Add a RTL8822BS UART with hci_ver = 0x07. This is similar to RTL8822CS
observed on the Tanix TX6 Android set-top box. But the previous
generation of chip. The RTL8822BS requires the
BROKEN_LOCAL_EXT_FEATURES_PAGE_2 quirk.
Signed-off-by: Rudi Heitbaum <rudi@xxxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 12 +++++++++++-
drivers/bluetooth/hci_h5.c | 6 ++++++
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 2915c82d719d..b53a4ef88550 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -234,7 +234,15 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8822cu_fw.bin",
.cfg_name = "rtl_bt/rtl8822cu_config" },
- /* 8822B */
+ /* 8822BS with UART interface */
+ { IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_UART),
+ .config_needed = true,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8822bs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8822bs_config" },
+
+ /* 8822BU with USB interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_USB),
.config_needed = true,
.has_rom_version = true,
@@ -1182,6 +1190,8 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
hci_set_aosp_capable(hdev);
break;
+ case CHIP_ID_8822B:
+ set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2, &hdev->quirks);
default:
rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
rtl_dev_dbg(hdev, "WBS supported not enabled.");
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index fefc37b98b4a..726b6c7e28b8 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -1072,6 +1072,10 @@ static struct h5_vnd rtl_vnd = {
.acpi_gpio_map = acpi_btrtl_gpios,
};
+static const struct h5_device_data h5_data_rtl8822bs = {
+ .vnd = &rtl_vnd,
+};
+
static const struct h5_device_data h5_data_rtl8822cs = {
.vnd = &rtl_vnd,
};
@@ -1100,6 +1104,8 @@ static const struct dev_pm_ops h5_serdev_pm_ops = {
static const struct of_device_id rtl_bluetooth_of_match[] = {
#ifdef CONFIG_BT_HCIUART_RTL
+ { .compatible = "realtek,rtl8822bs-bt",
+ .data = (const void *)&h5_data_rtl8822bs },
{ .compatible = "realtek,rtl8822cs-bt",
.data = (const void *)&h5_data_rtl8822cs },
{ .compatible = "realtek,rtl8723bs-bt",
--
2.25.1
