reg = <0x0 0x10090000 0x0 0x1000>;
> + clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
> + <&syscrg JH7110_SYSCLK_TDM_APB>,
> + <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
> + <&syscrg JH7110_SYSCLK_TDM_TDM>,
> + <&syscrg JH7110_SYSCLK_MCLK_INNER>,
> + <&tdm_ext>;
> + clock-names = "tdm_ahb", "tdm_apb",
> + "tdm_internal", "tdm",
> + "mclk_inner", "tdm_ext";
> + resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
> + <&syscrg JH7110_SYSRST_TDM_APB>,
> + <&syscrg JH7110_SYSRST_TDM_CORE>;
> + dmas = <&dma 20>, <&dma 21>;
> + dma-names = "rx","tx";
> + #sound-dai-cells = <0>;
> + status = "disabled";
> + };
> +
> stgcrg: clock-controller@10230000 {
> compatible = "starfive,jh7110-stgcrg";
> reg = <0x0 0x10230000 0x0 0x10000>;
Hi Conor / Emil,
Based on our discussion a few days ago, the new version of patch for dts looks like this,
Please help to review and provide your comments if you feel free.
Thank you very much!
Best regards,
Walker
