On 2023/5/15 5:46, Aurelien Jarno wrote: > On 2023-04-24 21:54, Xingyu Wu wrote: >> Add driver for the StarFive JH7110 Video-Output clock controller. >> And these clock controllers should power on and enable the clocks from >> SYSCRG first before registering. >> >> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> > > There seems to be something wrong with this patch. Building the kernel > with the whole series applied and with CONFIG_FORTIFY_SOURCE=y triggers > the following kernel bug: > > [ 75.705103] detected buffer overflow in __fortify_strlen > [ 75.710497] ------------[ cut here ]------------ > [ 75.715117] kernel BUG at lib/string_helpers.c:1027! > [ 75.720083] Kernel BUG [#1] > [ 75.722879] Modules linked in: clk_starfive_jh7110_vout(+) nvme_fabrics binfmt_misc starfive_wdt jh7110_trng watchdog sfctemp rng_core drm loop fuse drm_panel_orientation_quirks configfs ip_tables x_tables autofs4 ext4 crc32c_generic crc16 mbcache jbd2 dm_mod nvme nvme_core t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_common xhci_pci xhci_hcd mmc_block dwmac_starfive stmmac_platform stmmac usbcore pcs_xpcs of_mdio fixed_phy fwnode_mdio phylink libphy usb_common dw_mmc_starfive dw_mmc_pltfm clk_starfive_jh7110_isp dw_mmc clk_starfive_jh7110_aon ptp phy_starfive_dphy_rx mmc_core pps_core phy_jh7110_pcie i2c_designware_platform clk_starfive_jh7110_stg phy_jh7110_usb i2c_designware_core > [ 75.785411] CPU: 1 PID: 419 Comm: insmod Not tainted 6.3.1+ #1 > [ 75.791241] Hardware name: StarFive VisionFive 2 v1.2A (DT) > [ 75.796809] epc : fortify_panic+0x1a/0x1c > [ 75.800828] ra : fortify_panic+0x1a/0x1c > [ 75.804838] epc : ffffffff80874242 ra : ffffffff80874242 sp : ffffffc80454b6a0 > [ 75.812054] gp : ffffffff8157f008 tp : ffffffd8c1214f80 t0 : 6465746365746564 > [ 75.819269] t1 : 0000000000000064 t2 : 2064657463657465 s0 : ffffffc80454b6b0 > [ 75.826483] s1 : 0000000000000020 a0 : 000000000000002c a1 : ffffffd8fdd63688 > [ 75.833697] a2 : ffffffd8fdd6f8e8 a3 : 0000000000000000 a4 : 0000000000000000 > [ 75.840912] a5 : 0000000000000000 a6 : ffffffff81426a38 a7 : 0000000000000000 > [ 75.848126] s2 : ffffffff80ec4e00 s3 : ffffffd8d9e28008 s4 : 000000000000001f > [ 75.855340] s5 : 0000000000000000 s6 : ffffffff81580798 s7 : 0000000000ffffff > [ 75.862555] s8 : ffffffd8d9e29ab0 s9 : 0000000000000011 s10: ffffffff017312a0 > [ 75.869770] s11: ffffffff01731450 t3 : ffffffff81592df7 t4 : ffffffff81592df7 > [ 75.876984] t5 : ffffffff81592df8 t6 : ffffffc80454b4a8 > [ 75.882290] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 > [ 75.890199] [<ffffffff80874242>] fortify_panic+0x1a/0x1c > [ 75.895513] [<ffffffff805c7e20>] auxiliary_match_id+0x70/0xcc > [ 75.901262] [<ffffffff805c7f22>] auxiliary_match+0x1e/0x2a > [ 75.906749] [<ffffffff805bd6b0>] __device_attach_driver+0x2c/0xe4 > [ 75.912841] [<ffffffff805bb04e>] bus_for_each_drv+0x70/0xc4 > [ 75.918418] [<ffffffff805bdb0a>] __device_attach+0x94/0x198 > [ 75.923989] [<ffffffff805bde68>] device_initial_probe+0x1a/0x22 > [ 75.929908] [<ffffffff805bc146>] bus_probe_device+0x96/0x98 > [ 75.935482] [<ffffffff805b971e>] device_add+0x56a/0x722 > [ 75.940710] [<ffffffff805c7fc4>] __auxiliary_device_add+0x40/0x92 > [ 75.946803] [<ffffffff80556ff4>] jh7110_reset_controller_register+0x92/0xca > [ 75.953765] [<ffffffff0173034c>] jh7110_voutcrg_probe+0x236/0x2fa [clk_starfive_jh7110_vout] > [ 75.962228] [<ffffffff805bfb40>] platform_probe+0x5e/0xa6 > [ 75.967629] [<ffffffff805bd1e6>] really_probe+0xa0/0x342 > [ 75.972940] [<ffffffff805bd508>] __driver_probe_device+0x80/0x138 > [ 75.979031] [<ffffffff805bd5f8>] driver_probe_device+0x38/0xc4 > [ 75.984863] [<ffffffff805bd83a>] __driver_attach+0xd2/0x1a8 > [ 75.990436] [<ffffffff805baf92>] bus_for_each_dev+0x6c/0xb8 > [ 75.996011] [<ffffffff805bcab6>] driver_attach+0x26/0x2e > [ 76.001325] [<ffffffff805bc384>] bus_add_driver+0x10c/0x1ee > [ 76.006900] [<ffffffff805be5e2>] driver_register+0x52/0xf4 > [ 76.012386] [<ffffffff805bf78e>] __platform_driver_register+0x28/0x30 > [ 76.018827] [<ffffffff01b72028>] jh7110_voutcrg_driver_init+0x28/0x1000 [clk_starfive_jh7110_vout] > [ 76.027802] [<ffffffff8000281a>] do_one_initcall+0x5c/0x1c8 > [ 76.033377] [<ffffffff800a7612>] do_init_module+0x4c/0x1f6 > [ 76.038867] [<ffffffff800a9396>] load_module+0x1a6c/0x1ebe > [ 76.044356] [<ffffffff800a99ea>] __do_sys_finit_module+0x9c/0xf8 > [ 76.050365] [<ffffffff800a9a82>] sys_finit_module+0x1c/0x24 > [ 76.055936] [<ffffffff80003df8>] ret_from_syscall+0x0/0x2 > [ 76.061343] Code: 0800 85aa 3517 007a 0513 7ee5 a097 ffff 80e7 fc20 (9002) 7179 > [ 76.068735] ---[ end trace 0000000000000000 ]--- > I got the recurrence of this with CONFIG_FORTIFY_SOURCE=y. And I found the problem that the reset name of auxiliary_device_id in VOUTCRG is exactly 32 characters. I rename the reset of auxiliary_device_id in VOUTCRG to a shorter name and fix the problem. And I will fix it in next patch. Best regards, Xingyu Wu
